All Products

Icom 8810004861 Phillips Screw M2x6mm - Replacement Radio Hardware The Icom 8810004861 is a specialized Phillips screw (M2x6mm) designed as a direct replacement hardware component for various Icom portable radios. This small but essential part is typically used to secure external components, such as the audio jack cover plates, to the radio chassis, playing a vital role in maintaining the device's structural integrity and environmental seal. Ensuring that all external screws are in place and properly secured is crucial for maintaining the radio's original IP (Ingress Protection) rating. The Icom 8810004861 is the precise hardware needed by technicians for performing proper maintenance and repair on the F1000, F2000, and F3000/F4000 series radios. Key Features M2x6mm Phillips Screw: The exact dimensional and head type specification for securing external components on compatible Icom radios. Maintains Environmental Seal: Essential hardware for ensuring cover plates and accessories are sealed to the radio housing, preserving the device's IP rating. Component for Radio Repair: The correct screw needed to replace stripped, lost, or damaged hardware during routine maintenance or part replacement. Durable Construction: Built to the manufacturer's standards to withstand vibration and daily wear without loosening. Compatibility F1000 F2000 F1100D F2100D F3001 F4001 F3011 F4011 Benefits Restores Structural Integrity: Guarantees that external parts are firmly fastened, preventing rattling or structural damage during use. Preserves IP Rating: Critical for securing the radio's dust and water resistance after the housing has been opened or serviced. Cost-Effective Maintenance: A small, inexpensive part that is crucial for properly completing a professional radio repair. Guaranteed Fit: Ensures the screw fits precisely into the pre-tapped holes of the compatible Icom radio chassis.   Warranty 1-year manufacturer's warranty

Read more less

Motorola PMAN4010A Magnetic Mount GPS/GLONASS Active Antenna The Motorola PMAN4010A is a compact, magnetic mount active antenna designed to provide precise and reliable location tracking for compatible mobile radio systems. This versatile antenna is essential for fleet management and situational awareness, supporting both GPS and GLONASS satellite systems for enhanced accuracy and global coverage. The Motorola PMAN4010A is the updated version of the Motorola PMAN4010. Offering discreet and flexible installation, the Motorola PMAN4010A can be quickly mounted on vehicle roofs or trunk lids using its powerful magnetic base. It is engineered for simple integration with a wide range of MOTOTRBO mobile radios, ensuring consistent signal acquisition and dependable location data for your vehicle fleet. Key Features GPS/GLONASS Compatibility: Supports both Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) for enhanced accuracy and quick position fix times. Active Antenna Design: Provides signal amplification, ensuring strong and reliable reception of satellite signals even in challenging environments. Magnetic Mounting: Features a powerful magnetic base for quick, easy, and temporary installation on vehicle metal surfaces. Vehicular Installation: Optimized for external vehicle mounting on roofs or trunk lids to provide the best line-of-sight to navigation satellites. Wide Frequency Band Support: Designed to operate across the necessary frequency bands for GPS, GLONASS, and general GNSS (Global Navigation Satellite System) use. Compatibility CM7668 CM7668I DGM4100 DGM5000E DGM5500E DGM6100 DGM8000E DGM8500E DM3000 DM4400 DM4400E DM4401 DM4401E DM4600E DM4601E XIRM8620I XIRM8628I XIRM8660I XIRM8668 XIRM8668I XPR4350 XPR4550 XPR5350 XPR5350E XPR5380E XPR5550 XPR5550E XPR5580E Benefits Enhanced Location Accuracy: Dual GPS/GLONASS support provides greater visibility to satellites, leading to more precise and reliable location data. Simplified Fleet Management: Enables real-time, accurate Automatic Vehicle Location (AVL) functionality for dispatch and asset tracking systems. Quick Installation: The magnetic mount allows for fast, tool-free deployment, which is ideal for temporary setups or rapid vehicle outfitting. Dependable Signal Acquisition: The active design ensures consistent signal lock-on, even when the vehicle is in motion or in areas with obstructed views.   Warranty 1-year manufacturer's warranty

Read more less

BK Technologies BKR0893-148 ALL BAND ANTENNA The BK Technologies BKR0893-148-E20 3 is a 20cm all band whip antenna for the BKR9000 series. The frequency ranges the antenna is capable of covering are VHF (136-174MHz), UHF (380-520MHz), and 763-870MHz.  BKR0893-148-E20 COMPATIBILITY BKR9000 Series WARRANTY * 1-year manufacturer's warranty.

Read more less

Motorola ATU-21DS Compact and Reliable: The Motorola ATU-21DS Super Stubby Antenna The Motorola ATU-21DS (AAM28X503) is an ultra-compact UHF antenna, designed for radios operating in the 440-470 MHz frequency range. With its super stubby design and durable build, this antenna is perfect for professionals who need a lightweight and reliable communication accessory. Upgrade your Motorola EVX-S24 with the ATU-21DS super stubby antenna, the perfect blend of performance and portability. For more information, start a chat in the bottom right corner or contact us here. Motorola ATU-21DS Key Features Frequency Range: UHF (440-470 MHz), ensuring strong and clear signal performance. Super Stubby Design: At only 2 inches, it is ultra-compact for maximum portability. SMA-Female Connector: Provides secure and easy attachment to your radio. Durable Construction: Built to withstand daily use in tough environments. Motorola ATU-21DS Benefits Streamlined Size: The short antenna design makes it ideal for discreet or on-the-go use. Enhanced Compatibility: Works seamlessly with compatible Motorola radios for consistent communication. Robust Performance: Despite its small size, it offers reliable signal coverage. Motorola ATU-21DS Compatibility EVX-S24 Motorola ATU-21DS Warranty *1-Year Manufacturer’s Warranty.

Read more less

Motorola PMAE4006A UHF (465–495 MHz) Stubby Helical Antenna Compact 9cm UHF stubby helical antenna with stud mount for Motorola CP, HT, GP, and related portable radios. The Motorola PMAE4006A is a genuine OEM stubby helical antenna covering the UHF 465–495 MHz band, fitted with a standard stud mount. At 9cm (3.5 inches), the low-profile form factor reduces snag risk and improves comfort for belt-worn radios — ideal for security, hospitality, and facility personnel. The helical core provides reliable signal integrity and durability for daily professional use. Note: This antenna is tuned for 465–495 MHz UHF only. Verify your frequency plan before use. It does not include an integrated GPS element. Key Features & Benefits 465–495 MHz UHF Tuning: Optimized for clear transmission and reception within the UHF band used by CP, HT, and GP series radios. 9cm Stubby Profile: Low-profile design reduces snag risk and improves comfort during active belt-worn use. Helical Core: High-quality internal windings provide robust RF performance and long-term durability. Stud Mount: Standard stud connector for quick, tool-free field replacement. Genuine Motorola OEM Part: Factory-authorized antenna ensuring correct impedance matching and RF performance. Specifications Attribute Details Brand Motorola Solutions Model / SKU PMAE4006A Product Type Stubby Helical Antenna Frequency Range 465–495 MHz (UHF) Length 9 cm (3.5 in) Mounting Style Stud Integrated GPS No Country of Origin Malaysia Compatibility Model Series CP100d, CP185, CP200, CP200d, CP261, CP264i Motorola CP Series DEP250, DP540 Motorola DEP/DP Series EP350MX Motorola EP Series GP329+, GP339+, GP340, GP344, GP380, GP388 Motorola GP Series HT750, HT1250, HT1250LS, HT1250LS+, HT1550XLS Motorola HT Series PR860, EX500, EX600, P100 Series Motorola PR/EX/P Series PRO5150, PRO7150, PRO7150 Elite Motorola PRO Series XIR C1200, XIR C2620, XIR C2660 Motorola XIR Series Recommended Accessories Compatible Radios Motorola CP100d Portable Two-Way Radio — Compatible CP series radio for this antenna. Motorola CP200d DMR Two-Way Radio — Compatible CP series radio for this antenna. Batteries Motorola NNTN4497DR 7.4V 2250mAh Li-Ion Battery for CP200d — High-capacity replacement battery for CP200d series radios. Frequently Asked Questions Why choose a stubby antenna over a whip antenna? Stubby antennas are significantly shorter, providing better comfort for belt-worn radios and preventing snagging on clothing or equipment. They may have a slightly reduced range compared to a full-length whip in very weak signal areas. Is this antenna compatible with the R2 series? While the R2 uses a similar mount, verify your specific frequency plan before use. The PMAE4006A is optimized for 465–495 MHz and may not be the best match for R2 deployments using different frequency ranges. Does this antenna support GPS? No. The PMAE4006A is a voice-only antenna and does not include an integrated GPS element. Warranty 1-year manufacturer’s warranty.

Read more less

Atlantic Radio BPR40 Programming Cable USB Programming Cable Motorola BPR40 Two-Way Radios This Atlantic Radio USB programming cable for the Motorola BPR40 portable two-way radios. This programming cable does not include the programming software.  We are an authorized Motorola dealer. 

Read more less

PD682i Front Cover Housing Replacement The Hytera HYT-11530000000080 is a complete front cover housing replacement designed for the PD682i portable radio. This essential part includes both the screen and keypad, providing a straightforward and cost-effective solution for repairing a damaged or worn-out radio. This replacement housing ensures that your radio's appearance and functionality are fully restored. The Hytera HYT-11530000000080 also fits the PD685 and PD686 Hytera models, offering versatile compatibility for a range of radios and serving as a vital component for maintaining your fleet's equipment. Key Features Front Cover Housing Replacement: Provides a complete replacement for the radio's front cover. Includes Screen and Keypad: Comes as a single unit with the screen and keypad pre-installed for easy repair. Restores Functionality: Replaces damaged or non-functional screens and keypads, bringing the radio back to its original state. Durable Construction: Built to Hytera's quality standards for reliable and long-lasting performance. Cost-Effective Repair: A simple replacement part that avoids the need for a full radio replacement. Compatibility PD682i PD685 PD686 Benefits Extended Radio Lifespan: Replacing the front cover and components prolongs the life of your radio, protecting your investment. Maintained Usability: Ensures the screen is clear and the keypad is fully functional for effortless operation. Aesthetic Restoration: Restores the radio's appearance, making it look new again. Versatile Compatibility: Fits a small range of Hytera models, providing a flexible replacement option.   Warranty 1-year manufacturer's warranty

Read more less

Hytera POA77 The Hytera POA77 is a vehicle sun visor microphone, straight barrel type, used with POA117.    *1-year manufacturer's warranty.

Read more less

Hytera AN0158H05 VHF/GPS Stubby Helical Antenna Low-Profile, Durable Communication for Covert and Belt-Worn Radios The Hytera AN0158H05 is a professional-grade VHF stubby antenna engineered for high-discretion and covert operations. Measuring only 9cm (3.5 inches) in length, this helical antenna features a high-performance brass core that ensures reliable signal transmission and reception while maintaining a non-obtrusive profile. Optimized for the 153–164 MHz frequency range, the Hytera AN0158H05 also includes a dedicated 1575 MHz element for seamless GPS/GLONASS satellite tracking, making it an essential accessory for teams requiring location-based services alongside voice communications. Specifically designed for Hytera’s slim-line X1 and PD6 series portables, the stubby design is ideal for users who wear their radios on a belt or concealed under clothing. By minimizing the physical length of the antenna, the AN0158H05 reduces the risk of snagging on gear or environment obstacles without compromising the structural integrity of the helical core. With a durable SMA-male connector, this antenna provides a secure, vibration-proof fit for years of safe and effective field communication. Key Features & Benefits Dual-Band Functionality: Optimized for VHF voice communications (153–164 MHz) and integrated GPS/GLONASS tracking (1575MHz). Low-Profile Helical Design: At only 9cm long, it is perfect for covert use or belt-worn applications where a standard whip antenna would be too cumbersome. Helical Brass Core: Constructed with a high-quality brass core for superior conductivity, durability, and long-term reliability. Professional SMA-Male Connector: Precision-engineered interface ensures a stable and secure connection to the radio chassis. Covert Optimized: The short, non-obtrusive form factor prevents the radio from "printing" under clothing and reduces snagging on tactical gear. Ruggedized Outer Sleeve: Built to withstand daily wear and tear in demanding professional environments. Specifications Feature Specification Frequency Range 153–164 MHz / 1575 MHz Connector Type SMA-Male Length 9cm (3.5 in) Antenna Type Helical Stubby GPS/GLONASS Support Yes Core Material Brass Compatibility PD602i PD662i PD682i X1ei X1pi Recommended Accessories Hytera PD682i UL913 Intrinsically Safe Radio Hytera SM26N1-P Remote Speaker Microphone Hytera Programming Cable (PC45) More Resources Hytera Antenna Frequency Selection Guide Covert Communication Systems Best Practices Frequently Asked Questions Will this antenna work for standard VHF frequencies outside the 153–164 MHz range? This antenna is specifically tuned for the 153–164MHz window. Using it significantly outside this range may lead to increased SWR and reduced transmission range. Is this antenna waterproof? When correctly seated on a compatible Hytera radio with an O-ring seal, the antenna helps maintain the radio's environmental rating (IP67/IP68). Does this antenna require tools for installation? No. It features a standard SMA-male connector that is easily hand-tightened onto the radio's antenna stud. Warranty 1-year manufacturer's warranty.

Read more less

High-Capacity Li-Ion Battery - 2300mAh with IP57 Rating The Atlantic Radio FNB-V134LI-AR is a high-capacity 2300mAh lithium-ion battery designed to keep your compatible Motorola EVX and VX series radios powered up throughout your workday. This battery provides long-lasting performance and improved reliability, ensuring you stay connected when it matters most. With a durable IP57 rating, this battery is protected against dust and water, making it a reliable power source for your radios, even in challenging environments. The Atlantic Radio FNB-V134LI-AR is a compact and dependable aftermarket accessory, providing a cost-effective power solution for your communication needs. Key Features High Capacity (2300mAh): Provides extended operating time for your radio, minimizing downtime during demanding operations. Lithium-Ion Technology: Offers a longer lifespan and improved performance compared to traditional batteries. IP57 Rating: Ensures protection against dust ingress and water submersion, enhancing durability in challenging environments. Compact Design: Measures 0.88" (W) x 4" (H) x 2.25" (L) and is a lightweight power source. Reliable Performance: Engineered to provide consistent and stable power to your radio. Compatibility with Motorola Radios EVX261 EVX531 EVX534 EVX539 VX260 VX261 VX264 VX450 VX451 VX454 VX459 Benefits Extended Operating Time: Stay connected for longer shifts and demanding operations without needing to recharge. Improved Reliability: Reduces the risk of downtime due to battery failure, ensuring you are always connected. Cost-Effective Solution: A long-lasting battery minimizes the need for frequent replacements. Durable in Harsh Conditions: The IP57 rating provides peace of mind in dusty or wet environments. Easy to Install: Quickly and easily swap out your old battery for this new one.   Warranty 1-year manufacturer's warranty

Read more less

Motorola PMLN6763A Heavy-Duty, Behind-the-Head Headset (TIA4950, 24 dB NRR) The Motorola PMLN6763A is a premium, heavy-duty headset engineered for extreme noise environments and worker safety. This essential communication tool is TIA4950 (UL) Intrinsically Safe certified, ensuring it can be used safely in hazardous locations where flammable materials may be present. The Motorola PMLN6763A is the updated version of the Motorola PMLN6763. Designed with an ergonomic behind-the-head style, this headset delivers superior audio quality for both receive and transmit audio. It provides an exceptional Noise Reduction Rating (NRR) of 24 dB, protecting the user's hearing while the noise-canceling boom microphone ensures crystal-clear outbound transmissions. The large Push-To-Talk (PTT) button is conveniently located on the ear muff for easy access, even when wearing heavy gloves. Key Features TIA4950 (UL) Intrinsically Safe: Certified for safe operation in hazardous (HazLoc) environments, meeting stringent safety compliance standards. Superior Hearing Protection: Features a high Noise Reduction Rating (NRR) of 24 dB, effectively protecting the user's hearing in extremely loud working conditions. Noise-Canceling Boom Microphone: Actively suppresses ambient noise, ensuring the transmitted voice is clear and intelligible, even in high-noise environments. Behind-the-Head Style: Provides a secure and comfortable fit, ideal for use with hard hats or helmets. Ear-Muff PTT: The large Push-To-Talk button is located directly on the ear cup, ensuring easy and quick access even when wearing protective gloves. Dual-Ear Speakers: Delivers clear audio to both ears, maximizing reception quality. Compatibility DEP550 DEP550E DEP570 DEP570E DGP8050EELITE DGP8050ELITE R3 XPR3300 XPR3300E XPR3500 XPR3500E XPR3550 XPR3550E R5   Benefits Maximum Worker Safety: TIA4950 certification and 24 dB NRR protect both the worker and the working environment from physical and acoustic hazards. Crystal Clear Transmission: The noise-canceling boom mic ensures the user's voice is understood despite extreme background noise (machinery, traffic, etc.). Ergonomic and Versatile: Behind-the-head design is compatible with most head protection and provides a secure fit for active users. Instant Communication: Ear-muff PTT is designed for rapid, gloved operation, improving safety response time.   Warranty 1-year manufacturer's warranty

Read more less

Icom BC207S 12V AC Adapter High-Efficiency Switching Power Supply for Icom Multi-Chargers and Gateway Controllers The Icom BC207S is a high-performance switching-type AC adapter designed to provide a stable 12V power source for professional Icom communication hardware. Engineered for reliability and consistent power delivery, this adapter is the primary power sourcVEPG3e for advanced WLAN gateway controllers and high-capacity multi-charger systems. By utilizing the Icom BC207S, organizations ensure their network controllers and radio fleets remain powered without the risk of voltage fluctuations that can occur with third-party alternatives. Capable of delivering a robust 3.5A output, the Icom BC207S is built to handle the heavy electrical demands of multi-unit charging and gateway processing. Its compact, switching-power design minimizes heat generation and maximizes energy efficiency, making it ideal for continuous 24/7 operation in server rooms or dispatch centers. The Icom BC207S is specifically manufactured to meet the technical requirements of the IP-WLAN and LTE radio series, ensuring long-term battery health and device longevity. The Icom BC207S features a specialized barrel-style connector designed for a secure, tight-fitting interface with the host device. Whether powering the IP1100CV gateway or a desktop rapid charger for the IP110H, this adapter provides the industrial-grade durability required for mission-critical infrastructure. Choosing the genuine Icom BC207S ensures that your communication system stays online and your portable units are fully charged for every shift. Key Features & Benefits High-Capacity 3.5A Output: The Icom BC207S provides ample power to support multi-charger bases and complex network gateway controllers. Stable Switching Technology: Designed to convert AC power to a precise 12V DC output, protecting sensitive internal circuitry from power surges. Industrial Build Quality: The Icom BC207S is manufactured with high-grade components to withstand the rigors of professional and commercial use. Energy Efficient: The switching-type design of the Icom BC207S reduces energy consumption and minimizes thermal output during operation. OEM Compatibility: Specifically engineered for the Icom IP-Advanced Radio System, ensuring a perfect electrical match for WLAN and LTE hardware. Global Voltage Support: Capable of handling a wide range of input voltages, making the Icom BC207S versatile for various regional power standards. Specifications Brand: Icom Input Voltage: 100–240V AC Output Voltage: 12V DC Output Current: 3.5A Adapter Type: Switching AC Adapter Connector Type: Barrel Plug Weight: Approx. 250g Compatibility IP504H IP110H IP1100CV VEPG3 Recommended Accessories AC Power Cable (OPC-515L) Multi-Unit Charger (BC-214) Six-Unit Charger (BC-211) What's Included Icom BC207S 12V AC Adapter User Instructions More Resources Icom BC207S Data Sheet Shop all Icom IP1100CV Accessories Frequently Asked Questions Can I use the BC207S for a single-unit charger? While the Icom BC207S provides 12V, it is primarily designed for multi-chargers and gateways; check your specific single-unit charger manual for current requirements. Does it include the wall power cord? Yes, the Icom BC207S is typically supplied with the necessary AC cable for North American outlets. Is this compatible with the IP100H series? Yes, the Icom BC207S is the designated power supply for the gateway controllers and multi-chargers used with the IP-WLAN series. Warranty 1-year manufacturer's warranty

Read more less

Battery for RM Series Portable Radios The Motorola PMNN4434A is a 2100mAh, 7.4V lithium-ion battery designed to provide reliable and extended power for compatible Motorola portable two-way radios in the RM series. The Motorola PMNN4434A is the updated version of the Motorola PMNN4434. Key Features High Capacity (2100mAh): Delivers extended operating time, minimizing the need for frequent recharges and ensuring prolonged radio use. Li-Ion Chemistry: Provides a lightweight and high-energy-density power source for consistent and reliable performance. 7.4V Output: Supplies the optimal voltage required by compatible Motorola portable radios for efficient operation. Compatibility RMU2040 RMU2080 RMU2080d RMV2080 RMM2050 XT420 XT460 Benefits Extended Talk Time: High capacity ensures long-lasting power for uninterrupted communication throughout extended shifts. Reliable Performance: Lithium-ion technology provides stable power delivery in demanding professional environments. Lightweight Portability: Offers a balance of power and ease of carrying for comfortable use. Warranty 1-year manufacturer's warranty

Read more less

Icom Mounting Bracket for F5061 and F6061 Mobile Radios Genuine OEM mounting bracket for Icom F5061 and F6061 series mobile two-way radios. The Icom 8010020700 (formerly known as the F5061 MMB) is the genuine OEM mounting bracket included with the Icom F5061 and F6061 mobile two-way radios. It is available as a standalone replacement part for fleet managers and technicians who need to replace a damaged or missing bracket without purchasing a complete radio unit. Compatible with the F5061, F6061, F5360D, and F6360D mobile radio series. Key Features & Benefits Genuine OEM Part: Factory-authorized Icom mounting bracket ensuring a precise fit and secure installation for compatible F-series mobile radios. Replacement Availability: Available as a standalone part, allowing replacement of a damaged or missing bracket without replacing the entire radio. Secure Vehicle Mounting: Provides a stable, fixed mounting point for the radio in vehicle installations. Durable Construction: Built to Icom's quality standards for long-term use in vehicle and fixed-mount environments. Specifications Attribute Details Brand Icom Model / SKU 8010020700 (formerly F5061 MMB) Product Type Mobile Radio Mounting Bracket Country of Origin Japan Compatibility F5061 F6061 F5360D F6360D Recommended Accessories Microphones Icom HM148T Heavy Duty DTMF Microphone for Mobile Radios — Heavy-duty DTMF hand microphone compatible with Icom F-series mobile radios. Icom HM-148G Mobile Microphone Heavy Duty IP54 — IP54-rated heavy-duty hand microphone with 8-pin connector for Icom F-series mobile radios. Programming Icom OPC2344 Programming Cable for Two-Way Radios — USB programming cable for compatible Icom mobile radios including the F5061 and F6061 series. Frequently Asked Questions Is the 8010020700 the same as the F5061 MMB? Yes. The Icom 8010020700 is the same part as the F5061 MMB. Icom updated the part number from F5061 MMB to 8010020700. Both refer to the identical genuine OEM mounting bracket for the F5061 and F6061 mobile radio series. Is the 8010020700 a genuine Icom part? Yes. The 8010020700 is the genuine OEM mounting bracket that ships with the Icom F5061 and F6061 mobile radios. It is available as a standalone replacement part for fleet maintenance and repair. Which Icom radios are compatible with the 8010020700? The 8010020700 is compatible with the Icom F5061, F6061, F5360D, and F6360D mobile two-way radios. Can I order this bracket if my original was damaged or lost? Yes. The 8010020700 is available as a standalone replacement part, allowing you to restore your radio's vehicle mounting without replacing the entire unit. Contact Atlantic Radio if you need assistance confirming compatibility with your specific radio. Warranty Covered by a 1-year manufacturer's warranty.

Read more less

Motorola PMAF4011A GPS Whip Antenna for Enhanced Coverage and Tracking The Motorola PMAF4011A is a high-performance GPS whip antenna designed for seamless communication and location tracking. Operating within the 806–870 MHz frequency range, this antenna is an excellent choice for professionals who require reliable connectivity and GPS functionality in mission-critical environments. Key Features GPS-Enabled Design: Provides precise location tracking for improved operational efficiency. Wide Frequency Range: Operates within the 806–870 MHz band, ensuring reliable and consistent communication. Whip Antenna Design: Offers enhanced signal reception and transmission for extended coverage. Durable Construction: Built to endure challenging conditions, ensuring long-lasting performance. Effortless Integration: Easily connects to compatible Motorola radios for immediate use. Compatibility XPR7350e XPR7550e XPR7580e XPR5550e XPR5580e XPR8380 XPR8400 R7 Benefits Improved Location Tracking: Enables GPS functionality for enhanced fleet and personnel management. Superior Connectivity: Delivers exceptional signal clarity even in demanding environments. Extended Coverage: Ensures robust communication over a wide operational range. Rugged and Reliable: Withstands tough work conditions, minimizing downtime and replacement costs. Versatile Applications: Ideal for industries such as logistics, public safety, and construction. Warranty 1-year manufacturer's warranty.

Read more less

Motorola PMLN6532A Mag One Swivel Earpiece with In-Line Mic, PTT, and VOX Flexible and Ergonomic Audio Solution for Discreet Fleet Communication The Motorola PMLN6532A is a professional-grade Mag One swivel earpiece designed to provide a secure, comfortable, and highly adaptable communication interface for two-way radio users. Featuring a unique swivel C-shell ear hook, this accessory allows the earpiece to be easily adjusted for use on either the left or right ear, ensuring a personalized fit for every user. The Motorola PMLN6532A is an essential tool for professionals in security, retail, and hospitality who require a low-profile audio solution that remains comfortable during long, demanding shifts. The Motorola PMLN6532A is the updated version of the Motorola PMLN6532. Equipped with an integrated in-line microphone and a dedicated Push-to-Talk (PTT) button, the Motorola PMLN6532A also features a built-in VOX (Voice-Activated Transmission) switch. When used with VOX-compatible radios, this allows for hands-free communication, enabling staff to stay connected while performing manual tasks. The high-quality speaker element delivers clear, intelligible audio even in moderately noisy environments, while the reinforced cabling is built to withstand the physical rigors of daily commercial use. Key Features & Benefits Swivel C-Shell Design: The Motorola PMLN6532A features a flexible ear hook that swivels to fit comfortably on either the left or right ear. Integrated VOX Switch: Includes a toggle for hands-free Voice-Activated Transmission, providing maximum flexibility in the field. In-Line Mic & PTT: Features a tactile PTT button and a high-sensitivity microphone for crisp voice transmissions. Ergonomic Comfort: The small, lightweight form factor is specifically designed for extended wear without causing pressure points. Discreet Operation: The sleek black finish and low-profile design allow for subtle communication in public-facing environments. Rugged Connectivity: Built with a durable 2-pin connector and strain-relief points to prevent cable failure during active use. Specifications Brand: Mag One (Motorola Solutions) Part Number: PMLN6532A Earpiece Type: Over ear Microphone: In-line Omni-directional PTT: In-line with VOX Toggle Switch Connector Type: Motorola 2-Pin Dimensions (H x W x L): 2.25 x 1.00 x 1.50 inches Metric Dimensions: 57.15mm x 25.40mm x 38.10mm Color: Black Compatibility BC400D BPR50DX DEP250 DEP450 DP1400 R2 X10D Recommended Accessories Replacement Foam Earpad (RLN6232A) Mag One 2-Inch Belt Clip (PMLN8600A) 1-Meter USB-C Charging Cable (PMKN4274A) What's Included Motorola PMLN6532 Mag One Swivel Earpiece with Mic & PTT User Instruction Guide Frequently Asked Questions Can this earpiece be used on both ears? Yes, the swivel hinge allows the ear hook to rotate for either left or right-ear placement. Does the VOX switch work with all radios? The VOX feature requires your radio to be programmed for Voice-Activated Transmission. Is the ear hook adjustable? The C-shell design is flexible and designed to sit securely on a wide variety of ear shapes. Warranty 1-year manufacturer's warranty

Read more less

Hytera HYT-5105030000388A Speaker Microphone Replacement Cable Professional Grade Maintenance Solution The Hytera HYT-5105030000388A is a specialized replacement cable designed to extend the service life of your professional speaker microphones. This high-quality accessory allows for the immediate repair of damaged or worn-out cables, ensuring that your communication gear remains operational without the need to replace the entire microphone unit. Constructed with durable materials to withstand the rigors of daily field use, this cable features the specific multi-pin connector required for Hytera’s mid-to-high-tier portable radios. Its flexible, coiled design provides ample reach while preventing tangling, making it an essential component for fleet maintenance and long-term reliability in the field. Key Features Direct OEM Replacement: Engineered specifically for Hytera speaker microphones to ensure perfect fitment and audio signal integrity. Coiled Cable Design: Provides flexibility and prevents snagging, allowing for comfortable movement during active duty. Durable Strain Relief: Built with reinforced connectors to handle frequent bending and pulling in demanding environments. Cost-Effective Repair: Minimizes downtime and maintenance costs by allowing for component-level replacement of high-wear parts. Compatibility Speaker Microphones SM26N1 SM26N1-P SM26N2 SM26N2-P Radios PD602i PD662i PD682i HP602 HP682 HP702 HP782 X1ei X1pi Specifications Part Number: HYT-5105030000388A Type: Replacement Microphone Cable Connector Type: Hytera Multi-pin Application: Maintenance and Repair Manufacturer: Hytera Benefits Extended Equipment Life: Keep your SM26 series microphones in top condition by replacing only the cord when it shows signs of wear. Reliable Audio: High-quality internal wiring ensures that clear voice transmission and reception are maintained. Easy Installation: Designed for straightforward replacement, getting your team back to work quickly. Warranty 1-year manufacturer's warranty.

Read more less

Icom FAS83V VHF Flexible Antenna - High-Gain Communication Range The Icom FAS83V is a high-performance, flexible VHF antenna specifically designed for professional-grade portable radios. Operating within the 160-174 MHz frequency range, this 7-inch (180 mm) antenna is engineered to provide superior signal transmission and reception. Its flexible rubber construction is built to withstand the rigors of daily field use, preventing damage while maintaining consistent connectivity for mission-critical operations. As a high-gain antenna solution, the Icom FAS83V is optimized to increase both the range and quality of radio communications. By providing a more efficient radiation pattern compared to standard stubby antennas, it ensures that users in public safety and industrial sectors can maintain contact over greater distances. Equipped with a standard SMA-F connector, it provides a secure and reliable fit for the F3400 and F7010 series handheld transceivers. Key Features VHF Frequency Range: Optimized for the 160-174 MHz band for clear, long-distance communication. Flexible Rubber Design: Built to bend and absorb impact, ensuring longevity in demanding work environments. 180 mm Length: The 7-inch profile provides the necessary height for high-gain performance and improved signal reach. SMA-F Connector: Ensures a precision, screw-on connection for stable electrical performance and signal integrity. Enhanced Gain: Specifically designed to improve signal quality and extend the operational range of the radio. Professional Grade Build: Engineered by Icom to meet the strict requirements of tactical and commercial radio users. Compatibility F3400D F3400DS F3400DT F7010S F7010T Benefits Superior Signal Reach: The high-gain design allows users to transmit and receive signals in areas where shorter antennas might fail. Improved Durability: The flexible material prevents the antenna from snapping or damaging the radio’s connector during physical activity. Enhanced Audio Clarity: By maximizing signal reception, the antenna helps reduce static and dropouts for more reliable voice communication. Secure Fitment: The dedicated SMA-F connector provides a tight seal to maintain the professional appearance and functionality of the radio. Warranty 1-year manufacturer's warranty

Read more less

Icom FAS81US Stay Discreet and Connected with the Icom FA-S81US Stubby Antenna Need a compact and reliable antenna for your Icom radio? The Icom FA-S81US is a UHF stubby antenna that delivers optimal performance without the bulk. Measuring just 2.4 inches long, this antenna is perfect for professionals who need a discreet communication solution. Here's why the FA-S81US is the smart choice: Compact Design: Minimizes bulk and provides a low profile, ideal for professionals on the move. Reliable Performance: Ensures clear communication in the 400-450MHz UHF frequency range. Durable Construction: Built to withstand the demands of daily use. Easy Installation: Features an SMA connector for quick and secure attachment to your compatible Icom radio. Compatible with these Icom radios: F4400D F4400DS F4400DT F7020S F7020T Warranty: 1-year manufacturer's warranty Enhance your communication experience with the Icom FA-S81US stubby antenna. Order yours today!

Read more less

Motorola PMAN5101A Covert Wi-Fi Antenna - On-Glass with QMA Extension The Motorola PMAN5101A is a discreet, covert Wi-Fi antenna designed for on-glass vehicular installations, including motorcycles. This antenna supports Wi-Fi 5GHz, ensuring seamless and reliable connectivity for your compatible Motorola APX series radios while on the move. This advanced vehicular installation solution does not include integrated GPS, focusing solely on providing robust Wi-Fi connectivity. The Motorola PMAN5101A is an essential component for integrating Wi-Fi capabilities into your mobile radio setup, ensuring consistent data transfer and communication. The Motorola PMAN5101A is the updated version of the Motorola PMAN5101. Key Features Covert Glass-Mount Design: Allows for discreet and unobtrusive installation on vehicle glass surfaces, ideal for motorcycles. Wi-Fi 5GHz Support: Ensures high-speed and reliable wireless data connectivity. For Vehicular Installations: Specifically designed for mobile environments, offering robust performance on the move. Does Not Include Integrated GPS: Focuses solely on Wi-Fi functionality without integrated GPS. QMA Extension: Provides a secure and reliable connection to your radio system. Wi-Fi Frequency Band: Operates within the dedicated Wi-Fi frequency spectrum. Compatibility APX1500 APX2500 APX4500 APX6500 APX7500 APX8500 Benefits Enhanced Mobile Connectivity: Provides seamless 5GHz Wi-Fi access for your radio while in a vehicle. Discreet Installation: Covert glass-mount design maintains vehicle aesthetics and avoids visible external antennas. Reliable Data Transfer: Ensures stable and efficient Wi-Fi signal reception for various applications. Optimized for Vehicular Use: Built to perform consistently in demanding mobile environments. Focused Functionality: Dedicated Wi-Fi antenna ensures clear signal acquisition for wireless data needs.   Warranty 1-year manufacturer's warranty

Read more less

Motorola PMAE4071A UHF Stubby Antenna | 470–527 MHz Compact, intrinsically safe UHF stubby antenna for Motorola R, XPR, DP, DEP, and ION series portables. The Motorola PMAE4071A is a compact UHF stubby antenna designed for Motorola portable two-way radios operating in the 470–527 MHz frequency range. At just 90 mm (9 cm) in length, it provides a low-profile alternative to standard whip antennas while maintaining reliable UHF performance. The PMAE4071A complies with FM/UL intrinsic safety standards for use in hazardous environments. This is the current revision, also referenced as PMAE4071. Key Features & Benefits UHF Frequency Range (470–527 MHz): Optimized for UHF communication across a broad range of Motorola portable radio platforms. Compact 90 mm Stubby Design: Low-profile form factor for unobtrusive, belt-worn use without compromising performance. Intrinsically Safe (FM/UL): Complies with FM/UL safety standards for use in hazardous locations. Broad Compatibility: Works across the R, XPR, DP, DEP, and ION series Motorola portable radio lineup. Durable Construction: Built for reliable performance in professional and industrial environments. Specifications Attribute Details Brand Motorola Model / SKU PMAE4071A (also PMAE4071) Product Type UHF Stubby Antenna Frequency Range 470–527 MHz (UHF) Length 90 mm (9 cm) Safety Rating FM/UL Intrinsically Safe Country of Origin China Compatibility Model Series R2, R5, R7 Motorola R Series XPR3300e, XPR3500e, XPR7350e, XPR7380e, XPR7550e, XPR7580e Motorola XPR Series DP2400e, DP2600e, DP3441e, DP3661e Motorola DP Series DEP550e, DEP570e Motorola DEP Series ION Motorola ION Series What's Included Description SKU/Model Status UHF Stubby Antenna PMAE4071A Included Compatible Portable Radio — Sold Separately Recommended Accessories Compatible Radios Motorola R2 Portable Two-Way Radio — Compatible R series radio for use with the PMAE4071A antenna. Motorola MOTOTRBO R5 Portable Two-Way Radio — Compatible R series radio for use with the PMAE4071A antenna. Motorola MOTOTRBO R7 Portable Two-Way Radio — Compatible R series radio for use with the PMAE4071A antenna. Related Antennas Motorola PMAE4070A UHF (440–490 MHz) Stubby Antenna — Alternative UHF stubby antenna for the R7 and compatible Motorola portables in the 440–490 MHz range. Frequently Asked Questions Is the PMAE4071A the same as the PMAE4071? Yes. The PMAE4071A is the current revision of the PMAE4071. Both part numbers refer to the same UHF stubby antenna for the 470–527 MHz frequency range. Is the PMAE4071A intrinsically safe? Yes. The PMAE4071A complies with FM/UL intrinsic safety standards, making it approved for use in hazardous locations where flammable gases, vapors, or dust may be present. What is the difference between a stubby antenna and a standard whip antenna? A stubby antenna is significantly shorter than a standard whip antenna, providing a lower-profile form factor that is less obtrusive during belt-worn use. The trade-off is a modest reduction in range compared to a full-length whip. The PMAE4071A is optimized to balance compactness with reliable UHF performance across compatible Motorola radios. Which Motorola radios are compatible with the PMAE4071A? The PMAE4071A is compatible with a broad range of Motorola portable radios across the R, XPR, DP, DEP, and ION series. Refer to the compatibility table above for the full confirmed model list. Warranty 1-year manufacturer's warranty.

Read more less

Mission Critical Wireless RSM Kit with Dual Charger (IP55) The Motorola RLN6554A is a complete Mission Critical Wireless (MCW) Remote Speaker Microphone (RSM) kit designed for demanding public safety and mission-critical environments. This wireless accessory cuts the cord, allowing users to operate their radio remotely up to 10 meters away, enhancing safety and mobility without the distraction of tangled wires. The Motorola RLN6554A is the updated version of the Motorola RLN6554. This kit provides a ready-to-use solution, including the wireless RSM, a removable high-capacity battery (PMNN4461), a clip, and a dual-unit desk charger. The RSM features enhanced security, quick-touch pairing with voice confirmation, and a rugged IP55 rating for protection against dust and splashing water. Its windporting microphone ensures clear audio, while the large, recessed PTT and emergency buttons prevent accidental activation. Key Features Mission Critical Wireless (MCW): Provides a secure, reliable Bluetooth connection (up to 10m) between the portable radio and the RSM, enhancing user safety and comfort. Complete Kit with Dual Charger: Supplied with the wireless RSM, a removable battery (PMNN4461), a clip, and a dual-unit desk charger for flexible, multi-shift operation. Rugged IP55 Rating: Protected against dust ingress and splashing water, guaranteeing reliable performance in harsh, demanding environments. Windporting Microphone: Designed to minimize background noise, ensuring clear and intelligible communication even in high-wind conditions. Enhanced Safety Design: Features a large, recessed Orange/Emergency button and PTT to ensure easy access while preventing accidental activation. Earpiece Support: Includes a non-threaded 3.5mm audio jack for connecting a receive-only earpiece for discreet listening. Compatibility APX1000 APX2000 APX3000 APX4000 APX5000 APX6000 APX6000 XE APX7000 APX7000XE APX8000 APX8000 XE SRX2200 DGM5000E DGM5500E DGM8000E DGM8500E Benefits Maximized Mobility and Safety: Eliminates the cord hazard, allowing personnel to work more freely and safely while maintaining PTT access. Multi-Shift Usage: The removable battery and dual-unit charger support continuous operation by allowing the user to swap out the battery. Superior Audio Clarity: The Windporting technology ensures the user's voice is heard over environmental noise, improving mission effectiveness. Streamlined Charging: The included dual-unit desk charger provides a centralized, efficient way to charge the RSM and spare battery.   Warranty 1-year manufacturer's warranty

Read more less

Hytera 12493-H The Hytera 12493-H is the metal base station cabinet for Hytera mobile two-way radio. The 12493-H is compatible with the Samlex SEC1223 power supply. This product does not come with the SEC1223 power supply. See DC-HM6XX for the Base Station Cabinet Kit that includes both. 12493-H COMPATIBILITY HM652 HM682 SEC1223 We are an authorized Hytera dealer.

Read more less

Motorola DSCP10725 (Untuned & Pre-Tuned) UHF (406-500 MHz) Mobile Duplexer  - Untuned or Customer Pre-Tuned Options The Motorola DSCP10725 UHF mobile duplexer operates in the 406-500 MHz frequency range, enabling simultaneous transmission and reception through a single antenna in repeater systems. Available in both an untuned option for flexible frequency customization and a pre-tuned variant configured to customer-specified frequencies upon purchase. Both versions feature N-female connectors and are recommended for repeater applications under 50 Watts in low-density RF environments. Proper tuning is required for untuned models (instructions included) to maintain the warranty. Key Features Wide UHF Range (406-500 MHz): Offers broad frequency coverage for various UHF communication needs. Untuned or Pre-Tuned Options: Provides flexibility for user customization or convenient out-of-the-box operation. Customer Pre-Tuning (Optional): Allows for factory pre-configuration to specific frequency spacing upon purchase. N-Female Connectors: Standard RF interface for easy integration with existing equipment. Single Antenna Operation: Enables simultaneous transmit and receive using one antenna, reducing complexity. Compatibility Compatible with most repeater applications under 50 Watts maximum output power. Benefits Simplified Setup: Enables repeater functionality with a single antenna. Flexible Frequency Options: Choose between user-defined tuning or convenient pre-configuration. Efficient Communication: Filters signals for clear and reliable simultaneous transmission and reception. Warranty 1-year manufacturer's warranty

Read more less

Replacement Battery Latch and Shaft for BPR40 The Motorola PMDN4023AR is a black replacement battery latch and shaft designed for the Motorola BPR40, BPR40D, and Alpha L radios. This genuine Motorola part ensures a secure battery connection and proper functionality. Key Features Color: Black Compatibility: Motorola BPR40, BPR40D, and Alpha L radios Genuine Motorola Part: Ensures proper fit and function Compatibility BPR40 BPR40D Alpha L Benefits Direct Replacement: Easy to install and replaces damaged or lost battery latches and shafts. Secure Battery Connection: Keeps the battery firmly in place. Warranty 1-year manufacturer's warranty

Read more less

Hytera BL2801-Ex UL913 Certified Intrinsically Safe Li-Ion Smart Battery - Extended Power for Hazardous Environments The Hytera BL2801-Ex (2850mAh) is a high-capacity, UL913 certified, Intrinsically Safe, LI-Ion battery specifically designed for portable two-way radios used in hazardous environments. This Smart battery provides a long operating time of 29 hours, ensuring reliable communication throughout extended shifts. Key Features Capacity: 2850mAh: Provides a substantial amount of power, allowing for extended use of the radio before needing to be recharged. Chemistry: LI-Ion: Utilizes Lithium-Ion technology, offering a high energy density, lightweight design, and a low self-discharge rate, making it a reliable and efficient power source. Safety Certification: UL913 certified, Intrinsically Safe: Certified to meet rigorous safety standards (UL913), ensuring safe operation in potentially explosive atmospheres. Type: Smart battery: Incorporates intelligent circuitry for optimized charging, discharging, and battery health monitoring, maximizing battery lifespan and performance. Operating Time: 29-hour: Delivers a long operating time, minimizing downtime and maximizing productivity, especially in demanding work environments. Compatibility HP702-G-BT-UL913 HP782-G-BT-UL913 Benefits Intrinsically Safe: Safe for use in hazardous environments. Long Operating Time: Provides extended power for prolonged use. Smart Battery: Offers advanced battery management features. Warranty 1-year manufacturer's warranty.

Read more less

Hytera BP4006  High-Capacity Lithium-Ion Battery for PoC Radios The Hytera BP4006 is a 3.85V lithium-ion polymer battery with a 4000mAh capacity, engineered to deliver reliable and long-lasting power for your radios. Compatible with PoC radios, this battery ensures optimal performance in professional and demanding environments. Key Features High Capacity (4000mAh): Provides extended operation time for uninterrupted communication. Lightweight Design: Combines power and portability, ensuring comfort during extended use. Durable Lithium-Ion Polymer: Advanced battery technology for reliable performance and safety. Wide Compatibility: Specifically designed for Hytera PoC radios. Compatibility PNC380S Benefits Long-Lasting Power: Keeps radios operational for longer periods, enhancing productivity. Reliable for Critical Use: Reduces downtime, making it ideal for industries like security, logistics, and field operations. Cost-Effective Replacement: Extends the lifespan of your Hytera devices with high-quality battery performance. Seamless Fit: Designed to perfectly integrate with compatible PoC radios.   Warranty 1-year manufacturer's warranty.

Read more less

Hytera SM26N3 Remote Speaker Microphone IP67-rated remote speaker microphone for Hytera PD7 and PD9 series portable radios. For PD702i, PD752i, PD782i, PD792i-Ex, and PD982i. The Hytera SM26N3 is an IP67-rated remote speaker microphone (RSM) designed for Hytera PD7 and PD9 series portable two-way radios. Its IP67 rating provides full protection against dust ingress and temporary water submersion, making it well-suited for demanding professional environments including public safety, industrial, and field service operations. The SM26N3 allows operators to monitor and transmit without raising the radio from a holster, improving situational awareness and communication efficiency. Key Features & Benefits IP67 Rated: Fully dust-tight and protected against temporary water submersion for reliable performance in harsh field conditions. Remote Speaker Microphone: Allows monitoring and PTT communication without removing the radio from a holster or case. Genuine Hytera OEM: Designed specifically for PD7 and PD9 series portables for a guaranteed fit and optimal audio performance. Professional Durability: Built to withstand the wear and exposure typical of public safety, industrial, and field service deployments. Specifications Attribute Details Brand Hytera Model / SKU SM26N3 Type Remote Speaker Microphone (RSM) Ingress Protection IP67 (Dust-Tight, Waterproof) Country of Origin China Compatibility Model Series PD702i, PD752i, PD782i Hytera PD7 Series PD792i-Ex Hytera PD7 Series (ATEX/IECEx) PD982i Hytera PD9 Series Warranty 1-year manufacturer’s warranty.

Read more less

High-Capacity Lithium-Ion Battery for Handheld Transceivers Extended operational runtime to keep your portable communication fleet fully powered. The Icom BP287 is a genuine OEM high-capacity rechargeable power source engineered specifically for professional portable transceivers and communications receivers. This lightweight power pack provides an exact mechanical fit, restoring original factory operating cycles for users needing an authentic Icom BP287 power setup. Ideal for dispatch administrators, emergency field personnel, and radio monitoring teams, this battery pack ensures your critical equipment remains operational during extended shifts. The Icom BP287 delivers a nominal 3.6V output with a high-capacity 3280mAh performance layout, allowing for long active scanning and transmission runtimes. It acts as a direct replacement for worn-out original cells or as an essential backup unit for continuous multi-shift service. To preserve the original dust-tight and submersible water protection of your radio device, this battery must be completely seated and locked into the rear frame. Please note that charging requires a compatible desktop rapid drop-in cradle or a direct cable utility connection, which are sold separately from this standalone Icom BP287 component. Key Features & Benefits Genuine OEM Component: Designed directly by the manufacturer to guarantee flawless electrical alignment and seamless terminal connectivity. High Capacity Storage: Outfitted with a typical 3280mAh rating to provide long-lasting power during intensive scanning deployments. Optimized Power Delivery: Incorporates authentic Icom BP287 cells to deliver a stable, reliable 3.6V current with zero memory effect. Submersible Environmental Protection: Fully maintains the native dust-tight and waterproof ratings of your companion hardware when securely latched to the chassis. Fleet Readiness Backup: Serves as an ideal replacement pack or an indispensable secondary cell to eliminate communication downtime. Specifications Attribute Details Brand Icom Model/SKU BP287 Battery Chemistry Lithium-Ion (Li-Ion) Voltage 3.6 V Capacity 3280 mAh (Typical) / 3120 mAh (Minimum) Compatibility R15 R30 Recommended Accessories Icom LC189 Carrying Case for R30 – Precision-molded protective vinyl casing designed to fit your handheld receiver securely. Icom SP40 Listen-Only Earpiece with 3.5mm Plug – Listen-only single earphone providing clear, private incoming audio in loud settings. More Resources Can a Bad Battery Cause Radio Problems? Symptoms and Simple Fixes Can You Charge a Radio Battery Without a Charger? Safe Options and Risks Explained Frequently Asked Questions What is the cell chemistry and technical capacity of this battery pack? This battery pack is manufactured using advanced premium lithium-ion cell chemistry, providing a nominal operating voltage of 3.6V and a high typical storage capacity of 3280mAh. Does this battery pack maintain the water-resistance of the radio? Yes. The complete dust-tight and submersible water-resistant environmental protection ratings are fully maintained only when the battery pack is properly seated and completely latched onto the radio chassis. Can I charge this battery pack without a multi-unit docking station? Yes. When attached to compatible portable hardware that supports standalone internal USB interface connections, you can recharge the battery pack directly via an approved micro-USB or type-C cable line. Is it safe to store this lithium-ion pack completely depleted? No. To prevent overall cell capacity degradation and maximize life cycles, do not store lithium-ion batteries entirely discharged. Keep them at roughly forty to fifty percent capacity during long periods of storage. Does this product include the alignment belt clip or desktop dock? No. This product includes only the single rechargeable battery pack. Physical spring belt clips, rapid desktop chargers, wall adapters, and charging cables are sold separately. Will this battery pack fit standard commercial land mobile transceivers? This specialized battery chassis is engineered to slide into precise land mobile, amateur, and marine series handheld configurations, including the M85 and ID52A series models listed on the compatibility breakdown.   Warranty 1-year manufacturer’s warranty.

Read more less

Receive Only Extra Loud Earpiece - 3.5mm Jack The Motorola PMLN8652A is a receive-only D-shell earpiece designed for professional environments where clear and discreet communication is essential. This ergonomic earpiece provides a secure and comfortable fit for extended use, ensuring you can monitor communications without drawing attention. The Motorola PMLN8652A is the updated version of the Motorola PMLN8652. This receive-only earpiece features a 3.5mm plug, making it universally compatible with all remote speaker microphones and public safety microphones that have a 3.5mm audio jack. The Motorola PMLN8652A delivers reliable, clear incoming communication, even in noisy conditions, and is built to withstand the rigors of daily use. Key Features Receive-Only D-Shell Earpiece: Provides a secure and comfortable fit for discreet listening. 3.5mm Plug: Ensures compatibility with all remote speaker microphones that have a 3.5mm audio jack. Ergonomic Design: The D-shell shape provides a comfortable and stable fit for extended use. Enhanced Audio Clarity: Delivers reliable, clear incoming communication, which is crucial in noisy conditions. Rugged and Durable: Built to withstand daily wear and tear in demanding professional settings. Compatibility RSMs XVP850 XVP830 XVP750 XVP730 Radios APX1000 APX1000i APX2000 APX3000 APX4000 APX4000XH APX5000 APX6000 APX6000Li APX6000XE APX8000 APX8000H APX8000HXE APX8000XE APX8500 APX900 APXN30 APXN50 APXN70 APXN70XE APXNEXTEnhanced APXNEXTMultiBand APXNEXTSingleBand APXNEXTSingleBand(International) APXNEXTXEMultiBand APXNEXTXESingleBand APXNEXTXNAllBand APXNEXTXNSingleBand R5 SRX2200 Benefits Discreet Communication: The receive-only D-shell design is ideal for private and unobtrusive listening in professional environments. Comfortable for Extended Use: The ergonomic design provides a secure and comfortable fit, even during long shifts. Enhanced Audio Clarity: Ensures clear and reliable incoming communication, which is crucial in noisy conditions. Universal Compatibility: Works with all remote speaker microphones that feature a 3.5mm audio jack. Durable and Reliable: Built to withstand daily wear and tear in demanding settings, providing long-lasting performance.   Warranty 1-year manufacturer's warranty

Read more less

MOTOTRBO™ Digital/Analog Mobile Radio with Alphanumeric Display Advanced Vehicle Communication with 99-Channel Capacity The Motorola CM300d is a MOTOTRBO™ mobile radio designed for organizations that require more than basic channel capacity and status information. Featuring a high-contrast alphanumeric display, the CM300d allows operators to see caller ID, channel names, and menu functions clearly, ensuring efficient navigation and professional fleet management. This rugged vehicle-mounted unit operates in both digital (DMR) and analog modes, providing a seamless, cost-effective path to digital migration at your own pace. Available in UHF (403–470 MHz) and VHF (136–174 MHz) with power options of 25W or 45W, the CM300d is engineered to deliver superior coverage and audio clarity in challenging environments. By utilizing TDMA digital technology, it offers twice the calling capacity of standard analog systems and includes business-essential features like Transmit Interrupt (Decode), allowing critical instructions to be prioritized over ongoing conversations. With 99 channels, it provides the flexibility needed to organize complex workgroups across large-scale industrial or municipal operations. Built to IP54 standards, the CM300d is resistant to dust and water splashes, ensuring long-term reliability in vehicle cabins. It includes Voice Announcement for audible channel confirmation and Basic Privacy for secure digital communications. Whether managing a logistics fleet or coordinating school bus routes, the Motorola CM300d provides the operations-critical performance required for modern safety and productivity. Key Features & Benefits Alphanumeric Display: Clear text display for caller identification, channel names, and status updates to improve operator awareness. 99-Channel Capacity: Ample memory for large fleets or multi-departmental organizations requiring diverse talk groups. Dual Mode Operation: Supports both digital (DMR) and analog modes to ensure interoperability with legacy radio systems. Superior Audio Quality: Digital voice processing ensures clear communication in noisy vehicle environments. Dual Capacity Direct Mode: Doubles calling capacity on your existing 12.5 kHz channel without the need for a repeater. Rugged IP54 Construction: Designed to withstand the vibration, shock, and environmental conditions of mobile installations. Voice Announcement: Audible channel confirmation keeps operators informed without looking at the display. Specifications Attribute Details Frequency Bands UHF (403–470 MHz) or VHF (136–174 MHz) Power Output 25W or 45W Channel Capacity 99 Channels Display Alphanumeric (Text/Numeric) Ingress Protection IP54 Technology MOTOTRBO™ Digital (DMR) & Analog Dimensions 1.73" × 6.67" × 5.30" Weight 2.9 lbs Warranty 2-Year on radio, 1-Year on accessories Model Variations Band Power Mode SKU UHF (403–470 MHz) 25W Analog Only AAM01JNH9JC1AN UHF (403–470 MHz) 25W Digital & Analog AAM01JNH9JA1AN UHF (403–470 MHz) 45W Analog Only AAM01JQH9JC1AN UHF (403–470 MHz) 45W Digital & Analog AAM01JQH9JA1AN VHF (136–174 MHz) 25W Analog Only AAM01QNH9JC1AN VHF (136–174 MHz) 25W Digital & Analog AAM01QNH9JA1AN VHF (136–174 MHz) 45W Analog Only AAM01QPH9JC1AN VHF (136–174 MHz) 45W Digital & Analog AAM01QPH9JA1AN What's Included Description SKU/Model Status Motorola CM300d Mobile Radio CM300d Included Standard Compact Microphone PMMN4090 Included Low-Profile Mounting Bracket RLN6469 Included 10-Foot Power Cable HKN4137 Included Recommended Accessories Motorola PMMN4098A Desktop Mobile Microphone – Desktop-style microphone for base station or dispatch use with the CM300d. Samlex SEC1223 Desktop Power Supply – AC-to-DC power supply for using the CM300d as a desktop or base station radio. PCTEL RGPLI Magnetic Mount Antenna – Magnetic base antenna mount for quick, no-drill vehicle installation. Motorola HAE4003A UHF Antenna (450–470 MHz) – Through-hole mount 1/4-wave antenna for UHF CM300d installations. Motorola HAD4022A VHF Antenna (136–174 MHz) – Through-hole mount antenna for VHF CM300d installations. Mini UHF Male Crimp Connector MINI-U-M-RG58 – Crimp connector for terminating RG58 coax cable to the CM300d antenna port. Motorola HKVN4223A Digital (DMR) Upgrade License – Unlocks digital DMR operation on analog-only CM300d models. More Resources How to Connect a Radio to a Battery Safely — Car and Mobile Install Basics Frequently Asked Questions Does the Motorola CM300d need to be programmed? Yes, the CM300d must be programmed with your licensed frequencies before use. You'll be asked at checkout whether you'd like programming, or you can add it in advance via our Atlantic Radio Programming Services page. To program it yourself, you'll need the Motorola CPS software and the PMKN4147A USB programming cable, sold separately. What is the difference between the CM300d and the CM200d? The CM300d features an alphanumeric display and 99 channels, whereas the CM200d has a 1-digit numeric display and 16 channels. The CM300d is the better choice for larger fleets or operations requiring channel name visibility and caller ID. What is the difference between the analog-only and digital/analog models? Analog-only models (SKUs ending in JC1AN) operate exclusively on analog frequencies. Digital/analog models (SKUs ending in JA1AN) support both DMR digital and analog operation out of the box. Analog-only models can be upgraded to digital operation with the HKVN4223A Digital Upgrade License. Is the CM300d Narrowbanding compliant? Yes, the CM300d fully complies with FCC narrowbanding requirements for 12.5 kHz efficiency. Does it support private calling? Yes, the digital mode includes Basic Privacy and the ability to identify specific callers via the alphanumeric display. Can I use this radio as a desktop base station? Yes. By adding the Samlex SEC1223 desktop power supply, you can use the CM300d as a dispatch base station without a vehicle power connection. Warranty The Motorola CM300d includes a 2-year manufacturer's warranty on the radio and a 1-year warranty on included accessories. Please contact Atlantic Radio Communications for warranty claims, support, or replacement inquiries.

Read more less

Hytera HYT-11530000000198 Replacement Front Cover for PD702i Two-Way Radio The Hytera HYT-11530000000198 is a replacement front cover designed specifically for the PD702i portable two-way radio. This component is essential for restoring the radio's exterior, ensuring both functionality and aesthetic integrity. Manufacturer's description: PD700 Front case kit of radio unit (RoHS)&150PD70000000 Key Features OEM Quality: Manufactured by Hytera to meet original equipment standards. Durable Construction: Built to withstand the rigors of daily use in demanding environments. Precise Fit: Engineered to seamlessly integrate with the PD702i model. Benefits Restores Functionality: Replaces damaged or worn front covers, maintaining the radio's performance. Maintains Appearance: Preserves the radio's professional look and feel. Cost-Effective Solution: Provides an affordable alternative to purchasing a new unit.   Compatibility Model: Hytera PD702i   Warranty 1-year manufacturer's warranty.

Read more less

Motorola PMNN4530A The Motorola PMNN4530A is a lithium ion battery with 3700mAh for the Si300, Si500 and Si700 body cameras. This battery has a heavy-duty design that has 21 hours of usage time. *6 month manufacture's warranty on this battery.

Read more less

XVP850 IMPRES Remote Speaker Microphone with Channel Knob (IP68, TAA) The Motorola PMMN4135BTAA (XVP850) is a next-generation, mission-critical Remote Speaker Microphone (RSM) designed to meet TAA compliance requirements for U.S. government and federal use. This ultimate RSM is built with an extremely rugged IP68 submersible rating and TIA4950 (UL) Intrinsically Safe (HazLoc) certification, providing superior safety and functionality. Equipped with the same Adaptive Audio Engine as APX NEXT, the XVP850 features a multi-mic arrangement of four HDR microphones that filter noise with superior clarity, regardless of how the user holds the mic. This model includes an integrated channel knob, volume control, and a dedicated ViQi button (for APX NEXT) for enhanced functionality in the field. Key Features TAA and HazLoc Certified: Complies with the Trade Agreements Act (TAA) and is TIA4950 (UL) certified, making it safe and compliant for federal and hazardous location use. Integrated Channel Knob: Features a dedicated channel selector knob, allowing users to switch channels directly from the RSM. Adaptive Audio Engine (4-Mic Array): Utilizes a four-microphone system and sophisticated algorithms to track the user's voice and filter out surrounding noise with superior clarity. Extreme IP68 Submersible Rating: Offers the highest level of protection, guaranteeing the mic is fully functional after continuous water immersion. Integrated Controls: Includes volume control, an Orange Emergency Button, and multiple programmable buttons for enhanced operational efficiency. ViQi Voice Control Button: Features a dedicated ViQi button (on APX NEXT) to enable voice commands directly from the RSM. Compatibility APX6000 APX6000 XE APX8000 APX8000H APX8000HXE APX8000XE APX NEXT SRX2200 APX NEXT INTL FED APX NEXT XE MULTI APX NEXT XN SINGLE BAND Benefits Superior Noise Suppression: The multi-mic array delivers mission-critical communications by ensuring crystal-clear voice transmission over extreme background noise. Guaranteed Safety and Compliance: IP68 and TIA4950 certification ensure the mic is safe and operable in explosive environments, meeting federal sourcing laws. Enhanced Field Control: Integrated channel knob and volume control allow the user to make essential adjustments without reaching for the radio unit. Future-Ready Technology: Adaptive Audio Engine capabilities prepare the mic for future intelligence and audio updates, maximizing its service life.   Warranty 1-year manufacturer's warranty

Read more less

2-Wire Surveillance Kit with Adaptive Audio The Motorola PMLN6127A is a black, 2-wire over-the-ear surveillance kit designed for discreet communication. This kit features an earpiece on one wire and a microphone with a push-to-talk (PTT) button on the other. The IMPRES™ technology provides adaptive audio, ensuring clear communication in both loud and quiet environments. Key Features Design: 2-wire surveillance kit with over-the-ear earpiece Microphone: In-line microphone PTT: In-line PTT button Audio: IMPRES™ adaptive audio for clear communication Color: Black Dimensions: 0.75" (W) x 2.25" (H) x 1.25" (L) Compatibility APX2000 APX5000 XPR7550E XPR7580E XPR7580 DGP4100 DGP5050E DGP5550E DGP6100 DGP8550E DP3000 DP4400 DP4400E DP4401 DP4401E DP4401ESMA DP4600 DP4600E DP4601 DP4601E DP4800 DP4800E DP4801 DP4801E DP4801ESMA XPR6100 XPR6350 XPR6380 XPR6550 XPR6580 XPR7350 XPR7350E XPR7380 XPR7380E XPR7550 Benefits Discreet Communication: Ideal for surveillance and covert operations. Clear Audio: IMPRES™ adaptive audio ensures clear communication in various environments. Versatile: Can be used with the microphone fastened to the uniform or held directly in front of the mouth. Comfortable: Over-the-ear design provides a comfortable and secure fit.   Warranty 1-year manufacturer's warranty.

Read more less

TLK110 LTE Antenna (North America) Optimized Cellular Connectivity for WAVE™ PTX Portables The Motorola HKAN4005A is a high-performance LTE antenna specifically engineered for the TLK110 portable radio to ensure reliable wide-area network coverage. As a critical component of the WAVE™ PTX ecosystem, this antenna is tuned for the specific cellular frequency bands utilized across North America. The Motorola HKAN4005 provides the high-gain stability required for instantaneous push-to-talk communication, ensuring that mobile teams remain connected even in challenging RF environments or fringe coverage areas. Designed with a focus on both durability and signal integrity, the Motorola HKAN4005 features a ruggedized outer jacket that stands up to the mechanical stress of daily industrial use. Its compact "stubby" profile maintains the streamlined ergonomics of the TLK110, preventing snags on clothing or equipment while the radio is worn on a belt or tactical vest. This antenna is an essential OEM replacement for maintaining the mission-critical cellular performance and data throughput that professional users expect from the Motorola TLK series. Key Features & Benefits LTE Band Optimization: Precision-tuned for North American cellular frequencies to ensure the fastest possible network latch times and clear audio. Streamlined Form Factor: The stubby design provides a low-profile aesthetic that enhances portability and prevents the antenna from bending or catching on obstacles. High-Integrity Connection: Features a secure mounting interface designed specifically for the TLK110 chassis to prevent signal loss or accidental detachment. Durable Construction: Built with impact-resistant materials capable of withstanding the vibrations and drops common in field-service and security work. Enhanced Performance: Designed to provide stable signal gain, which is vital for maintaining high-quality voice-over-IP (VoIP) transmissions. OEM Factory Grade: A genuine Motorola replacement part that guarantees 100% compatibility and maintains the radio's original performance specifications. Specifications Feature Specification Frequency Band LTE (North America) Type Stubby Antenna Application Cellular Network Connectivity Mounting Style TLK Series Specific Color Black Compatibility TLK110 Recommended Accessories Motorola WAVE™ PTX Portable Radio (TLK110) Motorola TLK110 Replacement Battery (PMNN4804A) Motorola TLK110 Carry Holster (PMLN8434A) Frequently Asked Questions Can I use this antenna on my TLK100? No. The HKAN4005 is specifically designed for the TLK110. For the TLK100, you should use the HKAN4002 or the standard whip antenna designated for that model. Does this antenna improve Wi-Fi signal? No. This antenna is dedicated to the LTE cellular bands. Wi-Fi performance is handled by an internal antenna within the TLK110 radio chassis. Is it easy to install? Yes. This antenna threads directly onto the radio. It should be tightened firmly by hand to ensure a proper seal against dust and moisture. Warranty 1-year manufacturer's warranty.

Read more less

XVP830 IMPRES Remote Speaker Microphone (No Knob, IP68, HazLoc) The Motorola PMMN4136B (XVP830) is a next-generation, mission-critical Remote Speaker Microphone (RSM) designed for use in the most demanding and hazardous environments. Built with a rugged IP68 rating and TIA4950 (UL) Intrinsically Safe (HazLoc) certification, this RSM provides dependable communication where safety is paramount. The Motorola PMMN4136B is the updated version of the Motorola PMMN4136A and Motorola PMMN4136. The XVP830 is engineered with the same Adaptive Audio Engine capabilities as the APX NEXT radio, featuring a multi-mic arrangement of four HDR microphones for superior noise suppression and intelligibility. It includes a loud speaker, multiple programmable buttons, and is compatible with both APX and APX NEXT series radios. Note that this specific model is supplied without a channel selector knob. Key Features Extreme IP68 and HazLoc Rating: Fully submersible (IP68) and TIA4950 (UL) certified, making it safe for use in hazardous locations where flammable gases may be present. Adaptive Audio Engine (Multi-Mic): Features an arrangement of four High Dynamic Range (HDR) microphones for advanced noise suppression and voice clarity. Loud Speaker Output: Provides powerful, amplified audio to ensure transmissions are clearly heard over extreme ambient noise. Integrated Controls: Includes integrated volume control, a programmable Orange Emergency Button, and multiple other programmable buttons for enhanced functionality. APX NEXT ViQi Button Ready: Supports the ViQi push-button feature (for APX NEXT radios), allowing for quick access to intelligence/voice commands. IMPRES Technology: Optimizes audio performance and manages charging/battery life (when used within the IMPRES system). Compatibility APX2000 APX6000 APX6000 XE APX8000 APX8000H APX8000XE APXNEXT SRX2200 Benefits Superior Noise Suppression: The four-mic array ensures crystal-clear voice transmission by isolating the user's voice from extreme background noise. Guaranteed Safety Compliance: HazLoc certification allows the mic to be used safely in explosive industrial and public safety environments. Maximum Durability: IP68 rating ensures the mic remains fully functional despite submersion, rain, or severe dust exposure. Enhanced Worker Functionality: Programmable buttons and integrated volume control maximize operational efficiency and safety directly from the mic.   Warranty 1-year manufacturer's warranty

Read more less

Motorola PMMN4062AL IMPRES Noise-Cancelling Remote Speaker Microphone IMPRES™ Audio noise-cancelling RSM for Motorola APX and SRX2200 series portables. IP54, CSA intrinsically safe, orange emergency button. Superior audio clarity in high-noise environments. The Motorola PMMN4062AL is a remote speaker microphone with IMPRES™ Audio noise-cancelling technology for Motorola APX and SRX2200 series radios. Designed for demanding environments, it delivers clear voice transmission and reception by minimizing background noise. With an IP54 ingress protection rating and CSA intrinsic safety certification, it is suited for hazardous location use. Rugged construction and an ergonomic form factor make it suited for all-day wear in public safety, security, and industrial applications. Key Features & Benefits IMPRES™ Audio Noise Cancellation: Advanced audio processing filters out background noise for clear, intelligible transmission in loud or chaotic conditions. Enhanced Audio Quality: IMPRES technology optimizes audio performance for clarity and intelligibility at both ends of the call. IP54 Rated: Protected against dust ingress and water splash from any direction for reliable performance in field conditions. CSA Intrinsically Safe: CSA-certified for safe operation in hazardous locations where flammable gases or vapors may be present. Orange Emergency Button: Dedicated programmable orange/emergency button for rapid activation of emergency functions without fumbling for controls. 3.5mm Audio Jack: Non-threaded 3.5mm accessory jack for compatible earpieces and headsets. Ergonomic Design: Comfortable form factor for secure, all-day wear without fatigue. Easy PTT Access: Large, tactile push-to-talk button for quick, reliable activation. Rugged Construction: Built to withstand the physical demands of daily use in challenging field environments. Specifications Attribute Details Brand Motorola Solutions Model / SKU PMMN4062AL Replaces PMMN4062A Type Remote Speaker Microphone (RSM) Audio Technology IMPRES™ Noise-Cancelling Microphone Type Noise-Canceling Audio Jack 3.5mm Non-Threaded IP Rating IP54 Intrinsic Safety Rating CSA Programmable Button Orange / Emergency Button Only Display No Display Channel Control No Volume Control No Country of Origin Malaysia Compatibility Model Series APX1000, APX2000, APX3000, APX4000 Motorola APX Series APX6000, APX6000XE, APX7000, APX7000XE Motorola APX Series APX8000, APX8000XE Motorola APX Series SRX2200 Motorola SRX Series Recommended Accessories Motorola PMMN4069AL IMPRES Windporting Remote Speaker Microphone — IMPRES RSM with windporting design for additional audio clarity in outdoor and windy conditions. Motorola RLN6554A Mission Critical Wireless RSM Kit — Wireless remote speaker microphone kit with dual charger for hands-free APX operation. Motorola NNTN8860B IMPRES 2 Single-Unit Battery Charger for APX Series — IMPRES 2 single-unit charger for APX series radio batteries. Frequently Asked Questions What does the PMMN4062AL replace? The PMMN4062AL is the current revision and is a direct drop-in replacement for the PMMN4062A. It is compatible with the same APX and SRX2200 series radios and retains the same connector, features, and CSA intrinsic safety rating. What is IMPRES Audio and how does it improve communication? IMPRES™ Audio is Motorola’s intelligent audio processing technology that automatically optimizes microphone sensitivity and speaker output based on ambient noise conditions. On the PMMN4062AL, it actively cancels background noise during transmission so your voice is heard clearly even in high-noise environments such as emergency scenes, industrial floors, or crowded public spaces. Is the PMMN4062AL intrinsically safe? Yes. The PMMN4062AL carries a CSA intrinsic safety rating, certifying it for use in hazardous locations where flammable gases or vapors may be present. It also carries an IP54 rating for dust and water splash resistance. Always verify that the complete radio system — including the host radio — meets the required IS certifications for your specific hazardous location classification before deployment. Is this RSM compatible with all APX radios? The PMMN4062AL is compatible with the APX1000, APX2000, APX3000, APX4000, APX6000, APX6000XE, APX7000, APX7000XE, APX8000, APX8000XE, and SRX2200. If you are unsure whether your specific APX model is supported, please contact us before purchasing. Warranty 1-year manufacturer’s warranty.

Read more less

Desktop Tray with Speaker for MOTOTRBO Mobile Radios The Motorola GLN7326A is a desktop tray with an integrated speaker, designed to convert compatible MOTOTRBO mobile radios into a fixed desktop or dispatch station. By securely holding the radio in place and amplifying incoming audio, it provides a reliable, hands-free communication solution for control rooms, dispatch centers, and office environments. The built-in speaker delivers increased volume over the radio's internal speaker, ensuring transmissions are heard clearly even in noisy environments. Compatible with a range of MOTOTRBO CM, DM, DEM, GM, MTM, and PRO series mobile radios. Key Features & Benefits Integrated Speaker: Amplifies incoming audio beyond the radio's built-in speaker for improved clarity in high-noise environments. Secure Desktop Mounting: Holds the radio firmly in place for stable, hands-free operation at a fixed workstation. Dispatch-Ready: Ideal for control rooms, dispatch stations, and office environments requiring a permanent radio setup. Broad Compatibility: Supports a range of MOTOTRBO CM, DM, DEM, GM, MTM, and PRO series mobile radios. Simple Installation: No tools required — radio slides into the tray for immediate use. Specifications Brand Motorola Solutions Model GLN7326A Type Desktop Tray with Integrated Speaker Application Fixed Desktop / Dispatch Station Compatibility Motorola CM200d Motorola CM300d Motorola DEM300 Motorola DEM400 Motorola DME1400 Motorola DM1600 Motorola DM2600 Motorola GM340 Motorola GM380 Motorola MTM800E Motorola PRO3100 Motorola PRO5100 Motorola PRO7100 What's Included Description SKU Status GLN7326A Desktop Tray with Speaker GLN7326A Included Frequently Asked Questions Does the GLN7326A work as a charger for the radio? No. The GLN7326A is a desktop tray with a speaker only — it does not charge the radio. A separate power supply or charger is required to power the radio while in the tray. Does the GLN7326A replace the radio's internal speaker? The GLN7326A's integrated speaker supplements the radio's internal speaker, providing increased volume and improved audio clarity when the radio is seated in the tray. Can I use a microphone with the radio while it is in the tray? Yes. The radio remains fully accessible while seated in the tray, allowing you to connect a palm microphone, remote speaker microphone, or other accessories as needed. Is the GLN7326A compatible with XPR series radios? The GLN7326A is not compatible with XPR series radios. Please refer to the compatibility list above for the full list of supported models, or contact Atlantic Radio to confirm compatibility with your specific radio. Warranty The Motorola GLN7326A is covered by Motorola Solutions' standard accessory warranty. Please contact Atlantic Radio Communications for warranty claims, support, or replacement inquiries.

Read more less

Icom MB86 Swivel Belt Clip - Secure and Rotatable Carrying Solution The Icom MB86 is a durable swivel belt clip designed to securely attach your two-way radio to your belt. This essential accessory screws directly into the back of the radio, providing a robust and stable connection. Its rotatable design offers flexibility, allowing you to position your radio for optimal comfort and easy access, whether you're standing, sitting, or engaging in various activities. Crafted for reliable performance, the Icom MB86 ensures that your radio stays firmly in place, preventing accidental drops and keeping it readily available for communication. This clip is an ideal solution for professionals who need to maintain hands-free operation while ensuring their radio is always within reach. Key Features Swivel Design: Allows the radio to rotate 360 degrees, providing multiple carrying angles for comfort and accessibility. Screw-In Attachment: Ensures a secure and stable connection to the back of the radio, minimizing the risk of accidental detachment. Durable Construction: Built to withstand the rigors of daily professional use, offering long-lasting reliability. Compact and Discreet: Its streamlined design ensures it does not add excessive bulk to your radio, maintaining a low profile. Compatibility GM1600 GM1600 Export M73 Benefits Enhanced Accessibility: The rotatable feature allows for quick and easy access to your radio from any angle, improving response time. Secure Carrying: Provides a firm and reliable attachment to your belt, preventing drops and protecting your valuable equipment. Increased Comfort: Adjust the radio's position to suit your activity, reducing discomfort during extended wear. Hands-Free Operation: Keeps your hands free for tasks, improving productivity and safety in various work environments.   Warranty 1-year manufacturer's warranty

Read more less

Motorola HLN6602A Universal Chest Pack for Radios The Motorola HLN6602A is a versatile universal chest pack designed to protect your radio while providing hands-free convenience during standby communication. This durable pack fits virtually any radio, making it an essential accessory for professionals in active environments. It features a pen holder and a Velcro-secured pouch for added utility, ensuring you stay organized and focused on the job. Motorola HLN6602A Key Features Universal Fit: Accommodates virtually any two-way radio securely. Hands-Free Operation: Keeps your radio protected while freeing up your hands. Added Storage: Includes a pen holder and a Velcro-secured pouch for small essentials. Durable Design: Built to withstand rigorous use in professional settings. Motorola HLN6602A Benefits Convenient Portability: Ensures easy access to your radio without the need to hold it. Professional Utility: Ideal for professionals requiring secure and accessible communication tools. Motorola HLN6602A CompatibilityThe Motorola HLN6602A fits most Motorola two-way radios and is compatible with other brands offering similarly sized radios. Motorola HLN6602A Warranty *1-Year Manufacturer’s Warranty

Read more less

Remote Control Command Microphone Handset for Digital Mobile Radios Fleet Cab Remote Control Solutions Manage your vehicle's entire mobile communication network directly from a secondary handheld station. The Icom HM218 Command Microphone is a genuine original equipment manufacturer (OEM) remote control microphone handset engineered for professional land mobile radio transceivers. By connecting directly to compatible mobile bases, the Icom HM218 provides comprehensive remote access to all radio menu settings, operating parameters, and channel configurations. This advanced accessory acts as a complete secondary control head, featuring a high-resolution color LCD display that enhances visibility under both bright natural sunlight and dark ambient conditions via an integrated night mode setting. Specially engineered for public safety command vehicles, fire apparatus, and administrative security fleets, the Icom HM218 solves the physical layout constraints found inside modern compact vehicular cabs. When space limitations require the primary mobile transceiver chassis to be mounted remotely under a seat or inside a trunk compartment, the Icom HM218 brings full tactical control directly to the operator's hand. This remote setup shields the main radio deck from accidental impacts, cabin dust accumulation, and liquid exposure while ensuring your communication interface remains within immediate reach. To establish field deployment readiness, operators must combine the Icom HM218 with a compatible remote mounting separation kit and dedicated separation cable. The ruggedized handset housing is built to perform reliably across extreme operational temperatures ranging from -30℃ to +60℃ and carries a certified IP55 weather-resistance rating to protect against dust ingress and low-pressure water streams. It also features a powerful built-in speaker that outputs a loud, clear 1.0 watt of typical audio power to comfortably overcome heavy engine roar, road noise, and sirens. Key Features & Benefits Full Transceiver Command Control: Replicates system menus, channels, call lists, and parameter configurations directly on the high-resolution color handheld screen interface of the Icom HM218. High-Output 1.0W Built-In Speaker: Delivers optimized 1.0-watt audio power output with a minimal 5% distortion profile to cut through noisy vehicular cabins. IP55 Weather Resistant Protection: Enclosed in a ruggedized outer shell sealed tightly against harmful dust accumulation and low-pressure water splashes from any angle. Extended Temperature Thresholds: Engineered to perform flawlessly through extreme field environments ranging from freezing cold down to -30℃ up to intense heat of +60℃. Ergonomic Low-Profile Design: Features a slim 27-millimeter depth profile that sits comfortably in the operator's hand for quick and effortless multi-shift deployment. Specifications Attribute Details Brand Icom Model/SKU Icom HM218 Product Type Command Microphone Audio Power Output 1.0 W Typical (@ 5% Distortion with 12 Ω) IP Rating IP55 Operating Temperature -30℃ to +60℃ Dimensions 60 x 145 x 27 mm (W x H x D) Weight 260 grams Color Black Compatibility F5400D F6400D F7510 F7520 F7540 What's Included Description SKU/Model Status Remote Control COMMANDMIC Handset Icom HM218 ✅ Included Mobile Two-Way Radio Transceiver — ❌ Sold Separately Remote Separation Mounting Kit RMK-5 / RMK-7 ❌ Sold Separately Separation Control Cable OPC-2364 / OPC-2374 ❌ Sold Separately Recommended Accessories Icom F5400D VHF Mobile Two-Way Radio (F5400D) — The primary digital mobile VHF transceiver engineered to natively host and interface with this remote control handset. Icom F6400D UHF Mobile Two-Way Radio (F6400D) — The primary digital mobile UHF transceiver engineered to natively host and interface with this remote control handset. Remote Control Hub (RMK5) Separation Cable (OPC2373 / OPC2374) More Resources Icom H218 Manual What Is a Two-Way Radio System? Components, Types, and Use Cases Frequently Asked Questions Does the Icom HM218 feature a built-in display screen? Yes. The Icom HM218 is equipped with a high-resolution color LCD screen and an updated user interface that mirrors the menus, icons, and call lists of the main radio. It also includes a selectable night mode setting to optimize readability in low-light environments. Does this command microphone require a separation cable to function? Yes. The Icom HM218 requires a dedicated Icom separation cable (such as the OPC-2364 or OPC-2374 series) and a compatible remote mounting kit to establish a secure data and power connection with the remotely mounted mobile radio chassis. Can I use this handheld device as a secondary head in a dual-control setup? Yes. When paired with an optional dual-head adapter configuration (such as the RMK-7 system), the Icom HM218 can serve as a fully functional secondary control station, which is an ideal configuration for fire apparatus, ambulances, and mobile command posts.   Warranty 1-year manufacturer's warranty.

Read more less

Motorola PMKN4148 Streamlined Programming Solution for Motorola Radios The Motorola PMKN4148 is a USB programming cable designed for fast and efficient programming of compatible Motorola radios. Ideal for technicians and users seeking a reliable connection for configuration and updates. Key Features Fast Data Transfer: Enables quick and seamless radio programming. USB Connectivity: Simple plug-and-play design for ease of use. Durable Construction: Built to withstand repeated use in various environments. Compact Design: Easy to carry and store, ideal for field or office use. Compatibility CM300d XPR5350e XPR5550e XPR7350e XPR2500e CM200 CM200d CM300 XPR7380e XPR7550e XPR7580e MOTOTRBO Ion Benefits Ease of Use: Simplifies programming tasks with its user-friendly USB interface. Time-Saving Solution: Speeds up configuration and updates for Motorola radios. Highly Durable: Built to last, even in challenging conditions. Portable Design: Compact size makes it ideal for on-the-go professionals. Warranty 1-year manufacturer’s warranty.

Read more less

Icom IC-V86  Versatile Transceiver with 7W Output The Icom V86 is a powerful and durable handheld VHF transceiver, designed to meet the needs of amateur radio users and professionals alike. With a 7 watt RF output, it delivers enhanced communication range, making it well-suited for outdoor activities and field operations. Built with MIL-STD-810G military-grade ruggedness and an IP54 dust and water resistance rating, the V86 ensures reliable performance in tough environments. Whether for personal, recreational, or professional use, the Icom V86 offers reliable communication with exceptional durability and performance, making it an ideal choice for demanding situations. For more information, start a chat in the bottom right corner or contact us here.  Icom V86 Key Features: Extensive Channel Support: 207 programmable channels (200 memory, 1 call channel, and 6 scan edges) for versatile communication setups. Clear Audio Output: A 1500 mW speaker provides loud and clear sound, even in noisy environments. Frequency Range: Operates on the 144 MHz band (2 meters) with a range of 136–174 MHz. Adjustable Power Levels: Selectable power settings allow users to balance range with battery efficiency. Compact Size: Lightweight and portable, measuring 58.6 x 112 x 30.5 mm and weighing around 300 g. Optional Accessories: Compatible with external microphones, headsets, and rapid chargers for added convenience. Icom V86 Kit Includes: Radio Battery pack (BP298/BP264) Desktop charger (BC240) AC adapter (BC242) Belt clip (MB124) Antenna Icom V86 Warranty *2-year manufacturer's warranty.

Read more less

6-Bay SURPASS Desktop Charger - Multi-Unit Charging for BKR Series The BK Technologies BKR0300-6 is a high-performance SURPASS™ Vehicular Charger specifically designed for BK Technologies BKR Series portable radios. This rugged vehicle-mount charger ensures fast and efficient power replenishment while on the go, making it an essential tool for public safety, emergency response, and field professionals who require continuous operation. Engineered for seamless in-vehicle integration, the BKR0300-6 delivers advanced charging performance to ensure your vital communication devices are always powered and operational. Key Features Rugged Vehicle Mount Design: Built to withstand the demands of mobile environments, ensuring secure installation in any vehicle. SURPASS™ Technology: Provides advanced charging performance for optimized battery life and efficient power delivery. Dual USB Charging Ports: Offers convenient additional charging options for other devices while on the go. 12VDC (Hardwired): Designed for secure, permanent electrical connection within the vehicle's power system. Horizontal or Vertical Mounting Bracket: Allows for flexible installation to best suit available space and user preference. Compatible with BKR Series Portable Radios: Ensures perfect fit and functionality with your BK Technologies handheld devices. Compatible with Batteries: Works with BKR0100, BKR0101, and BKR0102 rechargeable batteries. Compatibility Radios BKR 5000 BKR 9000 Batteries BKR0100 BKR0101 BKR0102 Benefits Rapid Charging: Quickly recharges BKR Series portable radio batteries, minimizing downtime and maximizing field readiness. Enhanced Connectivity: Dual USB ports provide added convenience for charging essential accessories simultaneously. Reliable In-Vehicle Power: Ensures your critical communication devices are always charged and operational, no matter your location. Secure and Stable Installation: Rugged design and included mounting bracket provide a dependable setup that withstands vehicle movement. Optimized Battery Performance: SURPASS™ Technology helps extend the lifespan and efficiency of your compatible BK Technologies batteries.   Warranty 1-year manufacturer's warranty

Read more less

Icom HM216 Standard Hand Microphone for Mobile and Gateway Radios The Icom HM216 is a durable and reliable standard hand microphone designed for use with the A120 air band mobile radio and other compatible Icom communication systems. This microphone is built to withstand the rigors of frequent professional use in demanding environments, ensuring clear and consistent audio transmission. Featuring a dust-proof PTT (Push-to-Talk) switch, the Icom HM216 guarantees the primary communication control remains functional and responsive over time. Its flexible, high-quality coiled cable extends for comfortable operation away from the radio, while the modular connector ensures a secure, plug-in connection to the transceiver. Key Features Dust-Proof PTT Switch: Ensures the Push-to-Talk button maintains functionality and prevents failure due to dust and debris ingress. Modular Connector: Utilizes a standard modular (RJ-45 style) connector for a simple, reliable, and stable connection to the mobile radio's front panel. Durable Coiled Cable: The high-quality coiled cable provides flexibility for handheld use while maintaining a tidy, compact length (approximately 19.3 inches when curled). Robust Construction: The microphone's tough and reliable housing is designed to endure harsh conditions, suitable for mobile and vehicle installations. Compatibility A120 A120E VE-PG4 X-Band Air Benefits Reliable Transmission: The dust-proof PTT switch eliminates the most common point of failure for hand microphones, ensuring dependable communication. Ease of Use in Mobile Settings: The compact, flexible design is perfect for quick access and operation in a vehicle cabin or workstation. Guaranteed Fit: As an Icom original accessory, it ensures seamless compatibility and optimal audio quality with the A120 mobile radio. Broad System Support: Compatible with systems like the VE-PG4 Gateway, making it a versatile tool for network communication management.   Warranty 1-year manufacturer's warranty

Read more less

Mini-UHF to UHF Coaxial Adapter Cable for Mobile Transceivers Premium RF signal bridge engineered to facilitate stress-free coaxial connectivity across professional mobile fleets. The Motorola HKN9557A is a genuine original equipment manufacturer coaxial RF accessory designed to bridge critical connection points in your communications hardware. Engineered as a highly durable 8-inch flexible bridge element, the Motorola HKN9557A Mini-UHF to UHF Antenna Adapter Cable for Mobile Radios facilitates seamless conversion between differing interface terminals. This specialized pigtail adapter cable converts a standard male mini-UHF connector on the host radio chassis to a standard female UHF (SO-239) terminal receptacle, allowing rapid deployment with heavy-duty coax infrastructure. The Motorola HKN9557A is the updated version of the Motorola HKN9557. This high-performance flexible connection element is purpose-built for mobile fleet installers, remote dispatch coordinators, and emergency vehicle technicians requiring clean RF line routing. By introducing an 8-inch flexible buffer line, the Motorola HKN9557A effectively dampens physical stress, vibration, and torque applied directly to the internal circuit board contacts of the radio deck. This structural cushion resolves a common workplace challenge where rigid, thick, low-loss transmission lines like LMR-400 coax can pull or warp structural connectors during high-speed transit. Operators should note that this passive transmission element is designed specifically for standard mini-UHF ports and will not mate with alternative BNC, SMA, or N-Type interfaces. This short patch component includes no independent active electronics, internal power rails, or frequency-filtering software elements. The standalone mobile radio transceiver chassis, dashboard mounting brackets, heavy-duty external power wiring harnesses, and primary mobile roof-mount antennas are sold separately. Key Features & Benefits Stress-Reducing Flexibility: Built with an 8-inch flexible lead that isolates heavy physical pull forces from delicate rear multi-pin radio chassis decks. Low-Loss RF Engineering: Features high-grade shielded materials to maintain stable impedance matching and minimize signal attenuation over line paths. Precision Mini-UHF Mating: Built with an explicit male mini-UHF terminal stud ensuring a perfect mechanical lockdown with compatible transceivers. Standard UHF Interface: Outfitted with a premium female UHF connector to accept standard PL-259 male terminal studs on transmission coax lines. Genuine Factory Tolerances: Manufactured strictly as an official Motorola HKN9557A Mini-UHF to UHF Antenna Adapter Cable for Mobile Radios assembly to preserve full factory electrical ratings. Specifications Attribute Details Brand Motorola Model/SKU HKN9557A Product Type Antenna Adapter Cable Connectors Mini-UHF Male to UHF Female (SO-239) Cable Length 8 Inches Color Black Compatibility XPR5550 CDM1550 GM300 M1225 DM4400E DM4401E DM4600E DM4601E DM3000 DGM4100 DGM6100 DGM5000E DGM5500E DGM8000E DGM8500E XiR M8620i XiR M8628i XiR M8668i MANTARAY EXPRESS MORPHEUS Recommended Accessories Motorola XPR5550 Mobile Two-Way Radio – High-performance digital mobile transceiver utilizing a rear mini-UHF antenna connector port. Motorola HKN4191C Mobile Power Cable – Heavy-duty direct-to-battery power cord assembly designed to supply consistent current to mobile radio housings. Frequently Asked Questions What is the exact physical length of this adapter assembly? This patch cable element measures exactly 8 Inches from the outer edge of the male mini-UHF stud to the tip of the female UHF jack. Can this cable adapter be utilized on an individual portable handset? No, this accessory is specifically configured and physically size-mapped to align with the rear RF layout ports found on mobile vehicle radio decks. Why is a flexible patch line recommended over a solid one-piece adapter plug? The flexible 8-inch pigtail body absorbs mechanical chassis vibrations and line pull forces, preventing structural cracks or stripping on internal circuit boards. Does this purchase include the external vehicle roof mount antenna? No, this listing covers strictly the short adaptation patch cord. Primary low-loss transmission coax, magnetic bases, and whip elements are sold separately. Is this an original manufacturer part or an aftermarket equivalent? This is an authentic genuine original equipment manufacturer accessory built by Motorola to ensure low attenuation and optimal impedance matching. What type of line termination is required on my main antenna cable? Your primary low-loss antenna transmission line must be terminated with a standard male UHF (PL-259) connector to thread cleanly into this adapter.   Warranty 1-year manufacturer’s warranty.

Read more less

UHF Through-Hole Mount Antenna with Integrated 17-Foot Cable High-performance vehicular communications kit engineered to maximize signal propagation toward the horizon in flat geographic regions. The Motorola HAF4013A is an authentic original equipment manufacturer wideband mobile antenna kit designed to ensure resilient, high-tier mission-critical communications. Operating within the 762–870 MHz sector of the upper UHF frequency spectrum, this permanent roof-mount radiating assembly delivers a stable 3 dB gain profile. The Motorola HAF4013A UHF (762-870MHz) 3 dB Through-Hole Mount Antenna is uniquely optimized to direct RF energy out toward the horizon rather than up into the atmosphere, making it the ideal mobile infrastructure asset for public safety fleets, rural emergency services, and commercial utility networks operating across expansive, geographically flat terrains where base station towers are sparse. The Motorola HAF4013A is the updated version of the Motorola HAF4013. Constructed for permanent external vehicular deployment, this industrial-grade kit features a heavy-duty through-hole NMO style mount base that permanently fastens to a vehicle’s steel roof or trunk deck. The integrated layout includes a pre-terminated 17-foot low-loss coaxial transmission line equipped with a factory-crimped male Mini-UHF connector block. This seamless layout protects the internal signal pathway against electromagnetic interference, engine block heat, and moisture penetration. Because the molded compact low-profile aerodynamic housing design measures just 2.38 inches tall, it significantly minimizes the risk of physical impact damage from low-hanging branches, overhead parking structures, or garage entryways. Technical installers should note that this permanent through-hole system requires standard sheet-metal drilling equipment to form a clean, water-tight mechanical seal against the vehicle's metallic ground counterpoise. This standalone mobile antenna solution functions as a complete vehicular installation kit including the low-profile antenna, mount, and cable; it contains no built-in active GPS modules, electronic amplification boards, or digital tracking transponders. The standalone mobile two-way transceiver frame, multi-conductor dashboard power harnesses, external heavy-duty loudspeakers, and handheld desktop control heads are sold separately. Key Features & Benefits Horizon-Directed UHF Focus: Delivers a stable 3 dB gain profile specifically configured to project upper UHF signals horizontally, maximizing coverage in flat landscapes. Aerodynamic Low-Profile Housing: Compact, impact-resistant molded shell stands at just 2.38 inches high, protecting the antenna from low-clearance obstacle strikes. Integrated 17-Foot Coaxial Line: Comes pre-wired with a generous low-loss cable run to simplify clean vehicle routing through structural headliners and wire channels. Permanent Through-Hole NMO Mount: Solid all-brass mounting foundation secures tightly through a drilled metallic surface to establish an absolute water-tight environmental barrier. Pre-Terminated Mini-UHF Pin: Features a premium factory-crimped Mini-UHF connector tip to guarantee a perfect low-attenuation lock with high-tier mobile transceivers. Specifications Attribute Details Brand Motorola Model/SKU HAF4013A Product Type Mobile Vehicular Antenna Kit Antenna Design Low-Profile / Compact Cylinder Style Frequency Band UHF (700 / 800 MHz Public Safety Band) Frequency Range 762 – 870 MHz Gain 3 dB Mounting Type Permanent Through-Hole NMO Mount Cable Length 17 Feet Cable Type Low-Loss Coaxial Connector Type Mini-UHF Male Integrated GPS No Dimensions 2.38 x 1.50 x 1.50 Inches Primary Color Black with Brass/Chrome Base Hardware Compatibility APX1500 APX1500ENH APX2500 APX2500ENH APX4500 APX4500ENH APX5500 APX6500 APX7500 APX7500CONSOLETTE APX8500 DGM4100 DGM5000E DGM5500E DGM6100 DGM8000E DGM8500E ENHANCEDAPX5500 ENHANCEDAPX6500 ENHANCEDAPX6500/LI XIRM8220 XIRM8228 XIRM8260 XIRM8268 Recommended Accessories Motorola HKN6188B Control Head Power and Speaker Cable – Premium remote cabling infrastructure assembly built to route clean power, audio links, and ignition automation commands alongside your mobile antenna run. Motorola HKN4191C Mobile Power Cable – Heavy-duty direct-to-battery primary DC power cord engineered to distribute stable electrical current to APX series vehicle transceivers. Frequently Asked Questions Does this antenna assembly incorporate a secondary GPS tracing line? No, this specific model is a dedicated passive single-band RF radiating kit for 700/800 MHz UHF communications and does not include an internal GPS antenna path. Is a separate magnetic base compatible with this specific antenna unit? This kit is factory-integrated with a permanent through-hole NMO mount and a pre-attached 17-foot cable, meaning it is built for fixed drilled layouts rather than quick-swap magnetic setups. Why is a 3 dB horizon-focused antenna optimal for flat geographic areas? By directing the radiation pattern outwards toward the horizon instead of upwards into space, it maximizes total horizontal reach across regions where base towers are distant. Can I manually shorten the 17-foot coaxial line if there is excess slack? Yes, qualified communication technicians can trim the low-loss cable to an exact vehicle path dimension, provided a new replacement male Mini-UHF terminal pin is properly crimped on. Will this model connect to a radio with a standard BNC or SMA port? No, this line features a pre-terminated male Mini-UHF connector. If your transceiver chassis uses an alternative RF layout, a matching coaxial adapter piece is required. What diameter hole must be drilled into the vehicle roof for this mount? Standard mobile NMO through-hole installations typically require a clean 3/4-inch hole drilled directly through a flat sheet-metal surface to lock down the brass base securely.   Warranty 1-year manufacturer’s warranty.

Read more less