All Products

Motorola TLK150 WAVE PTX Mobile Two-Way Radio Nationwide push-to-talk mobile radio with GPS, Wi-Fi, and Bluetooth. FMCSA certified for safe in-vehicle operation. No spectrum licensing required. Requires WAVE PTX subscription. The Motorola TLK150 WAVE PTX Mobile Two-Way Radio combines the broad coverage of a nationwide cellular network with the ease and simplicity of professional two-way communications. By leveraging broadband networks, the TLK150 allows your vehicle fleet to instantly connect across the country without the need for costly spectrum licensing or manual programming. Designed for safe operation while driving, it is FMCSA certified and supports hands-free accessories for single-button PTT communication on the road. Over-the-air device management, GPS tracking, and Wi-Fi connectivity streamline fleet management while delivering loud, clear audio in harsh working environments. Key Features & Benefits Nationwide Coverage: Communicate instantly across a nationwide cellular network without expanding your infrastructure. Over-the-Air Management: Manage devices and talkgroups remotely to simplify fleet updates and software administration. GPS Location Tracking: Built-in GPS tracks the location of vehicles and personnel to enhance operational safety and coordination. Bluetooth Enabled: Supports wireless accessories for flexible, hands-free communication inside the vehicle. FMCSA Certified: Meets strict federal safety regulations for driver operation, ensuring safe PTT communication on the road. Specifications Attribute Details Brand Motorola Solutions Model / SKU TLK150 Product Type Mobile Two-Way Radio Network Nationwide Cellular / Wi-Fi Connectivity Bluetooth, Wi-Fi Location GPS Tracking Compatibility WAVE PTX System Recommended Accessories Motorola PMMN4129 Wideband Compact Microphone — Standard palm microphone for reliable mobile operation. More Resources Motorola WAVE PTX Push-To-Talk Subscription Service Frequently Asked Questions Does the Motorola TLK150 need to be programmed before use? Yes. The TLK150 requires professional configuration and an active WAVE PTX subscription to operate on the nationwide network. This is managed through an online portal rather than traditional Customer Programming Software (CPS). Atlantic Radio provides provisioning and programming services so your equipment is ready to use out of the box. Is a subscription required for this radio? Yes. The TLK150 requires an active Motorola WAVE PTX Push-To-Talk Subscription Service to connect to the nationwide cellular network and operate. Warranty 2-year manufacturer’s warranty.

Read more less

Drop Ceiling Antenna Adapter - P-Mount Phantom Antenna Ground Plane The TE Connectivity TRADCAGP is a drop ceiling antenna adapter designed to provide a ground plane for P-mount Phantom Antennas. This adapter is a crucial component for enabling discreet and professional antenna installations in indoor environments with drop ceilings. Its design ensures optimal signal performance for antennas like the TE Connectivity TRAB4503. Measuring 6 inches by 6 inches, this .016-inch thick ground plane adapter provides a stable and effective base for your antenna. The TE Connectivity TRADCAGP simplifies the installation process, allowing you to securely mount your P-mount Phantom Antennas while ensuring they function at peak performance. Key Features Drop Ceiling Antenna Adapter: Specifically designed for installing antennas in drop ceilings. Ground Plane Adapter: Provides a 6 in. x 6 in. x .016 in. ground plane for enhanced antenna performance. For P-Mount Phantom Antennas: Ensures secure and compatible mounting for this specific type of antenna. Discreet Installation: Enables a clean and professional-looking antenna setup in indoor environments. Durable Construction: Made from sturdy material for a stable and long-lasting installation. Compatibility P-mount Phantom Antennas TRAB4503 Benefits Improved Signal Performance: The ground plane enhances the antenna's signal strength and reliability. Discreet Mounting: Allows for a professional and unobtrusive antenna installation within a drop ceiling. Simplified Installation: Provides a straightforward solution for a ground plane, reducing installation time and complexity. Optimal Functionality: Ensures P-mount Phantom Antennas are properly grounded for peak operational efficiency.   Warranty 1-year manufacturer's warranty

Read more less

Genuine Replacement Rear Housing Assembly Heavy-Duty Structural Repair Chassis for Professional Hytera Handheld Transceivers The Hytera HYT-5116000000640B is a genuine factory replacement rear housing shell engineered to restore the physical integrity, environmental sealing, and structural durability of your portable two-way radios. Manufactured from premium, high-impact polycarbonate (PC EXL1414), this individual component is designed to replace cracked, worn, or physically compromised back covers incurred during severe daily operations. Utilizing authentic factory components ensures that internal electronic assemblies remain safely guarded against catastrophic impact and harsh workspace stresses. This specialized rear housing piece is built to withstand high-temperature exposure and demanding structural impacts, ensuring a perfect physical fit over internal receiver frames. Replacing a compromised shell is crucial for protecting delicate internal motherboards, batteries, and push-to-talk electronic paths from immediate dust and moisture entry. By executing immediate repairs with original hardware, fleet maintenance operators can quickly return fleet radios to active deployment without purchasing entirely new handset transceivers. The assembly interfaces directly with standard original external components, including factory battery rails, accessory ports, belt clips, and external knobs. It features the exact structural tolerances required to maintain the secure seating of your existing internal rubber gaskets and physical shielding seals. Using genuine repair parts safeguards your fleet's long-term equipment investment and maintains proper physical user comfort across extensive shifts. Key Features & Benefits Premium Polycarbonate Construction: Molded from specialized PC EXL1414 material to ensure high structural impact resistance and long-term chassis durability. Perfect Factory Alignment: Engineered to standard factory specifications to ensure absolute structural fitment over internal electronic component trays. Cost-Effective Fleet Recovery: Permits straightforward localized component replacement to eliminate the need for complete radio handset replacements. Original Equipment Reliability: Restores the structural integrity of the radio chassis to guard delicate internal electronics against debris and impacts. Seamless Exterior Integration: Matches original chassis physical attributes seamlessly, maintaining native compatibility with factory belt clips and batteries. Specifications Attribute Details Brand Hytera Model HYT-5116000000640B Product Type Rear Housing Assembly Base Material Polycarbonate PC EXL1414 Component Finish Textured Black Design Purpose Structural Frame Repair Compatibility TD520 Recommended Accessories Hytera BL2010 Lithium-Ion Battery – A high-capacity rechargeable battery pack designed to lock securely onto this rear housing assembly to provide long-lasting operational runtimes. Hytera PC76 USB Programming Cable – A professional data transfer cable engineered to connect your compatible handheld radio directly to a PC for efficient system updates and frequency adjustments. Frequently Asked Questions Is this an authentic factory part or a generic fallback case? This is a genuine factory replacement component manufactured directly by Hytera under part number HYT-5116000000640B. It utilizes the precise design profiles and specialized polymer mixtures necessary to guarantee an absolute structural fit. Does this replacement housing include the internal motherboard or knobs? No, this item consists strictly of the individual black polycarbonate rear housing shell structure. It is designed to replace damaged physical exteriors; all internal electronic components, front faceplates, and knobs must be transferred from your existing radio. What specific plastic blend is used to manufacture this part? This component is molded from advanced PC EXL1414 polycarbonate material. This industrial-grade plastic is chosen specifically for its exceptional impact damping properties and structural stability under extreme operating temperatures. Can this housing shell be installed without specialized technical tools? Performing a chassis transfer requires careful disassembly of the radio frame, which typically requires standard radio service tools like torx drivers. It is highly recommended that repairs be completed by a qualified communications technician to prevent damage to internal antennas or ribbon cords. Will replacing this piece help restore protection against dust and moisture? Yes, installing a new, uncracked rear housing shell eliminates dangerous physical gaps where dirt and water could enter. However, to restore complete sealing parameters, ensure that your existing internal rubber gaskets are completely intact and seated correctly during reassembly.   Warranty 1-year manufacturer's warranty.

Read more less

Six-Pocket Smart Charging Station with Integrated Diagnostic Display Fleet Power and Intelligent Battery Diagnostics for APX Series Radios The Motorola NNTN8897A is a heavy-duty energy management terminal built to organize and maintain large portable radio pools. This charging station features six independent docking pockets that can refresh standalone battery packs or fully assembled handheld units simultaneously. It utilizes an advanced internal distribution circuit to deliver safe, rapid current to your primary communication assets without sacrificing long-term cell health. The Motorola NNTN8897A is the updated version of the Motorola NNTN8897. Engineered for dispatch centers, safety hubs, and heavy industrial facilities, this terminal eliminates the mess of tangled cords by replacing six individual wall adapters with a single power link. The front panel features a bright, four-button LCD status screen that acts as an automated battery analyzer, reading out accurate performance details. This allows warehouse managers or shift supervisors to instantly check battery health before handing equipment out to field personnel. The unit functions on an automated plug-and-play architecture that operates right out of the box without complex network hookups or software installations. High-visibility LED indicator bulbs sit above each pocket to show standby, active charging, or completed states clearly from across a room. This design ensures that team members can swap out drained batteries for fully charged spares in seconds during continuous multi-shift rotations. Key Features & Benefits Automated IMPRES 2 Balancing: Built-in microprocessors evaluate the condition of each docked cell to deliver custom charge rates and eliminate overcharging damage. Six-Pocket Operational Layout: Groups up to six portable devices into a compact footprint to create a clean, centralized power station for your team. Graphic Diagnostics Screen: Built-in display monitors actual milliampere-hour levels, real-time percentages, and estimated time remaining until full. Rapid-Rate Current Supply: Engineered power regulation circuits accelerate replenishment speeds to reduce equipment downtime across your operations. Wide-Voltage Internal Supply: Integrates a switching power converter inside the primary frame, connecting to wall outlets using a standard heavy-duty electrical line cord. Specifications Attribute Details Brand Motorola Model/SKU NNTN8897A Product Type Multi-Unit Charger Charge Pocket Count 6 Pockets Core Technology IMPRES 2 Interface Suite 1 Diagnostic LCD Display Input Rating 120-240 V AC Plug Configuration United States Standard Compatibility APX6000 APX6000XE APX7000 APX7000XE APX8000 APX8000XE APX8000H APX8000HXE SRX2200 What's Included Description SKU/Model Status IMPRES 2 Six-Pocket Multi-Unit Charger NNTN8897A ✅ Included Heavy-Duty AC Power Line Cord US Standard ✅ Included Diagnostic Status Screen Assembly Built-In Frame ✅ Included Replacement Rechargeable Battery Pack Various Models ❌ Sold Separately Recommended Accessories Motorola PMNN4486A IMPRES 2 Smart Battery – A high-capacity waterproof power pack that reports accurate degradation data and health logs directly to this multi-unit analyzer base. More Resources How Motorola IMPRES Technology Enhances Battery Performance Frequently Asked Questions How many batteries can this unit charge at the same time? The station features six independent docking pockets. This allows fleet supervisors to rapidly charge up to six standalone battery packs or completely assembled portable radios at the same time to prevent communication gaps during shift changes. What information does the built-in display screen show? The integrated diagnostic LCD screen functions as a real-time battery analyzer. It displays exact milliampere-hour capacities, current state-of-charge percentages, remaining charge times, and notifications regarding automated reconditioning status. Can this multi-unit station charge standard or legacy battery options? Yes, the internal control systems automatically adapt to safely charge standard non-IMPRES lithium-ion and nickel-metal hydride battery options. However, advanced data tracking and automated reconditioning processes are only active when using official smart cells. Is an external power brick adapter required to run this charger? No, the power conversion board is housed entirely inside the main plastic casing of the unit. The device plugs directly into standard wall outlets using the supplied heavy-duty electrical line cord, keeping your workspace neat and organized. What are the main benefits of IMPRES 2 technology over original models? Internal processing chips deliver up to 40% faster charging speeds for high-capacity battery options. They also introduce advanced storage modes to protect long-term cell life and provide higher diagnostic resolution to get the maximum service life out of your fleet investments.   Warranty 1-year manufacturer's warranty.

Read more less

Hytera ESM14 Detachable C-Style Earpiece with In-line PTT and Mic The Hytera ESM14 is a versatile C-style detachable earpiece with an integrated in-line microphone and Push-to-Talk (PTT) button. This earpiece combines comfort with convenience, making it ideal for professionals who need to communicate clearly and efficiently. It's a popular choice for facilities with shared radio fleets, as additional ES-01 earpieces can be purchased separately for individual users, leading to overall cost savings. The Hytera ESM14 delivers clear audio for both transmitting and receiving messages. Comprising the EH-01 earpiece and the ACM-01 in-line microphone/PTT unit, the ACM-01 component is water resistant, enhancing its durability in various working environments. Key Features Comfortable C-Style Design: Provides a secure and comfortable fit, even during extended use. Detachable Earpiece: Allows easy removal when not needed or for sharing among multiple users. In-line Microphone and PTT: Conveniently located for easy access and operation, enabling hands-free communication. Clear Audio: Delivers clear audio for both transmitting and receiving messages. Cost-Effective Sharing: Designed for environments where radios are shared, allowing individual employees to have their own EH-01 earpiece while sharing the radio and ACM-01 unit. Water Resistant ACM-01 Unit: The quick-connect PTT mic unit offers enhanced durability. Compatibility BD502i BD552i BD612i PD402i PD412i PD482i PD502i PD562i TC-508 TC-518 TC-580 TC-610 TC-700 Benefits Improved Communication Efficiency: Enables clear, hands-free communication, improving productivity in various professional settings. Enhanced Comfort: C-style design ensures comfortable wear throughout long shifts. Cost-Effective Fleet Management: Facilitates easy sharing of radios among multiple employees by allowing individual earpiece purchases. Reliable Performance: Delivers clear audio and features a water-resistant component for durability in demanding environments. Convenient Operation: In-line PTT allows for quick and easy transmission without needing to access the radio directly.   Warranty 1-year manufacturer's warranty

Read more less

Hytera EHM19 C-STYLE DETACHABLE EARPIECE WITH IN-LINE PTT & MICROPHONE The Hytera EHM19 is a C-Style Earpiece with In-line PTT and Microphone. The EHM19 consists of ACM-01 and EH-01. EHM19 COMPATIBILITY: BD502i BD552i PD412i PD502i PD562i TC-518 TC-580 TC-610 TC-700

Read more less

C Style Detachable Earpiece with In-Line Push To Talk Mic The Hytera EHN21 is a detachable C Style Earpiece with In-Line Push to Talk Mic. The unit consists of Hytera Part Numbers EH-01 and ACN-02. This combination is popular for facilities with a large fleet of two-way radios that are shared by multiple employees. One Hytera EHN21 C Style Detachable Earpiece is purchased to be paired with a Hytera two-way radio. Additional EH-01 headsets are purchased for employees resulting in an overall cost savings for the facility.  Key Features Type: C Style Detachable Earpiece with In-Line Push to Talk Mic - Provides hands-free communication with a microphone and earpiece for convenient operation. Hytera Part Numbers: EH-01  and ACN-02 - Consists of these specific Hytera part numbers for compatibility and replacement within the Hytera ecosystem. Weight: about 50 g - Lightweight design minimizes user fatigue and ensures comfortable wear for extended periods. Color: black  PTT Key: available - Includes a push-to-talk key for quick and easy voice transmission. Connector: 13-pin connector  Microphone Sensitivity: -45±3dB  Speaker Power: 10 mW (rated); 30 mW (max.)  Speaker Impedance: 32 Ω±15%  Speaker Frequency Response: 108±3 dB  IP Rating: IP54  Operating Temperature: –20℃ to 60℃ Storage Temperature: –40℃ to 85℃  Compatibility HP782 HP702 HP682 HP602 PD602i PD662i PD682i X1pi Benefits Detachable Design: Allows for easy sharing and cost savings, particularly in workplaces with shared radio systems. Water Resistant PTT: Provides reliable communication in wet conditions, ensuring clarity and functionality in challenging environments. Clear Communication: Designed for clear audio transmission and reception, facilitating effective communication. Warranty 1-year manufacturer's warranty

Read more less

HazLoc Clamshell Battery Pack for Emergency Backup Power Engineered for wildland firefighters and remote operations where traditional charging infrastructure is unavailable. The Motorola PMNN4891A is a heavy-duty, hazardous location (HazLoc) approved clamshell battery pack designed to keep mission-critical portable radios operational during extended deployments. This enclosure allows compatible radios to run on standard, readily available AA batteries, serving as an essential emergency power backup when standard rechargeable battery packs cannot be replenished. The Motorola PMNN4819A is the updated version of the Motorola PMNN4891. Built for public safety professionals, wildland fire crews, and industrial personnel working in rugged or remote environments, this pack solves the problem of radio downtime during prolonged power outages or off-grid field assignments. Before purchasing, buyers should note that the Motorola PMNN4891A requires 12 AA alkaline or lithium primary batteries, which are sold separately, and requires specific radio firmware to ensure proper operational telemetry. To achieve complete compatibility and precise battery level reporting, the host radio must be running firmware version R36.01.00 or greater. Additionally, deploying the Motorola PMNN4891A automatically triggers the radio's low-power setting, and users must ensure their device's low-power operational parameter is configured to 2 Watts or less. Key Features & Benefits Hazardous Location Certified: Fully HazLoc and NIFC approved for safe deployment in volatile or dangerous environments. High Ingress Protection: Features an IP68 ruggedized rating to withstand complete water submersion and blowing dust on challenging job sites. Dual-Chemistry Selector: Includes an internal battery-type switch to optimize telemetry for either 1.5 Volt Alkaline or 1.5 Volt Lithium AA cells. Rapid Toolless Installation: Designed to slide onto the radio chassis rails and securely snap into place using heavy-duty dual side latches. Motorola PMNN4891A Emergency Reliability: Eliminates grid dependency by instantly converting standard off-the-shelf commercial batteries into a dependable radio power source. Specifications Attribute Details Brand Motorola Solutions Model/SKU PMNN4891A Product Type Clamshell Battery Pack Capacity 12 AA Batteries (Alkaline or Lithium Primary) Ingress Protection IP68 Firmware Requirement R36.01.00 or greater Power Restriction Forced low-power mode (2 Watts or less) Dimensions 6.45 Inches x 2.50 Inches x 2.29 Inches Weight (Empty) 9.9 Ounces Compatibility APX6000 APX6000XE APX8000 APX8000XE APX8000H APX8000HXE SRX2200 What's Included Description SKU/Model Status APX HazLoc Clamshell Battery Pack Housing PMNN4891A ✅ Included Internal 12-Cell AA Battery Tray PMNN4891A-Tray ✅ Included 1.5 Volt AA Alkaline or Lithium Batteries Commercial AA ❌ Sold Separately Recommended Accessories Motorola Universal Carry Holster (PMLN7732A) – Provides secure belt-worn transport and quick access for APX series radios during field operations. Motorola UHF Stubby Antenna (FAF5260A) – Compact 470–520 MHz antenna ideal for low-profile wear when the radio is attached to a utility belt. Motorola IMPRES 2 Six-Unit Charger (NNTN8844B) – Centralized multi-pocket charging station to maintain your primary rechargeable fleet batteries. Frequently Asked Questions What types of batteries can be used in the Motorola PMNN4891A? The Motorola PMNN4891A is optimized exclusively for 1.5 Volt AA Lithium primary batteries or 1.5 Volt AA Alkaline primary batteries. You must never use 3.6 Volt Lithium batteries or mix different chemical types within the tray, as this can cause system malfunctions or damage the unit. Does the Motorola PMNN4891A affect the radio's transmission power? Yes, attaching the Motorola PMNN4891A automatically forces the radio into its low-power transmission setting. To ensure proper and reliable operation, your radio's low-power setting must be pre-configured to 2 Watts or less. Is the Motorola PMNN4891A waterproof? The Motorola PMNN4891A features an exceptional IP68 ingress protection rating, making it completely dust-tight and capable of continuous water submersion. This ensures maximum protection and performance in extreme weather conditions and wet environments. Why is my radio showing an incorrect low battery alert with this pack? An incorrect low battery indication usually means the internal Battery-Type-Selector switch is in the wrong position. You must manually toggle the internal switch inside the Motorola PMNN4891A housing to match the exact battery chemistry (Lithium or Alkaline) currently installed in the tray. What firmware version is required for the Motorola PMNN4891A? Your APX portable radio must be programmed with firmware version R36.01.00 or greater to be fully compatible with the Motorola PMNN4891A. Older firmware versions will not recognize the clamshell telemetry or battery status accurately. Can I recharge this pack in a standard Motorola IMPRES desktop charger? No, the Motorola PMNN4891A cannot be placed into a desktop charger. It uses non-rechargeable AA alkaline or lithium cells and must be powered down, opened, and manually replenished with fresh AA batteries when depleted.   Warranty 1-year manufacturer's warranty.

Read more less

Diagnostic Bench Testing Kit for Mobile Fleet Radios Execute flawless mobile radio calibrations with a high-fidelity shielded alignment tool. The Bendix King KAA0609 is a high-grade radio diagnostics tool engineered for professional bench service centers. This genuine Bendix King KAA0609 Test Cable Kit for KNG-M Series Radios establishes a secure hardware bridge between advanced RF communications analyzers and your mobile transceivers. Technicians utilize this multi-conductor testing assembly to check transmitter power, evaluate receiver sensitivity, and perform critical factory alignment cycles. Built to withstand repetitive testing environments, the Bendix King KAA0609 helps maintain accurate diagnostic metrics on communication hardware fleets. It addresses calibration drift by providing low-loss, shielded paths that eliminate RF signal variances during benchmarking. Fleet technicians must know that the KAA0609 requires specialized testing instruments, power configurations, and internal tuning utility software to completely optimize the attached transceivers. Key Features & Benefits Shielded Signal Processing: The Bendix King KAA0609 Test Cable Kit for KNG-M Series Radios isolates line noise and interference during high-wattage mobile radio bench tracking. Factory Alignment Matching: Precision-built to interface perfectly with multi-pin front connections without risking mechanical socket degradation. Heavy-Duty Strain Relief: Constructed using commercial-grade molded sleeves to prevent internal wire breakage under continuous service station manipulation. Low-Loss Configuration: Promotes accurate impedance match parameters for highly repeatable transmitter and receiver test results. Streamlined Diagnostics: Reduces multi-device bench layout complexities by integrating essential power, RF, and data paths into an orderly interface harness. Specifications Attribute Details Brand Bendix King Model/SKU KAA0609 Product Type Test Cable Kit Application Diagnostics, Calibration, and Alignment Compatibility Type Genuine OEM Accessory Compatibility KNG-M150 KNG-M400 KNG-M500 KNG-M800 Frequently Asked Questions What is the primary purpose of the Bendix King KAA0609 test harness? The Bendix King KAA0609 passes concurrent RF signals, power distributions, and tuning telemetry directly from a mobile transceiver to communications service instrumentation. It allows for advanced board-level tracking, transmitter calibration, and automated alignment routines that standard data links cannot perform. Is specialized software required when using this diagnostic kit? Yes, this component provides the physical wiring matrix needed for bench testing. To make internal adjustments, tune transceiver parameters, or update system firmware, the operator must use compatible factory programming utilities and proper RF measurement equipment. Which mobile models will this physical interface kit support? This apparatus is designed exclusively to fit the front-panel accessory connections found on the KNG-M150, KNG-M400, KNG-M500, and KNG-M800 digital lines. It will not attach to legacy platforms or handheld portable devices due to unique plug configuration requirements.   Warranty 1-year manufacturer's warranty.

Read more less

Internal Component Replacement for Digital Portable Fleets Restore exact audio switching control with a genuine factory-grade replacement part. The Hytera HYT-51010200000068 is a precision-engineered internal hardware component built explicitly for terminal repair and maintenance. This genuine Hytera HYT-51010200000068 Voice Switch for HP782 serves as an essential electrical contact assembly, enabling reliable push-to-talk modulation, channel toggle signals, or programmable voice criteria processing within the handset housing. Known by factory designation R08717NS-SP13S7.0-B103-0098, this sub-assembly ensures micro-volt circuits route properly to maintain uninterrupted field communications. Engineered to withstand rigorous daily operation, the Hytera HYT-51010200000068 addresses internal button fatigue or contact failures resulting from prolonged industrial use. The internal mechanics of the HYT-51010200000068 are rated for a robust operational lifespan to keep critical commercial gear deployable. Before purchasing, service center technicians must note that the Hytera HYT-51010200000068 requires meticulous board-level installation tools and solder-point precision to ensure correct integration inside high-tier digital transceivers. This surface-mount voice element features an advanced environmental seal designed to defend internal boards against external contaminants. Incorporating an explicit sub-surface barrier, the HYT-51010200000068 helps the finished handheld radio frame retain its strict submersible protection protocols after a full technical overhaul. Key Features & Benefits OEM Schematic Accuracy: The Hytera HYT-51010200000068 Voice Switch for HP782 delivers direct physical and electrical replacement alignment to prevent control board short circuits. Submersible Protection: Built to meet factory sub-molding standards, helping repaired gear maintain optimal defense levels against liquid ingress. Industrial Climate Tolerance: Thermally rated to operate seamlessly without contact sticking across extreme occupational temperature variations. Tactile Lifecycle Resiliency: Crafted with premium micro-spring arrays that resist long-term mechanical degradation throughout demanding shift work cycles. Low Current Draw Optimization: Designed specifically to modulate lower electrical potentials safely without causing excessive vehicle or portable battery drainage. Specifications Attribute Details Brand Hytera Model/SKU HYT-51010200000068 Product Type Voice Switch Factory Sub-Model R08717NS-SP13S7.0-B103-0098 Voltage Rating DC 10V / AC 50V Current Rating 5mA Operating Temperature -30°C to +80°C Dimensions 22.5 mm x 7.7 mm x 9.35 mm IP Rating IPX7 Lifecycle Rating LIFE 5W Compatibility HP702 HP782 Recommended Accessories Hytera HP782 Professional DMR Portable Radio (HP782) — High-performance commercial transceiver utilizing this exact internal voice control module.  Hytera HP702 Durable Portable Two-Way Radio (HP702) — Heavy-duty display terminal relying on this micro-switch component for physical audio paths.  More Resources How to Use a Hytera Two-Way Radio: Programming, Channels, and Everyday Use Frequently Asked Questions Is soldering required to install the Hytera HYT-51010200000068 voice switch? Yes, the HYT-51010200000068 is an unmounted surface component designed for direct integration on the internal circuit architecture. Professional precision soldering equipment, specific flux compounds, and board-level micro-component repair training are necessary to perform this replacement safely. Will replacing this internal switch compromise the waterproof rating of my radio? The Hytera HYT-51010200000068 features built-in IPX7 capabilities to preserve structural defense limits. However, the overall environmental rating of the completed terminal depends entirely on proper housing realignment and fresh chassis gasket placement during reassembly. Can this micro-switch component be used in other radio series? This specific switch layout carries precise dimension specifications of 22.5 mm by 7.7 mm by 9.35 mm engineered exclusively for the internal spatial profiles of the HP702 and HP782 frames. It will not align correctly within older legacy or alternate series chassis.   Warranty 1-year manufacturer's warranty.

Read more less

Desktop Dispatch Microphone for Mobile Base Stations Streamline base station dispatch operations with a heavy-duty stable desktop microphone. The Bendix King KAA0258 is a professional-grade base station audio accessory engineered for fixed dispatch environments. This premium Bendix King KAA0258 Desktop Microphone for KNG-M150 provides public safety, forestry, and industrial dispatchers with clear, intelligible voice transmission over mobile communication setups. Built with an ergonomic housing and a weighted non-slip base, this dispatch microphone stays firmly in position during fast-paced operational communication adjustments. Designed for emergency command centers and fleet dispatch desks, the Bendix King KAA0258 resolves the strain of using handheld mics during prolonged dispatch monitoring shifts. This fixed station console solution features an easily accessible, tactile push-to-talk mechanical lever and a dedicated monitor button to check channel activity smoothly. Command personnel must know that this model connects directly via the front panel accessory interface of compatible KNG-M series mobile transceivers, converting your standard vehicle radio into a fully functioning desktop base station. Key Features & Benefits Weighted Base Design: Integrated weighted chassis with rubberized feet ensures the Bendix King KAA0258 Desktop Microphone for KNG-M150 remains stationary during intensive use. Tactile PTT Control: Features an extended mechanical Push-To-Talk lever that locks smoothly into place for effortless continuous transmission. Crystal-Clear Audio: Professional internal cartridge delivers crisp voice modulation while reducing surrounding background ambient office noise. Dedicated Monitor Button: Allows dispatch operators to instantly bypass squelch controls to verify channel traffic prior to transmitting. Plug-and-Play Assembly: Connects seamlessly into the native front-panel mic port of mobile units without requiring specialized adapters. Specifications Attribute Details Brand Bendix King Model/SKU KAA0258 Product Type Desktop Microphone Application Public Safety Dispatch, Base Station Operations Control Type Large PTT Lever, Monitor Toggle Base Style Weighted Non-Slip Rubber Base Compatibility KNG-M150 KNG-M400 KNG-M500 KNG-M800 More Resources How to Connect a Radio to a Battery Safely (Car and Mobile Install Basics) Frequently Asked Questions Does this desktop microphone require an external power supply to operate? No, the Bendix King KAA0258 draws its operating voltage directly from the connected mobile transceiver's front-panel accessory port. No additional external batteries, wall bricks, or auxiliary power lines are required. Can the KAA0258 be deployed inside a standard vehicle setup? This audio console is engineered strictly for flat, stable desktop surfaces found in base stations and dispatch offices. Due to its weighted footprint and stationary orientation, it is not recommended for mobile in-vehicle mounting or rough off-road environments. Is this model compatible with legacy BK portable series radios? The KAA0258 is explicitly constructed with a connector pattern configured for the KNG-M mobile radio tier. It will not interface with portable handheld devices like the KNG-P series or legacy DPH platforms.   Warranty 1-year manufacturer's warranty.

Read more less

Diagnostic Alignment Interface for Fleet Servicing Establish an uncompromised testing link with factory-certified service equipment. The Hytera HYT-5105990000412A Test Cable for X1c is a specialized bench service tool designed exclusively for technical communication environments. This genuine Hytera HYT-5105990000412A assembly allows electronics technicians to connect two-way radios directly to RF service monitors, signal analyzers, and automated calibration fixtures. By providing a stable, low-loss physical bridge, this hardware facilitates exact tuning and diagnostics for the X1c and X1e discrete digital series. Engineered to handle regular maintenance shop workflows, the Hytera HYT-5105990000412A eliminates testing variances caused by unshielded connections or generic adapters. This comprehensive kit features the factory-certified harness assembly identified by production reference number 4291900000000, ensuring total schematic compatibility during testing procedures. Service providers must know that this alignment apparatus is vital for checking power output and frequency error thresholds on both the X1c and X1e platforms. Please note that the HYT-5105990000412A is engineered solely for stationary bench testing and component-level calibration. It requires external RF power meters or professional alignment software to function, which means the HYT-5105990000412A cannot be used for standard operational field operations. It interfaces securely with the side accessory track of the X1c or X1e radios to prevent unexpected data packet dropouts during deep-dive technical overhauls. Key Features & Benefits RF Diagnostic Optimization: The Hytera HYT-5105990000412A Test Cable for X1c delivers shielded signal isolation required for precise receiver and transmitter alignments. Factory Harness Quality: Includes reference set number 4291900000000 to maintain strict matching standards for impedance and voltage paths. Dedicated Service Port Match: Crafted specifically to lock perfectly onto the unique side accessory terminal found on the X1c and X1e handheld frames. Durable Shop Resilience: Molded with heavy-duty strain reliefs to withstand repetitive connections on technical diagnostic radio benches. Calibration Precision: Prevents measurement drift during sensitive system tune-ups, protecting your high-tier digital assets from firmware testing damage. Specifications Attribute Details Brand Hytera Model/SKU HYT-5105990000412A Product Type Test Cable Kit Application Radio Diagnostics, Tuning, and Alignment Factory Reference 4291900000000 Compatibility Type Genuine OEM Accessory Compatibility X1c X1e Recommended Accessories Hytera X1e Portable Radio (X1e) — Ultra-thin covert digital two-way radio that physically interfaces with this diagnostic calibration test cable.  Hytera CH10L16 Dual-Pocket Charger — Essential desktop dual-pocket rapid charging cradle designed for matching covert fleet batteries.  Hytera AN0158H05 VHF Stubby Antenna — Low-profile helical stubby antenna built for the ultra-thin discrete portable radio series. More Resources More Resources Considerations To Make When Buying Replacement Hytera Parts Frequently Asked Questions What is the difference between this kit and a standard programming cable? This specialized bench tool is designed to route RF signals, power distributions, and multi-point telemetry data simultaneously to specialized service equipment. A standard programming data cable only carries low-voltage USB serial data for codeplug management, whereas the HYT-5105990000412A enables deep-dive electrical testing and board alignment. Is additional software required to utilize the HYT-5105990000412A harness? Yes, this hardware assembly is purely a physical connection tool. Performing full alignments or tuning cycles requires official factory service software alongside standalone diagnostic instrumentation like an RF communications analyzer. Which specific radio models will this calibration cable fit? This cable is engineered explicitly for the hardware interface profiles of the covert X1c and X1e models. It will not attach to standard industrial models or alternate series platforms due to unique connector footprint limitations.   Warranty 1-year manufacturer's warranty.

Read more less

VHF/UHF Dual Band Mobile Transceiver for Simultaneous Multi-Frequency Monitoring Equip your base station or automotive dashboard with 50 Watts of selectable dual-band RF power. The Icom 2730A is a premium multi-frequency radio system engineered for reliable cross-band communication. This genuine Icom 2730A VHF/UHF Dual Band Mobile Transceiver for Amateur Radio delivers a powerful 50 Watts of RF transmission capabilities across both the 2-meter (144–148 MHz) and 70-centimeter (420–450 MHz) operational spectrums. Featuring an advanced dual-receive architecture, the Icom 2730A allows radio operators to monitor VHF/VHF, UHF/UHF, or mixed frequency combinations concurrently with entirely independent audio volume and squelch adjustments. Perfect for amateur operators, skywarn spotters, and mobile utility teams, the Icom 2730A simplifies tracking dual channels simultaneously while driving or operating a stationary command setup. The physical interface uses a detached remote controller layout with a high-contrast white backlit LCD screen that provides quick frequency legibility at a glance. To facilitate secure hands-free automotive execution, the 2730A can be upgraded to support the wireless VS-3 Bluetooth headset, though operators must install the internal UT-133/A processing module to establish the wireless configuration. Before completing deployment planning, buyers must note that the remote display controller and main body housing ship as standalone units to provide maximum cabin mounting flexibility. Coupling the controller faceplate directly to a flat surface or holding it via an auxiliary suction pedestal requires separate installation brackets such as the MBA-5 or MBA-4 mechanical plates. Furthermore, the integrated wideband receiver built into the Icom 2730A allows for continuous surveillance of civilian aviation AM airbands, marine channels, and weather frequencies outside standard ham spectrum boundaries. Key Features & Benefits Simultaneous Dual Receive: The Icom 2730A VHF/UHF Dual Band Mobile Transceiver for Amateur Radio checks two active signals concurrently with separate dedicated controller dials. High-Power RF Performance: Selectable 50-Watt, 15-Watt, or 5-Watt power thresholds optimize battery consumption and maximize coverage thresholds. Bluetooth Operational Readiness: Accommodates optional hands-free components and wireless voice-activated VOX functions for elevated in-vehicle driver safety. Enhanced Contrast Display: Fitted with an expanded white backlit LCD display that is 1.5 times larger than previous generations for rapid alpha-numeric identification. Split Tone Coordination: Permits independent sub-audible CTCSS and DTCS signaling values for modern repeater split-frequency channels. Specifications Attribute Details Brand Icom Model/SKU 2730A Product Type Mobile Transceiver Frequency Range VHF 144–148 MHz Frequency Range UHF 420–450 MHz Wideband Receiver RX 118–174 MHz / 375–550 MHz Power Output 50W / 15W / 5W Selectable Channels 1000 Regular / 2 Call / 50 Scan Edges Dimensions Main Unit 5.91 × 1.57 × 5.94 Inches Dimensions Controller 5.91 × 1.97 × 1.07 Inches Weight Main Unit 2.65 lbs Weight Controller 0.31 lbs Model Variations Model Key Difference 2730A 35 White backlit LCD display model layout configuration 2730B 55 USA High-contrast black display screen variation footprint Compatibility MBA4 MBA5 MBF1 VS3 UT133A HM207 OPC837 OPC345 What's Included Description SKU/Model Status Main Radio Transceiver Chassis 2730A ✅ Included Remote Display Control Head 2730A Controller ✅ Included Remote Control Hand Microphone HM-207 ✅ Included Controller Interface Cable OPC-837 ✅ Included Inline Fused DC Power Harness OPC-345 ✅ Included Hand Microphone Hanger Clip Hanger ✅ Included Remote Control Head Mount Bracket MBA-5 ❌ Sold Separately Wireless Bluetooth Headset VS-3 ❌ Sold Separately Internal Bluetooth Board Chipset UT-133/A ❌ Sold Separately Recommended Accessories Icom MBA-5 Controller Bracket for 2730A ( MBA5) — Essential structural mounting adapter required to attach or surface-mount the remote display head. Icom MBA-5 Controller Bracket for 2730A Icom UT133 Internal Bluetooth Board (UT133) — Mandatory internal daughterboard chip required to enable wireless headset connectivity options. Icom UT133 Internal Bluetooth Board Bluetooth Headset (VS3) More Resources 2730A Instructions Manual Atlantic Radio Blog: Tips for Mounting and Installing Icom Mobile Radios Frequently Asked Questions Does the controller attach to the main unit out of the box? No, the control faceplate and the main transceiver body are designed as detached modules to enable flexible vehicle installation options. To mount them together as a single unified radio piece, you must purchase the optional MBA-4 combining bracket separately. Is the VS-3 Bluetooth headset included with this mobile radio? No, the wireless VS-3 headset is sold separately. Activating the integrated hands-free Bluetooth audio features also requires the installation of the internal UT-133/A Bluetooth receiver board inside the radio chassis. Can the Icom 2730A receive civilian aviation frequencies? Yes, the wideband receiver built into this transceiver supports continuous scanning of the civilian airband spectrum from 118 MHz to 136 MHz in AM mode, alongside standard marine and public safety frequencies.   Warranty 1-year manufacturer's warranty.

Read more less

Hytera EAN23 Earpiece with Acoustic Tube & Detachable PTT/MIC Cable The Hytera EAN23 is a high-quality earpiece kit that includes the Hytera ACN-01 and EA-01 components, offering a versatile and discreet communication solution. This black earpiece features a comfortable acoustic tube and a detachable in-line Push-to-Talk (PTT) and microphone cable, allowing for flexible use and easy replacement of individual parts. It's designed for professionals who require clear, hands-free communication while maintaining situational awareness. Weighing approximately 60g and boasting an IP54 rating for protection against dust and splashing water, the Hytera EAN23 is lightweight and built for comfort and durability during extended wear in various demanding environments. With a sensitive microphone and powerful speaker, this earpiece delivers crisp audio for both transmission and reception, ensuring reliable communication for compatible PD7 series, PD985, and PT5 series radios. Key Features Detachable Acoustic Tube: Allows for easy cleaning and replacement, enhancing hygiene and longevity. Detachable In-line PTT and Microphone: Provides convenient push-to-talk functionality and clear voice pickup, with the flexibility to replace the cable. IP54 Rating: Offers protection against dust and splashing water, ensuring reliable performance in various environments. High-Quality Audio: Features a sensitive microphone (–45±3 dB) and powerful speaker (10 mW rated, 300 mW max) for clear communication. Lightweight Design: Weighs about 60g, ensuring comfort during long periods of use. Ergonomic Behind-Ear Fit: The acoustic tube design provides discreet and comfortable wear. Wide Operating Temperature: Functions reliably in temperatures from –20℃ to 60℃, suitable for diverse conditions. Compatibility PD985 PD755 PD785 PD705 PT560H PT580HPLUS Benefits Discreet Communication: The acoustic tube allows for private listening, ideal for security or customer-facing roles. Hands-Free Operation: Integrated PTT and microphone enable communication without needing to hold the radio, improving efficiency and safety. Enhanced Durability: IP54 rating protects against environmental elements, extending the lifespan of the earpiece. Clear Audio Performance: High-quality speaker and microphone ensure messages are transmitted and received clearly, even in moderate noise. Cost-Effective Maintenance: Detachable components allow for individual part replacement, rather than needing a whole new unit. Comfortable Extended Wear: Lightweight design and ergonomic fit minimize fatigue during long shifts.   Warranty 1-year manufacturer's warranty

Read more less

Wireless Bluetooth Headset with Boom Microphone The Motorola RLN6500A is a Bluetooth accessory kit designed for professionals who need reliable and comfortable wireless communication throughout their workday. This kit includes a wireless earpiece with a boom microphone and an in-line push-to-talk (PTT) button, offering up to eight hours of battery life and a secure, comfortable fit. Key Features Wireless: Bluetooth connectivity for freedom of movement Battery Life: Up to 8 hours of talk time Design: Swivel earpiece with boom microphone PTT: In-line PTT button Comfort: Designed for comfortable, all-day wear Dimensions: 1" (W) x 2" (H) x 1" (L) Compatibility APX1000I APX900 DEP550 DEP550E DEP570 DEP570E DGM5000E DGM5500E DGM8000E DGM8500E DGP4100 DGP5050E DGP5550E DGP6100 DGP8050E DGP8050E ELITE DGP8550E DP4400E DP4401E DP4600E DP4601E DP4800E DP4801E GP328DPLUS SL7550 SL7550E SL7580 SL7580E SL7590 SL7590E SL8050 SL8550 SL8550E XIRP8600I XIRP8808R XPR3300 XPR3300E XPR3500 XPR3500E XPR3550 XPR3550E XPR5350 XPR5350E XPR5380 XPR5380E XPR5550 XPR5550E XPR5580 XPR5580E XPR6350 XPR6380 XPR6550 XPR6580 XPR7350 XPR7350E XPR7380 XPR7380E XPR7550 XPR7550E XPR7580 XPR7580E R5 Benefits Extended Use: Long battery life supports a full business day. Comfortable Fit: Designed for comfortable, all-day wear. Secure Connection: Swivel earpiece stays securely in place. Clear Communication: Boom microphone provides clear audio. Hands-Free Operation: Allows for convenient communication while keeping your hands free.   Warranty 1-year manufacturer's warranty.

Read more less

Internal VHF Duplexer for Seamless SLR1000 Repeater Integration Enhance your professional radio infrastructure with a high-performance internal duplexer designed to eliminate signal interference and optimize two-way radio repeater transmissions. The Motorola HKFD1000A is a premium VHF internal duplexer engineered specifically for the MOTOTRBO SLR1000 repeater. Designed to operate flawlessly within the 136-156 MHz frequency range, the Motorola HKFD1000A allows your repeater to transmit and receive signals simultaneously using a single antenna. This critical piece of infrastructure hardware reduces deployment complexity while maximizing signal integrity for your network. Ideal for system integrators, public safety networks, and commercial enterprise radio systems, the Motorola HKFD1000A features a precise 4-6 MHz TX/RX separation spacing. By isolating the transmitting and receiving frequencies, the Motorola HKFD1000A effectively prevents desensitization and interference. It is purpose-built to mount directly inside the SLR1000 housing, preserving the repeater’s compact, low-profile footprint without the need for external mounting brackets or excess cabling. Please note that a duplexer like the Motorola HKFD1000A must be professionally tuned to your specific TX and RX frequencies prior to deployment to ensure optimal performance and prevent potential damage to your repeater infrastructure. Key Features & Benefits Precise Signal Isolation: Features a 4-6 MHz TX/RX spacing to prevent interference between transmitting and receiving signal paths. Space-Saving Design: Engineered to mount seamlessly inside the SLR1000 repeater housing for a clean, compact installation. Single Antenna Operation: Eliminates the need for multiple site antennas, reducing infrastructure costs and deployment complexity. Rugged Reliability: Built to Motorola’s exacting OEM standards for continuous operation in demanding professional environments. Optimized VHF Coverage: Specifically tuned for the 136-156 MHz band to maximize lower-band propagation and signal clarity. Specifications Attribute Details Brand Motorola Model/SKU HKFD1000A Product Type Internal Duplexer Frequency Band VHF Frequency Range 136-156 MHz TX/RX Spacing 4-6 MHz Mounting Style Internal (Repeater Housing) Compatibility SLR1000 Recommended Accessories Motorola SLR1000 Repeater for Two-Way Radios (SLR1000) — Extend your communication coverage with this durable, low-profile digital repeater that seamlessly houses your internal duplexer. More Resources Key Features of Motorola Digital Repeaters for Business Use Frequently Asked Questions What is the frequency range of the Motorola HKFD1000A? The Motorola HKFD1000A is specifically designed to operate on the VHF frequency band between 136-156 MHz. It utilizes a 4-6 MHz TX/RX spacing to isolate transmissions and prevent signal interference. Do I need external mounting brackets for this duplexer? No. The Motorola HKFD1000A is an internal duplexer custom-engineered to mount directly inside the Motorola SLR1000 repeater housing, eliminating the need for external brackets or extended cabling. Does the Motorola HKFD1000A require tuning before use? Yes. Like all professional duplexers, the Motorola HKFD1000A must be accurately tuned to your specific transmit and receive frequencies prior to deployment to ensure optimal performance and repeater health.   Warranty The Motorola HKFD1000A includes a standard 1-year manufacturer's warranty.

Read more less

Internal Tuning Duplexer for Compact Repeaters Single-Antenna Operations for UHF Infrastructure Streamline your wireless infrastructure footprint by enabling your repeater to transmit and receive simultaneously through a single antenna feedline. Consolidate your hardware footprint at your station site by employing a specialized internal radio frequency filtering component. This commercial-grade duplexer manages high-isolation signal routing across the core UHF spectrum. By allowing a single transceiver setup to process incoming and outgoing voice traffic at the exact same time over one coaxial transmission line, this module removes the logistical need to install, space out, and maintain two separate external antennas. The Motorola HKFE4001A is the updated version of the Motorola HKFE4001. Tailored to preserve the compact physical size of your low-power base station, the filter mechanism mounts cleanly right inside the primary equipment shell. The milled metal cavities deliver clean channel separation, preventing transmitter overflow from overwhelming the receiver circuit. This heavy-duty shielding ensures maximum sensitivity and coverage range even during prolonged communication windows in unventilated equipment closets or outdoor utility enclosures. Integrating this component maintains uncompromised performance across your localized coverage area without degrading signal strength. Because the module fits entirely within the pre-existing housing layout, the upgrade preserves all original weatherproofing characteristics when sealed properly with factory gaskets. This component provides an exceptionally practical option for space-restricted environments like mobile emergency command trailers, industrial roof structures, and remote solar stations. Key Features & Benefits Single Antenna Optimization: Integrates transmit and receive paths onto one coaxial cable, lowering structural antenna lease overhead. High RF Isolation: Delivers exceptional frequency separation across the 430–480 MHz band to prevent cross-channel interference. Direct Internal Mounting: Installs cleanly inside the repeater chassis enclosure to maintain a space-saving, low-profile architecture. Low Insertion Loss: High-efficiency cavity engineering prevents signal degradation, ensuring maximum transmitter power reaches the airwaves. Industrial-Grade Reliability: Thermally stable metal housing withstands fluctuating temperatures inside sealed outdoor infrastructure housings. Specifications Attribute Details Brand Motorola Solutions Model/SKU Motorola HKFE4001A (HKFE4001) Product Type Internal Cavity Duplexer Frequency Band UHF (430–480 MHz) Mounting Location Internal Chassis Device Compatibility Low-Power Infrastructure Base Stations Recommended Accessories Motorola SLR1000 MOTOTRBO Compact Repeater - Motorola SLR1000 — The primary compact infrastructure repeater that houses this internal duplexer for single-antenna operations. More Resources Key Features of Motorola Digital Repeaters for Business Use 4 Benefits of Using Two-Way Radio Repeaters Frequently Asked Questions What specific frequency range does this duplexer support? The HKFE4001A is designed to operate within the UHF band, covering frequencies from 430 MHz to 480 MHz, and must be precisely tuned to your specific TX and RX frequencies. Does this duplexer come pre-tuned from the factory? No. Cavity duplexers must be manually benched-tuned using a network analyzer to match your organization's exact FCC-licensed frequencies before deployment to avoid equipment damage. Can I install this module myself inside the SLR1000? Yes, it is designed for direct internal integration. However, because it requires specialized RF jumper routing and precise alignment tuning, installation by a certified radio communications technician is strongly recommended.   Warranty 1-year manufacturer's warranty.

Read more less

Professional Programming Software and Hardware Interface Solution Optimize your wireless data infrastructure with complete factory-authorized radio configuration files. The Ritron DTXP2-PCPK-HP-1 is an essential original equipment manufacturer (OEM) setup designed to manage high-power data transceivers. This Ritron DTXP2-PCPK-HP-1 Programming Software Kit for DTX Plus Radios includes both the proprietary system configuration software and the heavy-duty physical interface cables required to link transceivers directly to a workstation. Deploying the official Ritron DTXP2-PCPK-HP-1 eliminates communication link failures and data transfer timeouts during technical field provisioning. Engineered specifically for telemetry technicians, remote system administrators, and industrial SCADA system integrators, this comprehensive kit allows for complete administrative oversight of radio frequencies and signaling profiles. The package includes the DTXP2-PCPS-1 programming software delivered securely on a USB thumb drive, an advanced 60201126 cable assembly, and a 9/USB-PAS 6-pin adapter block. Because this kit features licensed configuration files and digital assets, it is classified as a non-refundable final sale. Key Features & Benefits Complete Interface Solution: The authentic Ritron DTXP2-PCPK-HP-1 Programming Software Kit for DTX Plus Radios includes all necessary hardware cords and conversion nodes for flawless computer linkages. USB Software Distribution: Preloads the proprietary DTXP2-PCPS-1 application tools onto a high-performance USB drive to support modern PC workstations without optical drives. Granular Frequency Tuning: Gives system technicians direct access to program customized transmit and receive channels, bandwidth spaces, and squelch constants. Industrial Grade Harnessing: Features the heavy-duty 60201126 cable assembly alongside a robust DTXP-PAC-HP programming cable built to withstand bench testing environments. Full Operational Overhaul: Enables full technical control over transmitter power output levels, power saving intervals, and telemetry communication cycles. Specifications Attribute Details Brand Ritron Model/SKU DTXP2-PCPK-HP-1 Software Identifier DTXP2-PCPS-1 Physical Interface USB to 6-Pin Configuration Target DTX Plus High Power Transceivers Compatibility DTX-165-0BN30I-SIG DTX-465-0BN30I-SIG What's Included Description SKU/Model Status Programming Software USB Stick DTXP2-PCPS-1 Included Main Cable Assembly Line 60201126 Included USB to 6-Pin Adapter Block 9/USB-PAS Included High Power Programming Cable DTXP-PAC-HP Included Recommended Accessories Compatible Radios Ritron RQX-411-BLK UHF Analog Callbox – Industrial weather-resistant outdoor callbox operating across commercial wireless frequencies. Related Programming Tools Ritron RQX-PCPK-1 PC Programming Kit for Callboxes – Specialized PC linkage package used for provisioning standard Q series emergency wireless stations. Ritron RQT-PCPS-2 Programming Software for RQA/RQT Series – Standalone configuration software thumb drive for specialized paging transceiver equipment. Ritron 60201119 Programming Cable – Compatible programming cable for Ritron callbox and transceiver configuration workflows. Frequently Asked Questions What is the primary purpose of the Ritron DTXP2-PCPK-HP-1 kit? The toolkit delivers the proprietary factory configuration application along with the exact physical adapter cables needed to connect high-power transceivers to your computer. Which specific wireless data modules does this software kit support? This kit is engineered to program and configure Ritron DTX Plus high-power wireless transceivers, including the DTX-165-0BN30I-SIG and DTX-465-0BN30I-SIG telemetry modules. Does this programming software run on macOS operating systems? No, the configuration utilities and drivers enclosed within this software package are built strictly for Microsoft Windows desktop deployment environments. What is the role of the 9/USB-PAS adapter block inside this package? The 9/USB-PAS acts as the active hardware adapter that converts standard USB computer data streams into the proper 6-pin serial signals required by the radio motherboard. Are the physical radio interface cables included with this purchase? Yes, this is a complete hardware and software bundle containing the 60201126 cable assembly, the 9/USB-PAS adapter, and the DTXP-PAC-HP high-power programming cord. Can I return this programming kit if it does not work for my system? No, because this product contains active administrative software distributions and licenses, it is non-refundable and represents a final sale transaction.   Warranty Please note that this product is a final sale item. To ensure safety and quality standards or due to custom factory programming/licensing, we cannot accept returns or exchanges on this specific model. If you have any compatibility questions, please contact our team before purchasing.

Read more less

Service Monitor Cable Adapter for BKR Series Radios The BK Technologies BKR0608A is a side port interface test and service adapter designed for use with Viavi/Aeroflex 3920 Service Monitors for BKR Series Portables. This specialized adapter enables reliable testing, diagnostics, and performance evaluation of BKR5000 series radios and allows technicians to expand their service tasks to Viavi/Aeroflex 3920 Service Monitors. Built for professional service environments, it provides a direct link to streamline radio maintenance and ensure optimal performance. BKR0608A Key Features: Compatible with Viavi/Aeroflex 3920 Service Monitors Designed for BKR5000 Series radios Ideal for service technicians and field radio diagnostics Enhances precision during maintenance and calibration BK Technologies BKR0608 Compatibility: BKR5000 Series BKR9000 Series Warranty: 1-year manufacturer’s warranty

Read more less

Shoulder Microphone for DTR Series - Weather Resistant The Motorola HKLN4687 is an external speaker microphone designed to clip onto your lapel, providing convenient communication. This weather-resistant shoulder microphone works exclusively with Motorola DTR600 and DTR700 series two-way radios. Key Features Shoulder Mount Design: Attaches conveniently to your lapel for easy access without holding the radio. External Speaker Microphone: Combines speaker and microphone into one unit for clear audio. Weather Resistant: Designed to withstand various weather conditions, ensuring reliable performance outdoors. PTT Clip: Features a PTT (Push-to-Talk) button on the clip for quick and easy communication. Compatibility DTR600 DTR700 Benefits Hands-Free Communication: Lets you communicate easily while keeping your hands free. Clear Audio: Delivers clear sound and voice pickup for effective communication. Durable in Outdoors: Weather-resistant design ensures reliable performance in various conditions. Warranty 1-year manufacturer's warranty

Read more less

Professional Back-End Test Cable for Commercial Mobile Radios Ensure Precise System Diagnostic Mapping Maintain optimal alignment and peak RF performance across your fleet infrastructure with a dedicated rear-port diagnostic link. The Motorola PMKN4150A Back-End Application Test Cable is a genuine original equipment manufacturer (OEM) diagnostic component designed for advanced service, alignment, and tuning configurations. Engineered to interface directly with the rear accessory port of professional transceivers, the Motorola PMKN4150A establishes a secure, shielded pathway between the radio chassis and specialized communication service monitors. This high-grade test cable minimizes signal attenuation during comprehensive diagnostic sweeps, ensuring that technicians obtain flawless readings when verifying transmitter frequencies and receiver sensitivity metrics. The Motorola PMKN4150A is the updated version of the Motorola PMKN4150. Developed for radio service technicians, system engineers, and enterprise fleet maintenance facilities, the Motorola PMKN4150A resolves the complexity of benchmarking infrastructure equipment. Instead of relying on frontline user interfaces, the Motorola PMKN4150A hooks into backend telemetry lanes to allow comprehensive bench testing without dismantling the main radio assembly. Before conducting system diagnostics, technical personnel must ensure their service shop is equipped with compatible automated radio test sets or manual modulation analyzers calibrated for exact manufacturer specifications. Key Features & Benefits Rear Accessory Port Optimization: Engineered explicitly to hook into the backend multi-pin interface matrix without loose pins or data packet degradation. High-Shielding Cable Design: Fabricated with premium internal insulation to isolate ambient RF noise and provide highly accurate diagnostic measurements. Streamlined Bench Testing: Enables rapid service monitoring and automated alignment procedures without requiring technicians to manipulate frontend control heads. Heavy-Duty Terminal Connectors: Built with industrial-grade interface plugs that resist physical terminal wear across hundreds of insertion cycles. OEM Precision Calibration: The Motorola PMKN4150A satisfies exact factory testing profiles to prevent diagnostic hardware mismatches or electrical shorts during tuning. Specifications Attribute Details Brand Motorola Model/SKU Motorola PMKN4150A Product Type Back-End Test Cable Application Diagnostic and Alignment Testing Port Interface Rear Accessory Connector Cable Type Multi-Conductor Shielded Color Black Compatibility ArubaMobile CM200d DM1400 DM1600 Tahiti XiRM3188 Recommended Accessories Motorola CM200d Mobile Two-Way Radio (CM200d) — A primary mobile transceiver platform equipped with a compatible rear pin matrix that hosts this service tool. Frequently Asked Questions Does this cable support front-panel microphone port programming? No. The Motorola PMKN4150A is designed exclusively as a back-end test cable that interfaces with the rear accessory connector block. It cannot be plugged into front-facing microphone ports or standard programming inputs. Is specialized alignment software required to use this hardware? Yes. While the Motorola PMKN4150A provides the physical electronic connection between the radio and your bench test instruments, executing actual internal calibration adjustments requires the official factory alignment software application. Can this test cable be left permanently inside a vehicle setup? No. This is a specialized service shop tool intended strictly for bench testing, tuning, and system diagnostics. Leaving the Motorola PMKN4150A connected during regular field operations can expose the backend ports to accidental electrical shorts or physical damage.   Warranty 1-year manufacturer's warranty.

Read more less

Corrosion-Resistant Chrome Magnetic NMO Mount for Mobile Antennas Ensure a secure, non-permanent mobile antenna setup with this durable chrome-plated magnetic NMO mounting system. The PCTEL GM-NC is a professional-grade magnetic NMO (New Motorola) mount designed for the rapid installation of mobile antennas on any flat metallic vehicle surface. This mount features a powerful magnetic base that provides exceptional pull strength, ensuring your antenna remains firmly in place during high-speed travel and high-vibration conditions. The high-polish chrome finish not only provides a sleek, professional aesthetic but also offers superior resistance to corrosion and environmental wear, making it ideal for long-term outdoor exposure on public safety and commercial vehicles. Equipped with 12 feet of high-quality RG-58A/U coaxial cable, the GM-NC provides sufficient length for clean routing from the vehicle roof or trunk to the radio chassis. To offer maximum installation flexibility, this mount is supplied without a connector (bare wire termination). This allows technicians to trim the cable to the exact required length and install the specific RF connector—such as a PL-259, BNC, or Mini-UHF—that matches their mobile radio hardware. Designed for standard 1-1/8" - 18 thread NMO antennas, the PCTEL GM-NC is a versatile and reliable foundation for any mobile communication system. Key Features & Benefits Durable Chrome Finish: Corrosion-resistant plating ensures longevity and maintains a professional appearance in harsh weather. High-Pull Magnetic Base: Provides a secure, tool-free attachment to vehicle surfaces, allowing for quick transfers between vehicles. Customizable Termination: Shipped with 12 feet of RG-58A/U cable and no connector, allowing for a precise and custom installation. NMO Standard Interface: Compatible with a vast range of professional mobile antennas using the industry-standard 1-1/8" - 18 thread. Non-Invasive Mounting: Ideal for temporary installations or leased vehicles where drilling permanent holes is not an option. Specifications Attribute Details Brand PCTEL Model/SKU GM-NC Product Type Magnetic NMO Mount Frequency Range 0–1000 MHz Cable Type RG-58A/U Cable Length 12 Feet Connector Type None (Stripped/Bare) Mounting Thread 1-1/8" - 18 (NMO) Color Chrome Compatibility NMO Antennas Mobile Radios PL-259 Connectors BNC Connectors Mini-UHF Connectors Recommended Accessories Hytera HM782 Digital Mobile Radio (HM782) — High-tier DMR mobile radio that pairs with this mount using a custom-installed connector. Icom IC-F5021 VHF Mobile Radio (F5021) — Rugged 50-watt analog mobile radio compatible with this NMO mounting system. Motorola PMLN5072A Bracket — Universal mobile mounting bracket for securing radios during vehicle installation. Frequently Asked Questions Does this mount come with an antenna connector? No. The PCTEL GM-NC is supplied with 12 feet of coaxial cable and no connector installed, allowing you to install the specific connector required for your radio. What size is the mounting thread? This is a standard NMO mount featuring a 1-1/8" - 18 thread, compatible with the majority of professional mobile antennas. Is this mount safe for high speeds? Yes. The PCTEL GM-NC features a high-strength magnetic base designed to keep antennas secure under standard vehicle operating speeds and high-vibration conditions.   Warranty 1-year manufacturer's warranty.

Read more less

Motorola HKVN4384 Secure and Streamline Operations with the Radio Authentication Disable License Key The Motorola HKVN4384 License Key allows administrators to disable radio authentication when needed, offering flexibility and control for MOTOTRBO systems. Ideal for environments requiring simplified setup or when authentication is not necessary. *Software key will be emailed within 48 business hours.  ALL SALES ARE FINAL. - REFUND POLICY Key Features Radio Authentication Disable: Deactivates authentication protocols for easier management. Flexible Configuration: Adapts to operational needs by allowing or disabling authentication. Streamlined Setup: Reduces complexity in large-scale deployments. Seamless Compatibility: Fully integrates with MOTOTRBO radios. Compatibility XPR5350e Ion R7 SL7550e XPR7550e XPR7580e XPR7350e XPR5550e Benefits Simplified Management: Allows quick adjustments for specific communication requirements. Efficient Operations: Saves time in scenarios where authentication is not critical. Customizable Control: Ensures the radio system meets the unique needs of the organization. Delivery Time 1 to 3 business days. MOTOROLA XPR3300e & XPR3500e Collection *Feature license not eligible for further discounts.

Read more less

Serial Pass-Through Connection Cable for Icom Gateways Extend your serial communication reach by linking peripheral data hardware directly to your network gateway. The Icom OPC2389 is a commercial-grade serial connection cable designed specifically to bridge external RS-232 communication hardware with advanced Icom network gateways. Measuring an optimal 5 meters (16.4 feet) in length, this factory-original cable allows technicians to establish stable, low-latency data loops between localized hardware and network servers. It serves as the physical pipeline required to utilize advanced networking telemetry over specialized radio infrastructure. This high-shielded cable is explicitly engineered to interface with the Icom VE-PG3 and VE-PG4 RoIP (Radio over IP) network gateways. By utilizing the Icom OPC2389, operators can fully implement the gateway's Serial Pass-Through function, enabling a distant controller PC running virtual serial port software to access, monitor, and command the connected serial peripheral across an IP network. Built with high-grade molding and commercial shielding, the cable protects sensitive data streams from the heavy RF interference commonly found around high-power base stations and server racks. Key Features & Benefits Serial Pass-Through Support: Enables the remote management of RS-232 devices over IP infrastructure via a connected gateway. Generous 5-Meter Length: Provides 16.4 feet of high-grade cable routing flexibility inside server closets or command centers. Genuine OEM Construction: Factory-original Icom accessory ensures reliable pins, optimal impedance, and complete electrical compatibility. RF Interference Shielding: Heavy-duty outer jacket protects data packages from electromagnetic distortion near active transmitters. Secure Connector Layout: Built with precise locking hardware to maintain consistent contact under high-vibration deployment environments. Specifications Attribute Details Brand Icom Model/SKU OPC2389 Product Type Serial Connection Cable Protocol RS-232 Length 5 Meters (16.4 Feet) Color Black Compatibility VEPG4 VEPG3 Frequently Asked Questions What is the primary purpose of the Icom OPC2389 cable? The OPC2389 is used to connect an RS-232 serial communication device to an Icom VE-PG3 or VE-PG4 gateway to support remote data pass-through. Is this a standard USB to serial adapter cable? No. This is a specialized system cable built with proprietary pin assignments designed to plug directly into the dedicated option ports of Icom network gateways. Do I need to power off my equipment before installing this cable? Yes. Always turn off the gateway and the target serial device completely before connecting or disconnecting the data cable to avoid component damage.   Warranty 1-year manufacturer's warranty.

Read more less

Intrinsically Safe Cold-Weather Power for APX N70 Series Deploy with confidence in hazardous locations using this TIA4950 certified 3650mAh IMPRES 2 battery. The Motorola PMNN4818A is a high-performance IMPRES 2 Lithium-Ion battery specifically engineered for the APX N70 and APX N70XE portable radios. This battery is TIA4950 certified as intrinsically safe, making it a critical requirement for users operating in environments where flammable gases, vapors, or combustible dust may be present. With a substantial 3650mAh capacity, the PMNN4818A provides the extended duty cycles necessary for long shifts, ensuring your communication remains uninterrupted during mission-critical tasks in dangerous conditions. The Motorola PMNN4818A is the updated version of the Motorola PMNN4818. Equipped with Motorola’s advanced IMPRES 2 technology, the PMNN4818A features a self-calibration capability that manages battery health automatically. When maintained with IMPRES 2 chargers, the battery eliminates the need for manual monthly reconditioning, saving hours of downtime and extending the overall life of the power cell. The rugged IP68-rated housing is submersible in up to 2 meters of water for 4 hours and is optimized for extreme cold-weather operations, supporting reliable radio performance in temperatures as low as -30°C. Key Features & Benefits TIA4950 Intrinsically Safe: Certified for use in hazardous environments where explosive gases or dust are a constant risk. IMPRES 2 Smart Technology: Features automated self-calibration and maintenance to maximize life cycles and operational readiness. Extreme Cold Operation: The Motorola PMNN4818A is engineered to maintain full power delivery in freezing conditions down to -30°C. IP68 Submersible Rating: Ruggedized, dust-tight, and waterproof construction protects the battery during total submersion. High-Density 3650mAh Cell: Balanced design provides a high-capacity power solution while maintaining a manageable profile for the APX N70 series. Specifications Attribute Details Brand Motorola Model/SKU PMNN4818A Product Type IMPRES 2 Li-Ion Battery Voltage 7.4V Battery Chemistry Lithium-Ion (Li-Ion) Capacity 3650 mAh IP Rating IP68 (Submersible) Intrinsic Safety TIA4950 Certified Operating Temp -30°C to +60°C Weight 0.57 lbs (260g) Color Black Compatibility APX N70 APX N70XE Recommended Accessories Motorola IMPRES 2 Single-Unit Fast Charger (PMPN4604) — Required for automated self-calibration and optimal battery health. Motorola Heavy-Duty Spring Belt Clip (PMLN7008) — Rugged 2.5-inch clip for secure radio mounting. Motorola XVP730 Remote Speaker Microphone (PMMN4142A) — Mission-critical noise-canceling RSM compatible with APX N70 series. More Resources Manufacturer Data Sheet Accessories Catalog Battery Care Guide Atlantic Radio Blog Frequently Asked Questions Is the Motorola PMNN4818A battery intrinsically safe? Yes. This battery is TIA4950 certified for use in hazardous locations when used with a compatible intrinsically safe APX N70 or N70XE radio. Do I need to recondition this battery every month? No. When used with an IMPRES 2 charger, the self-calibration feature manages the battery’s health automatically, removing the need for manual reconditioning cycles. Can I use this battery with an APX N50 radio? No. The PMNN4818A is specifically designed for the APX N70 and N70XE series and is not compatible with the APX N30 or N50 series radios.   Warranty 2-year manufacturer's warranty.

Read more less

High-Capacity Cold-Weather Power for APX N70 Series Radios Power your mission-critical communications with this rugged 4400mAh IMPRES 2 battery designed for extreme environments. The Motorola PMNN4817A is a high-capacity IMPRES 2 Lithium-Ion battery engineered specifically for the high-tier APX N70 and APX N70XE portable radios. Delivering a powerful 4400mAh capacity, this battery ensures extended talk-time for long shifts and intensive field operations. Featuring Motorola’s advanced IMPRES 2 technology, the PMNN4817A automates battery maintenance and self-calibration, eliminating the need for manual monthly reconditioning cycles. This intelligent power management system maximizes battery life and ensures your fleet is always ready for immediate deployment. The Motorola PMNN4817 is the updated version of the Motorola PMNN4817. Built to withstand the most punishing industrial and public safety conditions, the Motorola PMNN4817A features an IP68 ruggedized housing that is fully submersible in up to 2 meters of water for 4 hours. It is optimized for extreme climate performance, supporting reliable radio operation in temperatures as low as -30°C. Whether navigating freezing winter patrols or heavy rain, this genuine Motorola battery provides the durability and high-density power required for mission-critical APX N70 series radios. Key Features & Benefits Extended 4400mAh Capacity: High-density power cell provides the maximum talk-time required for long work shifts and multi-day incidents. IMPRES 2 Smart Technology: Features an automated self-calibration system that eliminates the need for long hours of manual battery reconditioning. Extreme Cold Operation: The Motorola PMNN4817A is engineered to maintain reliable radio performance in temperatures as low as -30°C (-22°F). IP68 Submersible Rating: Dust-tight and waterproof construction protects the battery during total submersion in up to 2 meters of water for 4 hours. Optimized Life Cycle: IMPRES 2 batteries deliver up to 60% more charging cycles than standard Li-Ion batteries when used with IMPRES 2 chargers. Specifications Attribute Details Brand Motorola Model/SKU PMNN4817A Product Type IMPRES 2 Li-Ion Battery Voltage 7.4V Battery Chemistry Lithium-Ion (Li-Ion) Capacity 4400 mAh IP Rating IP68 (Submersible) Operating Temp -30°C to +60°C Weight 0.44 lbs (200g) Dimensions 83.0 x 49.0 x 27.0 mm Color Black Compatibility APXN70 APXN70XE Recommended Accessories Motorola IMPRES 2 Single-Unit Fast Charger (PMPN4604A) — Required for automated self-calibration and optimal battery health. Motorola Heavy-Duty Spring Belt Clip (PMLN7008A) — Rugged 2.5-inch clip for secure radio mounting. Frequently Asked Questions Do I need to manually recondition the Motorola PMNN4817A battery? No. When used with an IMPRES 2 single or multi-unit charger, the battery utilizes a self-calibration feature that manages maintenance automatically, so you do not need to perform monthly reconditioning cycles. Can this battery be used in freezing temperatures? Yes. The PMNN4817A is specifically designed for cold-weather operations and supports reliable radio performance down to -30°C. Is the Motorola PMNN4817A intrinsically safe for hazardous locations? No. This specific model is not UL-rated for TIA4950 intrinsically safe environments. For hazardous locations, please refer to the Motorola TIA4950 certified battery models.   Warranty The PMNN4817A is backed by a 48-month workmanship warranty and a 24-month capacity warranty (warranted to maintain 80% capacity) when charged exclusively in IMPRES 2 chargers.

Read more less

Tactical Hands-Free Communication with Sub-PTT Control The Icom HM238MC is a specialized tie-clip microphone designed for professionals who require discreet yet highly functional communication control. This rugged microphone is equipped with a unique Dual PTT (Push-to-Talk) system, featuring a main button and a secondary "Sub PTT" button. This configuration is specifically engineered for multi-channel or dual-band operations, allowing users to switch between communication groups instantly without adjusting their radio. With a 1000 mm (39.4 in) cable length, it provides ample slack for routing through uniforms or tactical vests. Built for reliability in active environments, the HM238MC features a 14-pin spring-type connector that ensures a secure, vibration-resistant link to your portable radio. It includes an integrated 2.5mm earpiece jack, allowing users to add a listen-only earpiece for private reception in noise-sensitive or high-decibel settings. Rated at IP54 for dust and water resistance (excluding the earpiece jack), this tie-clip microphone is a durable solution for security teams, dispatchers, and industrial personnel using Icom’s latest IP and digital hybrid platforms. Key Features & Benefits Dual PTT Buttons: Features both a main PTT and a Sub PTT button for effortless management of dual-channel or multi-group transmissions. Integrated 2.5mm Jack: Equipped with a 2.5φ earphone jack for easy connection of private listen-only accessories. Discreet Tie-Clip Design: Low-profile microphone clips securely to lapels or pockets, keeping your hands free while maintaining clear voice pickup. Rugged 14-Pin Connector: Utilizes a heavy-duty spring-type 14-pin interface for maximum connectivity and durability. IP54 Weather Resistance: Built to withstand dust ingress and splashing water, making it suitable for outdoor use in varied weather conditions. Extended Cable Reach: The 1-meter cable provides the flexibility needed for professional routing and comfortable movement during long shifts. Specifications Feature Specification Connector Type 14 Pin Spring Type Earpiece Jack 2.5 mm (2.5φ) Cable Length 1000 mm (39.4 in) IP Rating IP54 (Microphone Body) Weight 50 g (1.8 oz) Buttons Main PTT + Sub PTT Warranty 1 Year Manufacturer's Warranty Compatibility IPM60 IP730D IP740D Recommended Accessories Icom IP Hybrid Digital/LTE Radio (IP730D) Icom Heavy Duty Belt Clip (MBB-3) Frequently Asked Questions What is the purpose of the Sub PTT button? The Sub PTT allows you to transmit on a secondary channel or talkgroup (such as an LTE talkgroup on the IP730D) without having to toggle switches on the radio itself. Is the entire unit waterproof? The microphone body is rated IP54, which protects against dust and water splashes. However, the 2.5mm earphone jack is not waterproof, so care should be taken in heavy rain. Can I use any earpiece with this? You can use any standard listen-only earpiece that features a 2.5mm (2.5φ) single-pin plug. Warranty 1-year manufacturer's warranty.

Read more less

Seamless 900 MHz Integration for Curve, DLR, and DTR Series The Motorola CB900D Series is a versatile digital communication solution designed to bridge the gap between stationary service points and mobile personnel. Operating on the license-free 900 MHz ISM band, this device seamlessly integrates with your existing Motorola Curve, DLR, and DTR series radio fleets. This listing offers two distinct configurations to meet your installation needs: a Desktop Base Station package featuring a dedicated power supply for continuous use, and a Digital Call Box package optimized for battery-powered or custom-wired deployments. Built to withstand demanding environments, the CB900D features an IP54 weather-proof rating and tamper-proof locking plates. It offers highly customizable voice messages to provide clear, actionable directives to your team without the need for disruptive overhead paging. Whether used by personnel or a customer seeking assistance, a simple button press ensures an instant, discreet alert to your team, enabling immediate action across retail, hospitality, and distribution facilities. Available Variants Desktop Base Station (CB900-D-DE): Includes the PKG-1902-928 MHz digital unit and a USB Wall Charger for non-stop, direct-power operation. Digital Call Box (CB900-D-CB): Includes the PKG-1902-928 MHz digital unit only. This version is ideal for battery-powered wireless placement (Wall Charger Sold Separately). Key Features & Benefits Universal 900 MHz Compatibility: Works out of the box with Motorola Curve, DLR1020, DLR1060, DTR600, and DTR700 digital radios. Multi-Mode Functionality: Easily configured as a One-Way Call Box, Two-Way Call Box, or a Desktop Base Station. Customizable Voice Messages: Supports tailored audio alerts to provide specific location or task information to radio users. Rugged IP54 Design: Water and dust resistant, ensuring reliable performance in outdoor docking areas or high-traffic retail floors. Long-Life Battery Performance: Engineered for up to 1-year of battery life for wireless installations. Security & Customization: Features tamper-proof front plate locks and support for custom graphic paper signage. Specifications Feature Specification Frequency Range 900 MHz ISM Band (Digital) IP Rating IP54 (Dust and Water Resistant) Operating Modes One Way, Two Way, Base Station Security Tamper Proof Front Plate Locks Battery Life Up to 1 Year Warranty 1-Year Manufacturer's Warranty Compatibility Curve DLR1020 DLR1060 DTR600 DTR700 DTR410 DTR550 Frequently Asked Questions Which variant should I choose? If you plan to plug the device into a wall outlet for constant power, choose the CB900-D-DE. If you need to mount it wirelessly where power isn't available, choose the CB900-D-CB. Does this require an FCC license to operate? No. The CB900D operates on the 900 MHz ISM band, which is license-free for business use in the United States and Canada. Can I use this for two-way communication? Yes. The CB900D can be configured by administrators to operate in either one-way alert mode or two-way voice communication mode. More Resources CB900D Brochure CB900D Data Sheet   Warranty 1-year manufacturer's warranty.

Read more less

Motorola PMKN4163A USB Programming Cable Specialized interface for programming mobile microphones equipped with integrated Bluetooth® gateways. The Motorola PMKN4163A is a high-quality USB programming cable designed to provide a reliable data interface between a PC and specialized MOTOTRBO mobile accessories. This cable is specifically engineered for programming mobile microphones equipped with integrated Bluetooth® gateways. By establishing a stable wired connection, the PMKN4163A allows fleet managers and technicians to configure accessory settings, update firmware, and manage Bluetooth pairing parameters, ensuring your mobile communication suite operates at peak performance. The PMKN4163A is the updated version of the PMKN4163. As a genuine Motorola Solutions accessory, this cable ensures error-free data transfer, which is critical during firmware flashes or complex configuration changes. Its ruggedized connectors and shielded cabling are built to withstand the repetitive use typical of a professional radio service shop. Key Features & Benefits Targeted Accessory Support: Specifically designed for programming and updating mobile microphones with Bluetooth gateway technology. Direct USB Connectivity: Features a standard USB interface for easy connection to modern laptops and desktop computers without the need for serial adapters. Stable Firmware Updates: Provides a secure, wired data path essential for safe firmware upgrades, preventing data corruption during the update process. Plug-and-Play Reliability: Manufactured to exact OEM standards for instant recognition by Motorola Customer Programming Software (CPS). Industrial Grade Durability: Built with heavy-duty strain relief and high-quality shielding to resist interference and physical wear. Essential Fleet Tool: Allows for the customization of Bluetooth settings to ensure secure and efficient pairing between mobile radios and wireless accessories. Specifications Attribute Details Brand Motorola Solutions Model / SKU PMKN4163A (Replaces PMKN4163) Product Type USB Programming Cable Interface USB to Mobile Accessory Connector Application Bluetooth Gateway Microphone Programming Connection Type Wired (USB) Cable Type Shielded Data Cable Compatibility This cable is specifically engineered for programming mobile microphones equipped with integrated Bluetooth® gateways. Recommended Accessories Motorola PMMN4097C Mobile Microphone with Bluetooth Gateway — Compatible Bluetooth gateway mobile microphone programmable with the PMKN4163A. Motorola NNTN8127B Operations-Critical Wireless PTT Pod — Compatible wireless PTT pod for use with Bluetooth gateway accessories. Motorola Mobile Radio High-Power Bluetooth Mic (PMMN4095) Motorola PMKN4143A MOTOTRBO Remote Mount Cable (3M) — Remote mount extension cable for MOTOTRBO mobile installations. Frequently Asked Questions Does this cable plug into the front of the radio? No. The PMKN4163A is designed to plug directly into the compatible mobile microphone/accessory itself to manage its internal Bluetooth gateway settings, rather than programming the radio’s frequency data. Is software included with this cable? No. To utilize this cable, you must have the appropriate Motorola Customer Programming Software (CPS) or Accessory Programming Software installed on your computer. Can I use this for standard mobile radio programming? No. This cable is specifically for Bluetooth gateway accessories. For standard radio programming via the front mic port, you would typically use a cable like the PMKN4147. Warranty 1-year manufacturer’s warranty.

Read more less

C-Style Earpiece with In-line PTT and Mic Hytera ACN01 and EH01 The Hytera EHN16 is a lightweight, C-style earpiece designed for discreet and reliable communication. This accessory includes an in-line Push-to-Talk (PTT) button and microphone, providing convenient hands-free operation for your compatible Hytera portable radios. Its black color and discreet design make it ideal for professionals who need clear audio without drawing attention. Boasting an IP54 rating for protection against dust and splashing water, the Hytera EHN16 is built for comfort and durability during extended wear in various demanding environments. With a sensitive microphone and powerful speaker, this earpiece ensures crisp audio for both transmission and reception, guaranteeing reliable communication. Key Features C-Style Earpiece: Provides a comfortable and discreet fit for extended wear. EH-01 In-line PTT and Microphone: Allows for convenient push-to-talk functionality and clear voice pickup, enabling hands-free operation. 16-Pin Connector: Ensures a secure and stable connection to compatible Hytera radios. ACN-01 IP54 Rated: Offers protection against dust ingress and splashing water, enhancing durability in various environments. Lightweight Design: Weighs about 50g, minimizing user fatigue during long periods of use. High Microphone Sensitivity: Features –45±3 dB sensitivity for crisp and clear outgoing audio. Clear Speaker Output: Delivers clear audio with 10 mW rated power and 20 mW maximum power. Wide Operating Temperature: Functions reliably in temperatures from –20℃ to 60℃. Compatibility PD702i PD752i PD782i PD792i-Ex PD982i PT560H PT580HPLUS PD705 PD705G PD755 PD755G PD785 PD785G PD985 Benefits Discreet Communication: The C-style earpiece allows for private listening without attracting undue attention. Hands-Free Operation: The in-line PTT and microphone free up your hands, improving efficiency and safety during tasks. Reliable Performance: IP54 rating ensures the earpiece performs consistently even when exposed to dust and splashes. Enhanced Audio Clarity: Delivers clear incoming and outgoing audio, crucial for effective communication in diverse settings. Comfortable Extended Wear: Lightweight and ergonomically designed for comfort during long shifts. Durable and Long-Lasting: Built to withstand daily professional use, providing extended lifespan.   Warranty 1-year manufacturer's warranty

Read more less

Icom OPC2500 EXTENSION CABLE FOR HANDS FREE MICROPHONE  The Icom OPC2500 is an extension cable for the HM249. This cable fits between the main PTT button and the microphone/remote PTT button.  The cable length is 2m long. OPC2500 COMPATIBLY RADIOS: 2730A ID5100A F5011 F5021 F5023H F5121D F5122DD F5123D F6123D F5130D F6011 F6021 F6121D F6130D IP501H  

Read more less

Motorola PMMN4067B ATEX IMPRES Remote Speaker Microphone Intrinsically safe RSM with IMPRES audio, windporting, and emergency button. ATEX/IECEx/CSA certified for Zone 1 and Zone 2 hazardous environments. IP64 rated. Updated version of the PMMN4067A and PMMN4067. The Motorola PMMN4067B is a high-performance, intrinsically safe remote speaker microphone designed for the world’s most demanding and volatile environments. Fully ATEX/IECEx and CSA certified, it operates safely in areas where flammable gases or combustible dust are present. Motorola’s IMPRES technology automatically suppresses background noise and amplifies quiet transmissions, ensuring mission-critical voice commands are heard clearly even in the presence of heavy industrial machinery or emergency sirens. Advanced Windporting technology eliminates howling and whining caused by high winds and prevents water from clogging the microphone element — ensuring consistent performance in torrential rain. A dedicated volume control toggle and highly visible orange emergency button provide instant access to critical radio functions even while wearing heavy protective gloves. Ideal for oil and gas, chemical processing, and fire rescue teams. The PMMN4067B is the updated version of the PMMN4067A and PMMN4067. Key Features & Benefits ATEX/IECEx/CSA Intrinsically Safe: Certified for Zone 1 and Zone 2 hazardous environments where explosive atmospheres may exist. IMPRES Smart Audio: Automatically optimizes audio levels and suppresses ambient noise for superior voice intelligibility. Windporting Technology: Provides clear communication in high-wind conditions and prevents water-clogging during heavy rain. Orange Emergency Button: Large, easy-to-access button allows users to signal distress and request immediate assistance in seconds. Dedicated Volume Control: Side-mounted toggle for rapid adjustment of incoming transmission levels without reaching for the radio. IP64 Rated: Dust-tight and splash-resistant construction for reliable operation in harsh industrial and outdoor settings. Fully Sealed — No Audio Jack: Maintains strict ATEX and IP64 safety ratings; no earpiece connection port. Specifications Attribute Details Brand Motorola Solutions Model / SKU PMMN4067B Replaces PMMN4067A, PMMN4067 Product Type Remote Speaker Microphone (RSM) Safety Certification ATEX / IECEx / CSA (Zone 1 & Zone 2) Ingress Protection IP64 (Dust-Tight & Splash Resistant) Audio Technology IMPRES™ Microphone Type Windporting Audio Jack None (Fully Sealed) Controls PTT, Volume Toggle, Emergency Button Country of Origin Malaysia Compatibility Model Series DP4401EX, DP4801EX, DP4000 EX Series Motorola DP4000 EX Series (ATEX) DGP8550EX Motorola DGP Series (ATEX) MTP8500EX, MTP8550EX Motorola MTP Series (ATEX) XIR-P8608EX, XIR-P8668EX, XIR-P8600 EX Series Motorola XIR P8000 EX Series (ATEX) XPR6580IS Motorola XPR6000 IS Series XPR7350e, XPR7550e Motorola XPR7000e Series What’s Included Description SKU/Model Status ATEX IMPRES Remote Speaker Microphone PMMN4067B Included Swivel Clothing Clip Integrated Included Heavy-Duty Coiled Cord Integrated Included ATEX Safety Leaflet — Included Recommended Accessories Motorola NNTN8359C ATEX IMPRES Li-Ion Battery (2075 mAh) – Intrinsically safe ATEX/IECEx certified replacement battery for DP4401EX and DP4801EX radios. Motorola PMLN6086A ATEX 2.5-Inch Belt Clip – Replacement belt clip for DP4401EX and DP4801EX ATEX radios. Motorola PMLN6085 ATEX Leather Carry Case – Protective carry case for ATEX-rated portable radios. Frequently Asked Questions Can I use an earpiece with this microphone? No. The PMMN4067B is a fully sealed unit with no audio jack, maintaining its strict ATEX and IP64 safety ratings for hazardous zones. What is Windporting? Windporting is a specialized housing design that prevents wind from creating turbulence over the microphone element, ensuring your voice is heard clearly even in high-wind conditions. It also prevents water from clogging the microphone during heavy rain. Does this require a software update for my radio? As an IMPRES accessory, the PMMN4067B is plug-and-play. However, keeping your radio firmware up to date is recommended to utilize the latest IMPRES audio optimization features. Warranty 1-year manufacturer’s warranty.

Read more less

Hytera HYT-5111000000621A SM07 Mobile Microphone Holder Genuine OEM nickel-coated SUS304 stainless steel SM07 microphone hanging clip for Hytera MD and HM series mobile radios. The Hytera HYT-5111000000621A is a genuine OEM SM07-style mobile microphone hanging clip fabricated from 1.2mm SUS304 stainless steel with a nickel-coated finish. It provides a secure, corrosion-resistant docking point for Hytera mobile palm microphones in vehicle cabins and dispatch centers. Mounting requires three HYT-5107000000495A self-tapping screws (sold separately). Key Features & Benefits SUS304 Stainless Steel Construction: 1.2mm stainless steel for superior structural integrity and long-term durability. Nickel-Coated Finish: Extra layer of protection against moisture and wear. SM07 Holder Standard: Designed to accommodate the round-button style hanger found on Hytera mobile palm microphones. Screws Sold Separately: Requires three HYT-5107000000495A self-tapping screws for a complete, secure installation. RoHS Compliant: Manufactured to strict environmental standards, free from hazardous substances. Genuine Hytera OEM Part: Ensures 100% mechanical compatibility with supported mobile radio microphones. Specifications Attribute Details Brand Hytera Model / SKU HYT-5111000000621A Product Type SM07 Mobile Microphone Holder Material SUS304 Stainless Steel Thickness 1.2 mm Finish Nickel Coated Required Screws 3 × HYT-5107000000495A (sold separately) Compliance RoHS Compatibility Model Series MD612i, MD622i, MD652i, MD782i Hytera MD Series Mobile Radios HM782 Hytera HM Series Mobile Radios Recommended Accessories Compatible Radios Hytera HM782 H-Series Professional DMR Mobile Two-Way Radio — Compatible HM series mobile radio. Hytera MD622i Mobile Two-Way Radio VHF — Compatible MD series mobile radio. Frequently Asked Questions Does this clip come with the screws? No. The HYT-5111000000621A is the metal holder only. Three HYT-5107000000495A self-tapping screws must be purchased separately to complete the installation. Is this clip compatible with other radio brands? It is specifically designed for the round-button hanger on Hytera mobile microphones, but may fit other brands that use a similar round-button hanging mechanism. What tools are needed for installation? You will typically need a drill for pilot holes and a Phillips (cross-recessed) screwdriver to drive the required truss-head screws. Warranty 1-year manufacturer’s warranty.

Read more less

High-Speed Data Cloning for Professional Fleet Management The Icom OPC2362 is a professional-grade zone copy cable engineered for direct cloning between 14-pin Icom handheld portables and 10-pin DIN mobile units. Measuring 800 mm in length, this cable provides a secure and reliable link for technicians to synchronize critical data without the need for a secondary PC interface. By facilitating the instant copying of zone information, the OPC2362 streamlines the programming process, ensuring that mobile units in a vehicle fleet perfectly match the configuration of the handheld portables used in the field. Constructed with a robust build quality, this cable is specifically tailored for on-site use where speed and reliability are paramount. Whether you are deploying a new P25 digital system or updating existing IDAS™ parameters, the Icom OPC2362 eliminates the manual entry of channel data, reducing the risk of human error and significantly cutting down deployment time. Its heavy-duty shielding ensures that data transfer remains stable and free from interference, even in demanding professional environments. Key Features & Benefits Direct Zone Copying: Facilitates the seamless transfer of zone information between different radio form factors. Handheld to Mobile Interface: Specifically designed to bridge 14-pin Icom portables with 10-pin DIN mobile accessory ports. 800 mm Cable Length: Provides optimal reach for convenient bench-top or in-vehicle cloning operations. On-Site Reliability: Robust build quality ensures consistent performance for professional technicians during field updates. Efficiency Boost: Streamlines the programming workflow by enabling rapid fleet synchronization without a laptop. Genuine Icom Engineering: Tailored specifically for modern F-series P25 and IDAS™ digital radios to ensure 100% data integrity. Specifications Feature Specification Product Type Zone Copy / Cloning Cable Interface Handheld to Mobile Length 800 mm Connectors 14 Pin to 10 Pin DIN Color Black Warranty 1-Year Manufacturer's Warranty Compatibility F7010 F7020 F7040 F5400D F6400D F7510 F7520 F7540 Recommended Accessories Icom P25 Portable Radio (F7010) Icom IDAS Mobile Radio (F5400D) Icom PC Programming Cable (OPC2363) Icom Mobile Speaker Microphone (HM220) Frequently Asked Questions What is the advantage of an 800 mm cable? The 800 mm (approx. 31 inches) length provides enough slack to comfortably connect a portable radio to a vehicle-mounted mobile radio or to perform cloning on a service bench without cable tension. Does this cable copy firmware versions? No. This cable is for cloning "Zone" and user configuration data. Firmware updates must be performed individually using a PC and the appropriate programming software. Is this compatible with 9-pin mobile accessory ports? No. This cable is specifically engineered for modern 10-pin DIN mobile accessory connectors found on the F5400D/F7500 series.   Warranty 1-year manufacturer's warranty.

Read more less

Versatile System Integration for Icom Mobile Transceivers The Icom OPC2078 is a multi-function D-Sub 25-pin accessory cable designed to expand the operational capabilities of your mobile radio system. Measuring 360 mm in length, this cable serves as the primary interface for connecting Icom transceivers to a wide array of external hardware, including PCs, external speakers, and vehicle-specific controls. Whether you need to integrate an ignition sense line for automatic power management or a vehicle horn for external alerts, the OPC2078 provides the reliable, direct-wire connection required for professional mobile installations. This high-performance interface supports both signal inputs and outputs, facilitating AF output and modulation input for advanced communication setups. Additionally, the cable allows for the direct connection of third-party GPS receivers to compatible digital transceivers, enabling real-time location tracking. Engineered for durability and precision, the Icom OPC2078 is an essential component for public safety, transportation, and industrial fleets that require seamless integration between their radio equipment and vehicle electronics. Key Features & Benefits Comprehensive Signal Access: Provides inputs and outputs for several signals, including AF output and modulation input for external audio devices. GPS Integration Support: Allows for the direct connection of third-party GPS receivers to supported digital mobile models for fleet tracking. Vehicle System Control: Enables easy connection to ignition sense lines for power synchronization and vehicle horn/light relays for emergency alerts. External Channel Control: Facilitates remote channel switching and control through the radio's rear accessory port. Professional 360 mm Length: Offers a compact and manageable cable run for clean installations within dashboards or radio racks. Genuine Icom Accessory: Guaranteed mechanical and electrical compatibility with a wide range of F-series analog and digital mobile radios. Specifications Feature Specification Product Type Accessory Interface Cable Connector D Sub 25 Pin Length 360 mm Signal Support AF Out / Modulation In / Ignition / GPS Color Black / Multi Wire Warranty 1 Year Manufacturer's Warranty Compatibility F5330D F6330D F5220D F6220D F5121D F6121D F5122D F6122D F5123D F6123D F5130D F6136D F5021 F6021 F5022 F6022 F5023 F6023 F5026 F5026H F5011 F6011 F5012 F6012 F5013 F6013 F5013H F6013H Recommended Accessories Icom Digital Mobile Transceiver (F5130D) Icom External Communication Speaker (SP35) Frequently Asked Questions Can I use this for digital modulation on the F5121D series? No. For the IC-F5121D, F5122D, and F5123D series, this cable accepts analog input only. Digital modulation input is not supported on these specific models. Which models support GPS through this cable? GPS signals are accepted only with digital transceivers, specifically the IC-F5330D, F5130D, F5121D, F5122D, and F5123D series. What is the purpose of the ignition sense line? The ignition sense line allows the radio to automatically power on or off when the vehicle's ignition is turned, preventing battery drain when the vehicle is not in use. Warranty 1-year manufacturer's warranty.

Read more less

Wireless Connectivity for Hands-Free Operation The Icom UT133 is an internal Bluetooth unit designed to integrate wireless communication capabilities directly into your Icom transceiver. Once installed, this board allows for a seamless connection to Bluetooth headsets and accessories, providing operators with a hands-free experience that is essential for both driving safety and operational efficiency. The UT133 is specifically engineered for high-performance mobile units like the 5100A and 2730A, as well as the A120 aviation mobile radio. By eliminating the need for a physical microphone cable, the UT133 provides greater freedom of movement within the vehicle or cockpit. It supports advanced features such as Push-To-Talk (PTT) operation via compatible wireless headsets and, when used with the 5100A, enables wireless connection to Android devices for D-STAR data applications. As a genuine Icom internal component, the UT133 maintains the radio's electrical integrity and provides a stable, low-latency connection for professional-grade voice transmission. Key Features & Benefits Hands-Free Communication: Supports wireless headsets (such as the Icom VS-3) to ensure safer operation while driving or flying. Seamless Internal Integration: Mounts directly inside the radio chassis, preserving the clean look and external ports of your transceiver. Bluetooth® Ver. 3.0 Technology: Utilizes a reliable 2.4 GHz connection for stable audio pairing and data transfer. Remote Control App Support: Enables wireless connection between the 5100A and the RS-MS1A Android app for remote radio control and D-STAR messaging. Enhanced Aviation Safety: When installed in the A120, it allows pilots to maintain focus while utilizing wireless audio interfaces. Genuine Icom Accessory: Factory-certified board ensuring perfect synchronization with the radio’s firmware and audio processing. Specifications Feature Specification Bluetooth Version Bluetooth® Ver. 3.0 Frequency Range 2402 – 2480 MHz Power Supply Internal (Powered by Radio) Interface Internal Plug-in Board Supported Profiles HFP, HSP, SPP Warranty 1-Year Manufacturer's Warranty Compatibility 2730A 5100A A120 Frequently Asked Questions Can I install this board myself? Yes. The UT133 is designed as a user-installable plug-in board. Detailed instructions are included in the radio's manual, though professional installation is recommended if you are uncomfortable opening the radio chassis. Can I use any Bluetooth headset with this board? While the UT133 is designed to work with standard Bluetooth profiles, Icom officially recommends the VS-3 headset to ensure full functionality of the Push-To-Talk (PTT) button and audio quality. Does this board allow me to play music through the radio? No. The UT133 is optimized for two-way radio communication (voice) and data transfer. It is not designed for high-fidelity A2DP music streaming. Warranty 1-year manufacturer's warranty.

Read more less

Seamless Connectivity for PC and Android Integration The Icom OPC2350LU is a specialized USB data communication cable designed to bridge the gap between your Icom transceiver and modern digital devices. This high-quality interface allows for a direct connection between your radio and a PC or an Android™ device, unlocking advanced features like D-STAR data communication, remote control via apps, and simplified programming. Featuring a specialized L-type 2.5 mm plug, the OPC2350LU is engineered for a secure, low-profile fit that prevents accidental disconnection during field or mobile operations. Measuring 60 cm (23.6 in) in length, this cable provides the perfect reach for desktop setups or vehicle-mounted radios where your Android device is secured in a cradle nearby. Whether you are using the RS-MS1A Android application to send pictures and text messages over the D-STAR network with the 5100A, or interfacing with the 9700 for high-speed digital modes, this genuine Icom cable ensures stable, high-speed data transfer without the interference common in generic USB-to-serial adapters. Key Features & Benefits Android™ Device Compatibility: Enables full data communication between your radio and Android smartphones or tablets for advanced app integration. L-Type Precision Connector: The 2.5 mm L-type plug design reduces strain on the radio's data port and provides a more streamlined cable path. Digital Mode Support: Essential for D-STAR users looking to utilize picture sharing, text messaging, and GPS location services via the RS-MS1A app. Plug-and-Play PC Interface: Functions as a reliable interface for PC-based radio programming and remote control software. Compact and Portable: At 60 cm, it is easily stowed in a radio bag or glove box, making it ideal for Go-Kits and emergency communication (EmComm) use. Genuine Icom Reliability: Built to Icom’s exacting standards to provide shielded data protection and consistent connectivity across land and aviation platforms. Specifications Feature Specification Cable Type USB Data Communication Radio Connector L-Type 2.5 mm Plug Device Connector USB (Supports PC / Android) Cable Length 60 cm (23.6 in) Weight ~45 g Function Data Transfer / Programming / App Control Compatibility 9700 A220 7100 4100A 5100A 5100E 4100E What's Included Description SKU Status USB Data Cable OPC2350LU ✅ Included USB to Micro-USB Adapter — ✅ Included USB to USB-C Adapter — ✅ Included Portable / Mobile Radio 5100A ❌ Sold Separately Recommended Accessories Icom RS-MS1A (Android Remote Control App) Icom CS-5100 Programming Software Icom MBF-1 Suction Cup Mounting Base Icom MBA-2 Controller Bracket (for 5100) Icom BP-272 Li-Ion Battery (for handheld units) Frequently Asked Questions Does this cable work with iPhones or iPads? No. The OPC2350LU is designed specifically for use with PCs and Android™ devices. iOS devices are not supported for data communication via this cable. Do I need a separate driver for my PC? Yes. To use the OPC2350LU with a Windows PC, you must download and install the appropriate USB driver from the official Icom website to ensure the computer recognizes the radio's data port. Can I use this cable to charge my Android phone? No. This is a data communication cable designed for signal transfer between the radio and the device; it does not provide enough power to function as a mobile charger. Warranty 1-year manufacturer's warranty.

Read more less

Secure Installation for High-Performance Mobile Transceivers The Icom MBF4 is a rugged, professional-grade mounting bracket designed to provide a secure and stable foundation for your Icom mobile radio chassis. Engineered specifically for the main body of the 5100A and 2730A series, this heavy-gauge steel bracket allows for a clean and professional installation in a variety of vehicle types. Whether you are mounting your radio under a dashboard, against a floor console, or in a specialized radio rack, the MBF4 ensures your equipment remains firmly in place, protecting it from vibration and impact during transit. Designed as a "U-shaped" mobile bracket, the MBF4 provides ample clearance for heat dissipation, allowing the radio's cooling fans to operate efficiently even during high-power transmissions. Its adjustable design allows operators to tilt the radio chassis to the most convenient angle for cable management and accessibility. As a genuine Icom accessory, it features precision-aligned mounting holes that match the radio's side-chassis threads perfectly, preventing the stripping or misalignment common with universal third-party mounts. Key Features & Benefits Custom-Fit Security: Specifically designed for the chassis dimensions of the 5100 and 2730 series for a vibration-free fit. Heavy-Duty Construction: Manufactured from high-strength steel with a durable black powder-coated finish to resist rust and wear. Optimized Airflow: The elevated U-bracket design ensures the radio’s heat sink and fans have sufficient clearance for thermal management. Variable Angle Mounting: Allows for multi-angle positioning, making it easier to install the radio in cramped automotive environments. Professional Grade Reliability: Trusted by public safety and amateur radio operators for long-term durability in demanding mobile setups. Easy Installation: Includes the necessary hardware to attach the bracket to the radio body securely. Specifications Feature Specification Product Type Mobile Mounting Bracket (U-Shape) Material Steel Finish Black Powder Coat Application Main Body (Chassis) Mounting Weight ~350 g Warranty 1-Year Manufacturer's Warranty Compatibility 5100A 2730A 5100E 2730E What's Included Description SKU Status Mobile Mounting Bracket MBF4 ✅ Included Radio Mounting Screws — ✅ Included Main Radio Chassis 5100A ❌ Sold Separately Vehicle Mounting Hardware — ❌ Varies by Install Recommended Accessories Icom MBA-2 Magnetic Controller Bracket (for 5100) Icom MBA-5 Controller Bracket (for 2730) Icom OPC-2254 Separation Cable (20ft) Icom HM-207 Remote Control Microphone Icom SP-35 External Mobile Speaker Frequently Asked Questions Does this bracket hold the display head? No. The MBF4 is designed specifically to hold the main body (chassis) of the radio. To mount the detached control head, you will need the MBA-2 (for 5100) or MBA-5 (for 2730). Can I use this for an older Icom radio? While it is specifically marketed for the 5100 and 2730, it may fit other Icom mobile radios with similar chassis widths. However, we recommend checking your radio's manual to ensure the mounting hole pattern matches. Does this include the screws to bolt it to my car's floor? This kit includes the screws to attach the bracket to the radio. Because every vehicle is different, the self-tapping screws or bolts needed to secure the bracket to your vehicle's interior are typically provided by the installer or sold separately. Warranty 1-year manufacturer's warranty.

Read more less

Advanced Interface for ID-5100 and IC-2730 Series The Icom HM207 is a high-performance control microphone designed to provide comprehensive remote operation for Icom’s dual-band mobile transceivers. Engineered for ergonomic comfort and tactical efficiency, this microphone allows operators to manage critical radio functions directly from the palm of their hand. Featuring a dedicated Main/Sub button, the HM207 is optimized for dual-band monitoring, allowing users to toggle between frequencies instantly without needing to reach for the radio's front panel. Equipped with a rugged modular connector and a durable coiled cable that extends to over 22 inches, the Icom HM207 is built for the rigors of mobile installations. Whether you are navigating digital D-STAR networks on the ID-5100A or managing analog repeaters on the IC-2730A, this microphone delivers clear, high-fidelity audio and responsive control. As a genuine Icom accessory, it guarantees perfect electrical compatibility and the reliable performance expected by professional and amateur radio operators alike. Key Features & Benefits Full Remote Operation: Control essential radio functions directly from the microphone for safer and more convenient mobile use. Main/Sub Toggle: Specialized button allows for seamless switching between the Main and Sub bands on dual-band transceivers. Ergonomic Design: Contoured shape and tactile button placement reduce hand fatigue during extended periods of operation. Heavy-Duty Coiled Cable: Features a 580mm (22.8 in) curled length, providing ample reach for various vehicle mounting positions. Backlit Keypad: High-visibility buttons ensure accurate operation even in low-light or nighttime driving conditions. Genuine Icom Quality: Engineered to exact factory specifications to maintain the superior audio modulation and signal integrity of your Icom radio. Specifications Feature Specification Microphone Type Mobile Control Hand Mic Connector Modular (RJ-45 style) Cable Length 580 mm (22.8 in) Curled Weight 140 g (4.94 oz) Special Functions Main/Sub Band Switching Waterproof Rating N/A (Interior Use Only) Compatibility 5100A 2730A 5100E 2730E Recommended Accessories Icom 5100A Deluxe Dual-Band D-STAR Mobile Radio Icom 2730A Dual-Band Mobile Analog Transceiver Icom MBA5 Remote Controller Bracket Icom SP35 External Mobile Speaker Frequently Asked Questions Can I use this microphone with an older Icom mobile radio? The HM207 is specifically designed for the newer generation of Icom mobile radios like the ID-5100 and IC-2730. While it uses a modular connector, the internal wiring for the control buttons may not be compatible with legacy models. Does this microphone have a DTMF keypad? Yes, the HM207 features a full numeric keypad for entering frequencies directly or sending DTMF tones for repeater control and autopatch. Is the cable user-replaceable? The cable is integrated into the microphone housing to ensure maximum durability and moisture resistance. Replacement typically requires a new microphone unit or professional service. Warranty 1-year manufacturer's warranty.

Read more less

Motorola PMMN4008A Mag One Remote Speaker Microphone Compact Water-Resistant Audio Accessory for Professional Fleets The Motorola PMMN4008A is a lightweight and cost-effective remote speaker microphone designed for professionals who require consistent, hands-free communication. As part of the Mag One™ value line, the Motorola PMMN4008A allows users to transmit and receive messages without removing the radio from their belt. This reduces the risk of dropping the radio unit and minimizes wear on the radio's accessory port, making the Motorola PMMN4008A an essential addition for retail, hospitality, and light industrial teams. The Motorola PMMN4008A is the updated version of the Motorola PMMN4008. Engineered for reliable daily performance, the Motorola PMMN4008A features a high-quality coiled cord for flexible movement and a 360-degree rotating clothing clip for secure placement on a lapel or shoulder. This Motorola PMMN4008A is rated IP54 for dust and water resistance, ensuring it can withstand light rain and indoor environmental challenges. With its intuitive side-mounted Push-To-Talk button and clear audio output, it provides a seamless communication experience for high-traffic work environments. Key Features & Benefits Compact Ergonomic Housing: Designed to be smaller and lighter than standard microphones for reduced fatigue during long shifts. IP54 Weather Protection: Built to resist dust ingress and splashing water, suitable for both indoor and outdoor applications. M1 2-Pin Connector: Features the industry-standard Motorola 2-pin interface for broad compatibility across legacy and current portable series. 360-Degree Swivel Clip: Heavy-duty rotating clip allows for flexible mounting on collars, vests, or epaulets. High-Clarity Audio: Optimized speaker elements ensure incoming transmissions are heard clearly in moderately noisy environments. Rugged Coiled Cable: Reinforced stress relief and a flexible cord design allow for a full range of motion without snagging. Specifications Brand: Motorola Mag One™ Connector Type: M1 (Standard 2-Pin) IP Rating: IP54 (Dust & Water Resistant) Microphone Type: Omni-Directional Intrinsically Safe: No Audio Jack: None Weight: 3.5 oz Compatibility A8 BC130 BPR40 CP110 CP185 CP200XLS CP246i CP264i DEP450 EP350MX BPR40d CP200d PR400 CP100d CP150 CP200 What's Included Description SKU Status Motorola Mag One RSM PMMN4008A ✅ Included Integrated Swivel Clip N/A ✅ Included Coiled Audio Cable N/A ✅ Included Recommended Accessories Motorola Mag One Headset with PTT/Vox (PMLN4445A) Motorola BPR40 Replacement Li-Ion Battery (PMNN4075BR) Motorola UHF Stubby Antenna (PMAE4020AR) Frequently Asked Questions Can I plug an earpiece into the PMMN4008A? No, the Motorola PMMN4008A does not include a 3.5mm or 2.5mm auxiliary audio jack. If you require a privacy earpiece, consider the PMMN4075 or PMMN4076 models. Is this microphone waterproof? It is rated IP54, which means it is water-resistant against splashes and light rain, but it is not submersible. Does it work with the CP200d? Yes, the Motorola PMMN4008A uses the standard M1 2-pin connector which is fully compatible with the CP200d and DEP450. Warranty 1-year manufacturer's warranty.

Read more less

Icom 8930091121 Repeater Support Bracket The Icom 8930091121 is a heavy-duty support bracket essential for the secure and permanent installation of compatible Icom repeaters. This bracket provides critical structural support, ensuring the high-value repeater unit is rigidly fixed into its operating location, such as a communications rack or enclosure. By using the Icom 8930091121, system integrity is maintained by minimizing vibration and movement, which is vital for the continuous, reliable performance of sensitive repeater electronics. This component is precisely tailored for the FR9010, FR9020, and FR5200H repeater models. Key Features Structural Support: Provides the necessary rigid mounting structure for securing the heavy repeater chassis during installation. Secure Installation: Ensures the repeater unit is firmly fixed in place, protecting it from movement or accidental physical damage. Precise Repeater Fit: Specifically tailored for the Icom FR9010, FR9020, and FR5200H repeaters, guaranteeing perfect alignment and stability. Durable Construction: Built with robust metal to withstand the continuous vibration and stress of a repeater environment. Compatibility FR9010 FR9020 FR5200H Benefits Enhanced System Reliability: Ensures the repeater's components remain stable, maximizing uptime and consistent performance. Protects Equipment Investment: Secures the high-value repeater unit against theft or damage from movement within its mounting location. Professional Installation: Facilitates a clean, standardized, and structurally sound installation in any communications cabinet. Guaranteed Fit: Eliminates the need for custom fabrication by providing a purpose-built mounting solution.   Warranty 1-year manufacturer's warranty

Read more less

Motorola PMKN4233A USB Stereo Y-Cable for PC Interface The Motorola PMKN4233A is a specialized USB Stereo Y-Cable designed to interface compatible portable and mobile radios with a computer workstation. This cable is essential for system integration scenarios, allowing users to connect their radio for advanced applications like the Avigilon Radio Alert system, which sends alarms and text messages to radios. The Motorola PMKN4233A is the updated version of the Motorola PMLKN4233. The "Y" configuration typically implies a split output, routing signals for both data/charging (via USB) and audio (via the stereo jack). This cable is compatible with a wide range of MOTOTRBO XPR portable radios and is used to establish the donor radio connection needed for advanced data and messaging services within a radio network. Key Features USB and Stereo Interface: Features a specialized connector on one end that splits into standard USB and 3.5mm stereo plugs for PC connection. Enables Data and Messaging: Critical for interfacing the radio with software that utilizes text messaging, GPS data, and alarm notifications. Portable and Mobile Compatibility: Works across multiple generations and models of XPR series portable and mobile radios. System Integration Tool: Used to establish a "donor radio" link in advanced dispatch and alarm systems, connecting the radio network to a workstation. Compatibility XPR3300 XPR3500 XPR4300 XPR4500 XPR6300 XPR6500 XPR7300 XPR7500 Benefits Unlocks Data Applications: Provides the physical connection necessary to utilize sophisticated software-based features like alarm acknowledgments and text messaging services. Simplified Integration: The Y-cable design offers a streamlined way to connect both power/data and audio lines to a computer. Enhanced System Response: Facilitates the transfer of critical alerts from a video management system directly to field personnel via radio. Versatile Use: Applicable for both conventional radio programming and advanced data service implementation.   Warranty 1-year manufacturer's warranty

Read more less

Motorola TKN1039A Soft Opps Cable for KVL5000 The Motorola TKN1039A, commonly referred to as the "Soft Opps Cable," is a specialized accessory cable designed for use with the KVL 5000 Key Variable Loader. This cable provides the essential physical connection between the KVL5000 and the radio or cryptographic equipment, enabling secure and reliable transfer of encryption keys. This cable is critical for operations that require high-level communications security (COMSEC). The Motorola TKN1039A is an indispensable component for military, federal, and public safety technicians responsible for key management and ensuring the confidentiality of their encrypted radio communications fleet. Key Features Key Variable Loader (KVL) Cable: Specifically engineered to interface with the Motorola KVL 5000 for key management functions. Secure Key Transfer: Provides the necessary secure connection path for transferring cryptographic keys to radios and other COMSEC devices. Specialized Application: Designed for "Soft Opps" (Software-Defined Operational Purposes), indicating its use in sensitive and specialized programming scenarios. Durable Construction: Built to strict standards to ensure signal integrity and durability during mission-critical key loading procedures. Compatibility KVL5000 Benefits Guaranteed Security: Ensures the physical connection required for secure, tamper-free transfer of encryption keys, maintaining communication confidentiality. Essential for COMSEC: A mandatory tool for any organization using the KVL 5000 to manage their secure radio network. Reliable Performance: As an original component, it guarantees seamless electrical and functional compatibility with the KVL 5000 device. Simplified Key Management: Facilitates the necessary connection for efficient and accurate loading of cryptographic keys into the radio fleet.   Warranty 1-year manufacturer's warranty

Read more less

Icom OPC999 20ft Extension Cable - Expand Your CommandMic Reach The Icom OPC999 is a 20-foot extension cable designed to significantly extend the reach of your Icom COMMANDMIC II or HM-205RB speaker microphone. This cable allows for flexible installation, connecting your microphone to the OPC1000 extension cable and then to your main radio unit. It's an ideal solution for larger vessels or installations where the radio is not within easy reach of the operating position, ensuring convenient access to your communication controls. You can connect up to two Icom OPC999 cables in series with an OPC-1000, creating a total extension of up to 60 feet. This offers remarkable versatility for setting up multiple remote communication points. It seamlessly integrates with M605 and M506 radios, providing expanded command capabilities wherever you need them. Key Features 20-Foot Extension: Provides significant added length for flexible placement of your COMMANDMIC II or HM-205RB. Daisy-Chain Capable: Up to two OPC999 cables can be connected, extending your setup to a total of 60 feet with an OPC-1000. Seamless Integration: Designed to work perfectly with the OPC1000 extension cable and compatible Icom radios. Durable Construction: Built to withstand marine environments, ensuring reliable signal transmission over extended lengths. Enhanced Connectivity: Allows for connecting up to two HM205RB microphones with an M506 radio, or one with an M605, for multi-station control. Compatibility M605 M506 Benefits Extended Reach: Mount your radio in a secure, out-of-the-way location while keeping the CommandMic accessible from your helm or other desired areas. Flexible Installation: Customize your communication setup on larger boats or in complex installations with long cable runs. Multi-Station Control: Enables the use of multiple remote microphones, improving communication efficiency across different areas of a vessel. Reliable Connection: Ensures clear audio and consistent command functionality over extended distances. Convenience and Safety: Keeps your communication tools within easy reach, enhancing operational convenience and safety onboard.   Warranty 1-year manufacturer's warranty

Read more less

BK Technologies KAA0608A Service Cable Kit - Aeroflex Test Set for KNG-P Portables The BK Technologies KAA0608A is a service cable kit designed for connecting KNG Series portable radios to the Aeroflex 3920 Digital Radio Test Set. This kit provides a side port interface cable, enabling comprehensive testing and servicing of KNG-P series radios. The KAA0608A is the updated version of the KAA0608. Key Features Service Cable Kit: Provides essential cabling for radio maintenance and diagnostics. Aeroflex 3920 Compatibility: Specifically designed to interface with the Aeroflex 3920 Digital Radio Test Set. Side Port Interface: Connects to the side port of KNG Series portables for direct communication with test equipment. Compatibility KNG-P Series Benefits Comprehensive Testing: Enables full diagnostic capabilities using the Aeroflex 3920 Test Set. Accurate Servicing: Facilitates precise adjustments and repairs for KNG-P radios. Streamlined Workflow: Provides a dedicated and reliable connection for efficient radio servicing.   Warranty 1-year manufacturer's warranty

Read more less

Motorola PMKN4120A Motorola Ignition Sense Cable The Motorola PMKN4120A is a reliable ignition sense power cable designed to automatically manage the power state of your mobile two-way radio. By connecting your vehicle’s ignition system to the radio, it ensures that the radio powers on or off with the vehicle’s engine, providing convenience, efficiency, and preventing unnecessary battery drain. The Motorola PMKN4120A is the replacement product for the Motorola PMKN4120. Streamline your mobile radio operation with the Motorola PMKN4120A Ignition Sense Cable — designed to provide automatic, dependable power management for professional vehicle communication systems. PMKN4120A Key Features: Ignition Sense Integration: Powers the radio on and off with the vehicle’s ignition. Reliable Connection: Provides a stable and secure power link between the radio and vehicle. Easy Installation: Designed for simple and straightforward setup in mobile environments. PMKN4120A Benefits: Enhanced Efficiency: Automatically manages radio power, reducing manual operation and improving convenience. Battery Preservation: Helps prevent unnecessary battery drain when the vehicle is turned off. Professional Integration: Ideal for fleet, emergency, and commercial vehicle installations requiring seamless communication readiness. PMKN4120A COMPATIBILITY MTM5200 PMKN4120A WARRANTY *1-year manufacturer's warranty.

Read more less