Motorola PMKN4222A APX RSM Replacement Coiled Cable

Description

10-Inch Coiled Replacement RSM Cable with 3.5mm Audio Jack for APX Radios

Genuine Motorola Solutions Original replacement coiled cable kit with 3.5mm audio jack integration, engineered to restore the connection and extend the service life of APX-series remote speaker microphones.

The Motorola PMKN4222A is an authentic original equipment manufacturer (OEM) replacement cord assembly (catalog designation: ACCESSORY REPLACEMENT KIT, CABLE ASSY., GCAI SAA, 3.5 AUDIO JACK 10 INCH COIL LENGTH). Sourced directly from our verified inventory of Motorola Audio Accessories, this heavy-duty 10-inch coiled cable is designed to repair your existing Motorola Remote Speaker Microphone (RSM) when the original cord becomes stretched, cracked, severed, or suffers from intermittent connectivity.

Replacing the cord is a highly economical fleet maintenance strategy, allowing radio technicians and public safety departments to salvage fully functional microphone heads rather than purchasing entirely new RSM units. This specific replacement assembly is engineered for microphones featuring an integrated 3.5mm unthreaded audio jack, ensuring your listen-only earpieces continue to receive flawless, static-free audio. Terminating with the rugged Global Communication Accessory Interface (GCAI) multi-pin connector, the PMKN4222A establishes a secure, weather-sealed data and audio connection to the entire APX series of portable two-way radios (including standard, Li, XE, and SRX models).

Key Features & Benefits

  • Economical Fleet Maintenance: Saves significant department funds by allowing you to repair a damaged cord on a working speaker microphone instead of replacing the entire audio accessory.
  • Integrated 3.5mm Audio Jack Support: Specifically wired to restore full functionality to RSM models equipped with a 3.5mm unthreaded audio jack, ensuring flawless audio routing to listen-only earpieces.
  • 10-Inch High-Retention Coil: Features a 10-inch resting coil length built with heavy-duty elastomer shielding. It expands dynamically when you lift the mic and snaps securely back into place to prevent snagging on duty gear.
  • OEM GCAI Connector: Utilizes the genuine Motorola Global Communication Accessory Interface (GCAI) radio connector, guaranteeing proper weather sealing and data transmission to your APX radio.
  • Complete Replacement Kit: Includes the coiled cable, the external radio connector, and the internal housing block connection required for a direct factory-spec swap.

Specifications

Attribute Details
Brand Motorola Solutions
Model / SKU PMKN4222A (Supersedes PMKN4222)
Motorola Catalog Description ACCESSORY REPLACEMENT KIT, CABLE ASSY., GCAI SAA, 3.5 AUDIO JACK 10 INCH COIL LENGTH
Product Type Remote Speaker Microphone Replacement Cable
Cable Style Heavy-Duty Coiled Cord (10-Inch Resting Length)
Radio Connection GCAI Multi-Pin Connector (APX Series)
Audio Jack Support Wired for 3.5mm Unthreaded Audio Jack
Components Included Replacement Cable Only (Microphone head not included)
Installation Requirement Requires disassembly of the RSM housing (Torx bit typically required)

Compatibility

Compatible Motorola APX Portable Radios (via GCAI Connector)

APX2000 APX4000 APX4000XH APX5000
APX6000 APX6000LI APX6000XE APX7000
APX8000 APX8000H APX8000HSRX APX8000HXE
APX8000XE

Recommended Accessories & Replacement Hardware

Compatible Listen-Only Earpieces

Alternative Remote Speaker Microphones

More Resources

Frequently Asked Questions

Does this include the speaker microphone itself?

No. The Motorola PMKN4222A is strictly an internal replacement cord assembly. It does not include the microphone housing, speaker, or push-to-talk (PTT) switch. It is designed solely for repairing an existing, damaged APX remote speaker microphone.

How do I install this replacement cord?

Installing the PMKN4222A requires opening the sealed housing of your remote speaker microphone. This typically involves removing the rear casing screws (often utilizing a Torx T6 or T8 driver), unplugging the damaged cord block from the internal circuit board, seating the new cord's block (ensuring the 3.5mm jack contacts are properly aligned), securing the rubber weather-seal gasket, and re-tightening the housing to factory torque.

Does this cable work with MOTOTRBO XPR radios?

No. The PMKN4222A features Motorola's GCAI (Global Communication Accessory Interface) multi-pin connector, which is physically keyed specifically for the APX series (and compatible SRX radios). While MOTOTRBO XPR 7000e series radios look similar, their accessory connectors are electrically and physically different.

What does the "A" at the end of PMKN4222A mean?

Motorola Solutions uses trailing revision letters (A, B, C, and so on) at the end of accessory part numbers to denote sequential factory hardware revisions, updated wiring harnesses, or material refinements over a product's lifecycle. A trailing letter change does not alter compatibility—the PMKN4222A is a 100% form-, fit-, and electrically compatible direct replacement for the original PMKN4222.

 

Warranty

1-year manufacturer’s replacement warranty.

Motorola PMKN4222A APX RSM Replacement Coiled Cable

Product form

SKU: PMKN4222A

$149.07 $124.99

      Description

      10-Inch Coiled Replacement RSM Cable with 3.5mm Audio Jack for APX Radios

      Genuine Motorola Solutions Original replacement coiled cable kit with 3.5mm audio jack integration, engineered to restore the connection and extend the service life of APX-series remote speaker microphones.

      The Motorola PMKN4222A is an authentic original equipment manufacturer (OEM) replacement cord assembly (catalog designation: ACCESSORY REPLACEMENT KIT, CABLE ASSY., GCAI SAA, 3.5 AUDIO JACK 10 INCH COIL LENGTH). Sourced directly from our verified inventory of Motorola Audio Accessories, this heavy-duty 10-inch coiled cable is designed to repair your existing Motorola Remote Speaker Microphone (RSM) when the original cord becomes stretched, cracked, severed, or suffers from intermittent connectivity.

      Replacing the cord is a highly economical fleet maintenance strategy, allowing radio technicians and public safety departments to salvage fully functional microphone heads rather than purchasing entirely new RSM units. This specific replacement assembly is engineered for microphones featuring an integrated 3.5mm unthreaded audio jack, ensuring your listen-only earpieces continue to receive flawless, static-free audio. Terminating with the rugged Global Communication Accessory Interface (GCAI) multi-pin connector, the PMKN4222A establishes a secure, weather-sealed data and audio connection to the entire APX series of portable two-way radios (including standard, Li, XE, and SRX models).

      Key Features & Benefits

      • Economical Fleet Maintenance: Saves significant department funds by allowing you to repair a damaged cord on a working speaker microphone instead of replacing the entire audio accessory.
      • Integrated 3.5mm Audio Jack Support: Specifically wired to restore full functionality to RSM models equipped with a 3.5mm unthreaded audio jack, ensuring flawless audio routing to listen-only earpieces.
      • 10-Inch High-Retention Coil: Features a 10-inch resting coil length built with heavy-duty elastomer shielding. It expands dynamically when you lift the mic and snaps securely back into place to prevent snagging on duty gear.
      • OEM GCAI Connector: Utilizes the genuine Motorola Global Communication Accessory Interface (GCAI) radio connector, guaranteeing proper weather sealing and data transmission to your APX radio.
      • Complete Replacement Kit: Includes the coiled cable, the external radio connector, and the internal housing block connection required for a direct factory-spec swap.

      Specifications

      Attribute Details
      Brand Motorola Solutions
      Model / SKU PMKN4222A (Supersedes PMKN4222)
      Motorola Catalog Description ACCESSORY REPLACEMENT KIT, CABLE ASSY., GCAI SAA, 3.5 AUDIO JACK 10 INCH COIL LENGTH
      Product Type Remote Speaker Microphone Replacement Cable
      Cable Style Heavy-Duty Coiled Cord (10-Inch Resting Length)
      Radio Connection GCAI Multi-Pin Connector (APX Series)
      Audio Jack Support Wired for 3.5mm Unthreaded Audio Jack
      Components Included Replacement Cable Only (Microphone head not included)
      Installation Requirement Requires disassembly of the RSM housing (Torx bit typically required)

      Compatibility

      Compatible Motorola APX Portable Radios (via GCAI Connector)

      APX2000 APX4000 APX4000XH APX5000
      APX6000 APX6000LI APX6000XE APX7000
      APX8000 APX8000H APX8000HSRX APX8000HXE
      APX8000XE

      Recommended Accessories & Replacement Hardware

      Compatible Listen-Only Earpieces

      Alternative Remote Speaker Microphones

      More Resources

      Frequently Asked Questions

      Does this include the speaker microphone itself?

      No. The Motorola PMKN4222A is strictly an internal replacement cord assembly. It does not include the microphone housing, speaker, or push-to-talk (PTT) switch. It is designed solely for repairing an existing, damaged APX remote speaker microphone.

      How do I install this replacement cord?

      Installing the PMKN4222A requires opening the sealed housing of your remote speaker microphone. This typically involves removing the rear casing screws (often utilizing a Torx T6 or T8 driver), unplugging the damaged cord block from the internal circuit board, seating the new cord's block (ensuring the 3.5mm jack contacts are properly aligned), securing the rubber weather-seal gasket, and re-tightening the housing to factory torque.

      Does this cable work with MOTOTRBO XPR radios?

      No. The PMKN4222A features Motorola's GCAI (Global Communication Accessory Interface) multi-pin connector, which is physically keyed specifically for the APX series (and compatible SRX radios). While MOTOTRBO XPR 7000e series radios look similar, their accessory connectors are electrically and physically different.

      What does the "A" at the end of PMKN4222A mean?

      Motorola Solutions uses trailing revision letters (A, B, C, and so on) at the end of accessory part numbers to denote sequential factory hardware revisions, updated wiring harnesses, or material refinements over a product's lifecycle. A trailing letter change does not alter compatibility—the PMKN4222A is a 100% form-, fit-, and electrically compatible direct replacement for the original PMKN4222.

       

      Warranty

      1-year manufacturer’s replacement warranty.

      Recently viewed products

          • Ach Direct Debit
          • Amazon
          • American Express
          • Apple Pay
          • Diners Club
          • Discover
          • Google Pay
          • JCB
          • Maestro
          • Mastercard
          • PayPal
          • Shop Pay
          • Union Pay
          • USDC
          • Visa

          © 2026 Atlantic Radio Communications Corp.

          Login

          Forgot your password?

          Don't have an account yet?
          Create account