All Products

Black IMPRES 2-Wire Acoustic Tube Surveillance KitThe Motorola PMLN7269ANS is a black IMPRES two-wire surveillance kit with an acoustic tube earpiece and a combined microphone and push-to-talk (PTT) control. One wire provides receive audio while the second carries the microphone/PTT assembly, allowing separate routing for discreet communication.Prefer beige? The separately sold Motorola PMLN7270A is the beige option. Select the exact part and confirm any required radio-system approvals rather than assuming every specification is identical between versions.Key Features Two-wire layout: Separate receive-audio and microphone/PTT leads. Black finish: PMLN7269ANS is the black option; PMLN7270A is available separately in beige. Acoustic tube listening: Clear coiled tube and rubber earbud. IMPRES accessory: Confirm feature support with the selected radio configuration. Manual PTT control: Transmit using the combined microphone/PTT assembly without lifting the radio. Specifications Attribute Details Brand Motorola Part number PMLN7269ANS Product type IMPRES 2-wire surveillance kit Color Black Earpiece Clear acoustic tube with rubber earbud Microphone / control Combined microphone and PTT on separate lead from receive audio Listed ingress rating IP67; follow applicable manufacturer use and connection requirements Earlier part references PMLN7269A and PMLN7269; PMLN5724A also appears in the prior replacement references and requires exact-application confirmation Beige option PMLN7270A, sold separately Warranty 1-year manufacturer's warranty CompatibilityThe original radio references are retained below. Confirm the exact radio variant, accessory connection and feature support before ordering. DEP550 DEP550E DEP570 DEP570E DGP8050EELITE DP2400 DP2400E DP2600 DP2600E DP3441 DP3441E DP3661E R5 MTP3000REFRESH MTP3000SERIES XPR3300 XPR3300E XPR3500 XPR3500E XPR3550 XPR3550E Hazardous-Location SelectionThe existing listing identifies a TIA4950 (UL) intrinsically safe application. Verify the complete approved radio, battery and accessory combination against the intended hazardous-location classification before use. This accessory alone does not make a standard radio intrinsically safe, and physical compatibility does not establish system approval.What's Included Description SKU / Model Status Black 2-wire surveillance kit with acoustic tube, microphone and PTT PMLN7269ANS Included Radio Compatible portable radio Not included Beige surveillance kit PMLN7270A Sold separately Recommended ProductsEarpieces Motorola PMLN7270A: Beige two-wire surveillance-kit option for customers who prefer beige rather than black.Frequently Asked QuestionsWhat color is the PMLN7269ANS?This is the black version with a clear acoustic tube.Is there a beige option?Yes. Choose the separately sold Motorola PMLN7270A for the beige option.What does two-wire mean?One lead handles receive audio, while the second includes the combined microphone and PTT control.Does it provide hands-free transmission?The listed transmit control is manual PTT. Voice-activated transmission is not established here.Does IMPRES mean the kit provides AI noise suppression on every radio?No universal AI noise-suppression capability is established here. Confirm supported audio features for the exact radio, software and accessory combination.What earlier parts are referenced?The original listing identifies PMLN7269A and PMLN7269 as earlier references. It also names PMLN5724A; verify the exact replacement application before ordering against that reference.Is it approved for every hazardous location?No. Approval depends on the complete radio, battery and accessory combination and the intended location classification.What warranty is included?The kit is listed with a 1-year manufacturer's warranty.Warranty1-year manufacturer's warranty.

Read more less

Motorola PMNN4486A IMPRES 2 Li-Ion 3400mAh Battery High-capacity IMPRES 2 Lithium-Ion battery for APX and XPR series radios. 3400 mAh. IP68. MIL-STD-810 rated. Updated version of the PMNN4486. The Motorola PMNN4486A is a high-capacity IMPRES 2 Lithium-Ion battery delivering extended talk time and reliable performance for Motorola APX and XPR series two-way radios. With a 3400 mAh capacity, IP68 waterproof and dustproof rating, and MIL-STD-810 durability compliance, it is built for demanding field operations. The PMNN4486A is the updated version of the PMNN4486. Key Features & Benefits 3400 mAh Capacity: Significantly extended talk time compared to standard batteries, keeping your team connected throughout the workday. IMPRES 2 Technology: Automatic charge management and calibration maximize battery life cycles and optimize runtime without manual intervention. IP68 Rated: Waterproof and dustproof for reliable use in harsh outdoor and industrial environments. MIL-STD-810 Compliant: Meets or exceeds military specifications for durability against shock, vibration, and environmental exposure. Li-Ion Chemistry: Lightweight, high energy density design with no memory effect — top-off charging at any time without reducing overall capacity. Broad Compatibility: Designed for a wide range of Motorola APX and XPR series portable radios. Specifications Attribute Details Brand Motorola Solutions Model / SKU PMNN4486A Replaces PMNN4486 Chemistry Lithium-Ion (Li-Ion) Capacity 3400 mAh Technology IMPRES 2 Ingress Protection IP68 Durability MIL-STD-810 Country of Origin Malaysia Compatibility Model Series APX5000 Motorola APX Series APX6000, APX6000 LI, APX6000 XE Motorola APX6000 Series APX7000, APX7000XE Motorola APX7000 Series APX8000 Motorola APX8000 Series SRX2200 Motorola SRX Series Warranty 1-year manufacturer’s warranty.

Read more less

Heavy-Duty Nylon Carrying Case with 3-Inch Belt Loop Durable, Lightweight Protection for CP, HT, and DP Series Radios The Motorola HLN9701B is a professional-grade carrying solution designed to provide maximum mobility and protection for your two-way radio. Constructed from heavy-duty, job-site-tested nylon, this case is engineered to withstand the rigors of demanding work environments, from construction sites to security patrols. Its lightweight and easy-to-clean design ensures that operators can remain focused on their tasks without the bulk of traditional leather cases, while still benefiting from essential impact and abrasion resistance. The Motorola HLN9701B is the updated version of the Motorola HLN9701A and Motorola HLN9701. This case features a fixed 3-inch belt loop, allowing for a secure and stable attachment to standard duty belts and waistbands. To further enhance utility, the Motorola HLN9701B includes integrated D-rings, enabling the attachment of a carrying strap for over-the-shoulder use. The "non-display" design provides a snug, wrap-around fit that shields the radio chassis from dust and debris while maintaining full access to the top-mounted volume and channel knobs. By keeping the radio securely positioned at the hip, the HLN9701B reduces the risk of accidental drops and frees up the user's hands for critical operations. Whether you are managing a fleet of CP200d portables or legacy HT-series units, this genuine Motorola accessory ensures your communication equipment remains protected and accessible throughout the longest shifts. Key Features & Benefits High-Impact Nylon: Durable, weather-resistant material designed for long-lasting use in industrial environments. Fixed 3-Inch Belt Loop: Provides a wide, stable mounting point that prevents the radio from bouncing or shifting during movement. Integrated D-Rings: Allows for versatile carrying options, including compatibility with standard radio shoulder straps. Lightweight & Ergonomic: Minimizes user fatigue during all-day wear while providing quick-access retrieval. Easy-to-Clean Surface: Resistant to oils and moisture; can be wiped down easily to maintain a professional appearance. Comprehensive Protection: Shields the radio's housing from scratches and wear, preserving the device's resale and operational value. Specifications Brand: Motorola Solutions Part Number: HLN9701B Material: Heavy-Duty Nylon Attachment Type: Fixed 3-Inch Belt Loop Dimensions: 5.50" H x 2.00" W x 2.50" L Display Style: Non-Display (Display is covered) Hardware: Includes D-Rings Compatibility CP200d CP100d DEP450 DP1400 HT750 HT1250LS HT1550XLS GP340 CP040 CP180 EP350MX GP3188 GP3388 GP3688 GP380 XiRP3688 Frequently Asked Questions Can I see the screen through this case? No, the HLN9701B is a non-display case meant for maximum protection. For display models, a clear-front or "open-face" case is recommended. Is the belt loop a swivel type? No, this model features a fixed belt loop for a more stable, close-to-the-body fit. Does it come with a shoulder strap? No, the strap is sold separately, but the case includes the D-rings required to attach one. Warranty 1-year manufacturer's warranty

Read more less

Slim Replacement Lithium-Ion Power Cell for Compact Business Radios Maintain lightweight operations and dependable shift-long power across your workplace. The Motorola HKNN4014B (also widely recognized as the BT60) is a genuine original equipment manufacturer (OEM) standard-capacity lithium-ion rechargeable battery designed specifically for ultra-compact business two-way radios. Integrating the Motorola HKNN4014B or BT60 battery pack into your on-site wireless setup provides your service teams, retail staff, and coordinators with a reliable electrical foundation. Engineered to preserve the streamlined profile of small-format handheld portables, this premium power solution ensures uninterrupted communication pathways without adding unnecessary physical bulk or weight to employee uniform belts. The Motorola HKNN4014B is the updated version of the Motorola HKNN4014A and Motorola HKNN4014. Manufactured using premium grade-A lithium cells, this 1130mAh battery includes integrated electronic monitoring safety controls to shield the radio chassis from potential short circuits, overcharging states, and unexpected thermal loads. The outer shell is constructed from a high-density, shatter-resistant polymer composite that deflects mechanical shocks, impacts, and drops on commercial warehouse floors, restaurant line stations, and medical clinics. The precision-molded contact alignments clip seamlessly into host radio rail guides to maintain a constant, clean current stream during active manual labor shifts. Key Features & Benefits Standard Business-Class Runtime: Delivers a specialized 1130mAh capacity rating fine-tuned to power compact business transceivers through standard operational workflows. Dual-Design Identifier: Certified factory component recognized interchangeably as the HKNN4014B part number or the BT60 standard-capacity battery series. Ultra-Lightweight Ergonomics: Features a thin-profile architecture designed to minimize worker fatigue by maintaining the low weight of discrete earpiece radios. Integrated Safety Circuitry: Outfitted with specialized internal protection boards that protect individual cells from rapid over-discharging or external voltage surges. Genuine OEM Fitment Alignment: Guaranteed original equipment production tolerances prevent internal rattling and maintain an airtight connection with the power terminals. Specifications Attribute Details Brand Motorola Model / SKU HKNN4014B Alternative Identifier BT60 Battery Chemistry Lithium-Ion (Li-Ion) Rated Capacity 1130 mAh Nominal Voltage 3.7V DC Enclosure Compound High-Impact Polycarbonate Composite Compatibility CLK446 CLP1060 TLKRT72 CLK446PLUS CLP1010 CLP1040 CLP107 CLP117 CLP446 XT185 Recommended Accessories Motorola CLP1010e UHF Small Two-Way Radio — Primary compact business radio powered by this replacement cell.  Motorola PMMN4125B Remote Speaker Microphone — Heavy-duty wired RSM utilizing this exact power pack platform.  Motorola HKLN4441A Standard Battery Door – The official original equipment replacement low-profile back cover designed to enclose this standard BT60 cell perfectly onto your radio chassis. Motorola HKLN4604A Swivel Earpiece – A high-clarity professional communication headset equipped with an inline push-to-talk button built for the CLP radio audio interface. More Resources Can You Charge a Radio Battery Without a Charger? Safe Options and Risks Explained Frequently Asked Questions Can the Motorola HKNN4014B battery replace older battery versions? Yes, this battery pack is the official direct replacement for legacy model numbers HKNN4014 and HKNN4014A. It fits into the same radio compartments and utilizes identical desktop charging docks while offering enhanced performance stability. How many hours of operational runtime does this power pack provide? This component provides up to 12 hours of continuous talk time on a standard operational duty cycle. Actual performance varies depending on transmission power, frequency band settings, and usage patterns throughout the shift. Does this power module require a special high-capacity battery door? No, this unit is built with standard physical dimensions that fit standard factory doors perfectly. High-capacity variants like the legacy high-capacity packs require a deeper custom housing door, but this standard cell utilizes your original factory enclosure configuration.   Warranty 1-year manufacturer's warranty.

Read more less

Icom CP23L 12V DC Cigarette Lighter Cable for Rapid Chargers 1.8-meter (6ft) 12V DC fused cigarette lighter cable for Icom rapid charger desktop bases. 12–16V input, 4A internal fuse. EIA “S” connector. The Icom CP23L is a 12V DC power cable that connects a standard vehicle cigarette lighter socket to compatible Icom rapid charger desktop bases, enabling in-vehicle radio charging without a mains power supply. At 1.8 meters (6 feet), it provides ample reach for routing through vehicle consoles or dashboard mounts. A 4A internal fuse protects both the charger and vehicle electrical system from surges or short circuits. The wide 12–16V input range maintains consistent power delivery during engine starts and varying alternator outputs. Compatible with desktop charging bases including the BC119NS, BC160, BC193, BC210, BC213, and BC220. Key Features & Benefits Vehicle Power for Icom Chargers: Powers compatible Icom rapid charger desktop bases directly from any standard 12V vehicle accessory port. 1.8-Meter (6ft) Cable: Ample length for routing through vehicle consoles, glove boxes, or dashboard mounts without pulling tight. 4A Internal Fuse: Protects the charger and vehicle electrical system from overloads and short circuits. 12–16V Wide Input Range: Maintains stable power delivery across varying alternator outputs and during engine starts. EIA “S” Connector: Heavy-duty 2.1mm / 5.5mm female connector for a secure, vibration-resistant fit with Icom charging cradles. Specifications Attribute Details Brand Icom Model / SKU CP23L Input Voltage 12–16V DC Output Current 4.0A Max Cable Length 1.8m (6.0ft) Connector Type EIA “S” Female (Outer Ø5.5mm / Inner Ø2.1mm) + Cigarette Plug Fuse Protection 4A Internal Fuse (User-Replaceable) Country of Origin Japan Charging Base Compatibility Charger Base Notes BC119NS Rapid Charger for F9011 & F9021 BC160 Icom Desktop Rapid Charger Base BC193 Icom Desktop Rapid Charger Base BC210 Icom Desktop Rapid Charger Base BC213 Icom Desktop Rapid Charger Base BC220 Icom Desktop Rapid Charger Base Radio Compatibility Model Series A16 Icom Aviation F1000, F2000, F1100D, F2100D Icom F Series Analog F1000, F1100D, F2000, F2100D Icom F Series Digital F3003, F3033, F3210D, F3230D, F3263D Icom F Series Analog/Digital F3400D, F4003, F4033, F4210D, F4230D, F4263D, F4400D Icom F Series IDAS Digital F52D, F62D Icom F Series IDAS Digital F7010, F7020, F7040 Icom F7000 Series P25 G86, G88 Icom G Series ID-52A Icom D-STAR Amateur IP501H, IP503H Icom IP Series (PoC) IP730D, IP740D Icom IP Series (PoC) M85, M88 Icom M Series Marine/Land Mobile T10 Icom T Series U86, U88 Icom U Series V80, V80E, V86, V88 Icom V Series What’s Included Icom CP23L Cigarette Lighter Cable (1.8m) Frequently Asked Questions Can I plug this directly into my radio? No. The CP23L is designed to power Icom desktop charging bases, not the radio’s side accessory port. Connect it to the appropriate Icom charger base for your radio model. Is this compatible with 24V truck electrical systems? No. The CP23L input range is 12–16V DC only. Using it in a 24V system will blow the fuse and may damage the equipment. Can the fuse be replaced? Yes. The cigarette lighter plug contains a user-replaceable 4A fuse. Replace only with a fuse of the same rating. Warranty 1-year manufacturer’s warranty.

Read more less

Hytera BRK08 Vehicle Installation Kit for HM782 & MD782i Genuine Hytera vehicle mounting bracket for secure in-vehicle installation of the HM782 and MD782i mobile radios. The Hytera BRK08 is a durable vehicle installation bracket designed to securely mount the Hytera HM782 and MD782i mobile radios in your vehicle. It provides a stable, professional mounting solution for easy radio access while driving. Key Features & Benefits Secure Mounting: Sturdy bracket keeps the radio firmly in place during vehicle operation. Easy Installation: Straightforward vehicle installation requiring minimal effort. Full Radio Access: Positions the radio for easy access to controls while driving. Genuine Hytera OEM: Designed specifically for the HM782 and MD782i for a precise fit. Specifications Attribute Details Brand Hytera Model / SKU BRK08 Product Type Vehicle Installation Bracket Country of Origin China Compatibility Model Series HM782 Hytera H-Series DMR Mobile Radio MD782i Hytera MD Series DMR Mobile Radio Warranty 1-year manufacturer’s warranty.

Read more less

Professional IP67 Submersible Remote Speaker Microphone with Emergency Button Genuine Hytera heavy-duty palm speaker mic featuring IP67 water immersion protection, an emergency call button, 3.5mm listen-only earpiece jack, and UL913 intrinsically safe compatibility. The Hytera SM18N2 (catalog part SM18N2 / SM18) is an authentic original equipment manufacturer (OEM) heavy-duty remote speaker microphone (RSM) engineered for mission-critical voice communications across public safety, utilities, manufacturing, security, and industrial sectors. Built to withstand demanding physical conditions, this durable accessory carries an IP67 ingress protection rating, providing total defense against airborne dust penetration and withstanding complete water submersion up to one meter for 30 minutes without seal failure. When paired with compatible Hytera PD7i-UL913 and PD9i-UL913 portable radios, the SM18N2 is certified for deployment in hazardous, intrinsically safe (UL913) environments where non-incendive communications are required. Designed with personal safety and operational awareness in mind, the Hytera SM18N2 features a prominent, tactile orange emergency button located on the top of the housing, allowing operators to send duress signals and priority alarm calls instantly without reaching down to their belt-mounted transceivers. The internal acoustic assembly integrates a high-sensitivity electret condenser microphone alongside a powerful 2W maximum loudspeaker to deliver clear, distortion-free voice audio through ambient plant noise and severe weather. A built-in 3.5mm external audio jack enables the connection of secondary receive-only surveillance earpieces for private conversations in crowded public spaces or high-risk operational settings. Operating under commercial FCC Licensing standards, the SM18N2 features a heavy-duty coiled cord terminating in a dedicated 16-pin multi-pin radio connector with a knurled thumbscrew lock to guarantee continuous signal continuity across Hytera PD7i and PD9i digital portable radios. Key Features & Benefits IP67 Submersible Protection: Completely sealed against dust, grit, and water immersion up to 1 meter (3.3 feet) for 30 minutes, ensuring dependable performance in wet, muddy, or stormy field operations. Intrinsically Safe (UL913) Capable: Factory certified for deployment in hazardous industrial locations when paired with compatible Hytera PD7i-UL913 or PD9i-UL913 certified portable radios. Dedicated Emergency Alert Key: Top-mounted tactile orange emergency button enables quick, single-touch duress calls and alarm activation in critical situations. Integrated 3.5mm Earpiece Jack: Built-in 3.5mm socket allows seamless connection of listen-only earpieces for discreet communications and enhanced situational awareness. High-Output 2W Audio Speaker: Delivers loud, intelligible receive audio engineered to overpower loud machinery, engines, sirens, and outdoor wind noise. 16-Pin Locking Connector: Rugged multi-pin connector block with a knurled thumbscrew securely locks to the radio chassis to prevent accidental disconnections. 360-Degree Swivel Clothing Clip: Reinforced stainless steel alligator clip rotates smoothly to fasten securely to shoulder epaulets, duty straps, or lapels. Specifications Attribute Details Brand Hytera Model / SKU SM18N2 / SM18 Product Type Rugged Remote Speaker Microphone (RSM) Ingress Protection IP67 (Dust-Tight & Submersible to 1m for 30 min) Intrinsic Safety Rating UL913 Certified (When paired with UL913 radio models) Radio Connector Hytera Proprietary 16-Pin Multi-Pin with Knurled Thumbscrew Lock Accessory Audio Interface 3.5 mm (1/8") Receive-Only Audio Socket Microphone Sensitivity -42 ± 3 dB @ 1 kHz (3.0 V, 2.2 kΩ, 0 dB = 1 V/Pa) Speaker Rated Power 1.0 W (Rated) / 2.0 W (Maximum) Speaker Impedance 16 Ω ± 15% @ 1.5 kHz Speaker Frequency Response 90 ± 4 dB @ 1 kHz (1 W / 30 cm) Controls Side PTT Button, Top Emergency Alarm Button Operating Temperature -30°C to +60°C (-22°F to +140°F) Storage Temperature -40°C to +85°C (-40°F to +185°F) Dimensions (L x W x H) 3.40 x 2.44 x 1.72 in (86.30 x 62.10 x 43.80 mm) Weight Approx. 0.35 lbs (160 g) Cable Configuration Heavy-Duty Coiled Cable with Strain Relief Compatibility Compatible Hytera Portable Two-Way Radios PD702 PD702i PD752 PD752i PD782 PD782i PD982 PD982i PD702iUL913 PD752iUL913 PD782iUL913 PD982iUL913 PD792iEx Recommended Accessories Receive-Only Earpieces (3.5mm Plug) Hytera EA-01 Receive-Only Acoustic Tube Earpiece – Clear acoustic tube surveillance earpiece with 3.5mm audio plug for private listening. Hytera EH-01 Receive-Only C-Style Swivel Earpiece – Ergonomic C-ring swivel earpiece with 3.5mm audio plug for full-shift comfort. Hytera EH-02 Receive-Only C-Style Swivel Earpiece – Adjustable over-the-ear C-style earpiece with 3.5mm connector for active mobile personnel. Motorola RLN4941AXL 3.5 mm Extra Loud Receive-Only Earpiece – Intrinsically safe TIA4950/UL certified acoustic tube earpiece with 3.5mm connector. More Resources How to Choose and Properly Wear a Two-Way Radio Earpiece Browse All Hytera Two-Way Radios and Accessories Frequently Asked Questions What do the numbers in part number SM18N2 indicate? In Hytera's naming scheme, SM18 designates the rugged remote speaker microphone housing platform with an integrated emergency button. The N2 designation identifies the 16-pin multi-pin radio connector configuration and internal audio circuitry tailored specifically for Hytera PD7i and PD9i series portable radios. Is the Hytera SM18N2 intrinsically safe? Yes, when connected to an intrinsically safe Hytera portable radio such as the PD702i-UL913, PD752i-UL913, PD782i-UL913, or PD982i-UL913. The combination is certified to UL913 standards for safe operation in designated hazardous, explosive gas, or dust environments. What does the orange button on top of the microphone do? The orange button is a programmable emergency key. When activated, it triggers the host radio’s pre-programmed emergency profile, immediately sending distress alarms, emergency telemetry, or priority audio to dispatch and team members. Can I plug an earpiece directly into the SM18N2? Yes. The Hytera SM18N2 features a built-in 3.5mm audio jack. When an earpiece (such as the Hytera EA-01 or EH-01) is plugged in, receive audio is automatically muted on the main speaker and rerouted to the earpiece for private listening. Does this microphone work with Hytera HP series radios? No. The SM18N2 uses Hytera's 16-pin multi-pin connector specifically designed for the PD7i and PD9i series. Hytera HP series radios (such as the HP602 and HP782) utilize a different multi-pin connector interface.   Warranty 1-year manufacturer’s replacement warranty.

Read more less

Wireless Remote Speaker Microphone Dual-Unit Charger The Motorola PMLN7120A is a complete dual-unit desktop charger designed for wireless Remote Speaker Microphones (RSMs) and their batteries. This charger provides a centralized, efficient solution for powering critical communication accessories, ensuring they are always ready for deployment. The Motorola PMLN7120A is the updated version of the Motorola PMLN7120. Supplied as a full kit, the Motorola PMLN7120A includes the charger base and the necessary US/Canadian power supply. With two independent charging pockets, it allows users to charge two accessories or two spare batteries simultaneously. LED indicators provide clear visual confirmation of the charging status for each pocket, streamlining the power management process for your mobile accessory fleet. Key Features Dual-Unit Charging: Features two independent pockets, allowing simultaneous charging of two accessories (RSMs) or two spare batteries. Complete Charger Kit: Supplied with the charger base and the necessary US/Canadian power adapter for immediate plug-and-play use. Efficient Power Management: Designed for rapid and efficient power transfer to minimize accessory downtime. LED Status Indicators: Provides clear visual feedback on the charging status for each individual pocket. Wide Accessory Compatibility: Compatible with the wireless RSMs used across an extensive range of APX, MOTOTRBO XPR, and DGM mobile series radios. Compatibility APX1500 APX2000 APX2500 APX3000 APX4000 APX4500 APX5000 APX5500 APX6000 APX6000 XE APX6500 APX7000 APX7000XE APX7500 APX8000 APX8000XE APX8500 APXCONTROLHEAD DGM4100 DGM5000E DGM5500E DGM6100 DGM8000E DGM8500E XPR4380 XPR4550 XPR4580 XPR5350 XPR5350E XPR5380E XPR5550 XPR5550E XPR5580E Benefits Maximized Accessory Uptime: Simultaneous charging ensures spare batteries and RSMs are always charged and available for multi-shift operations. Centralized Charging: Provides an organized, space-efficient location for powering wireless communication accessories. Simplified Logistics: The complete kit reduces ordering complexity and guarantees electrical compatibility. Enhanced Efficiency: LED indicators allow users to quickly assess charging readiness without confusion.   Warranty 1-year manufacturer's warranty

Read more less

VHF (150.8–162 MHz) 1/4 Wave Roof-Mount Antenna The Motorola HAD4008A is a professional-grade VHF mobile antenna designed to provide reliable, unity-gain performance for vehicle-based two-way radios. Operating within the 150.8–162 MHz frequency range, this 1/4 wave antenna is specifically engineered for high-performance signal radiation in challenging environments. The Motorola HAD4008A is the updated version of the Motorola HAD4008. By radiating signals vertically, the HAD4008A is an ideal solution for urban areas where buildings and other tall structures can often obstruct radio waves. Its compact and durable roof-mount design ensures a secure installation and consistent communication clarity for public safety, transit, and commercial fleets. Key Features VHF Frequency Range: Optimized for the 150.8–162 MHz band. 1/4 Wave Unity Gain: Provides balanced signal distribution ideal for high-density urban settings. Vertical Radiation Pattern: Enhances signal penetration through obstacles and urban "canyons." Rugged Roof-Mount Design: Built to withstand the environmental rigors of mobile use on trucks, vans, and sedans. Simplified Profile: A non-GPS antenna focused purely on high-quality voice and data transmission. Radio Compatibility APX1500 APX2500 APX4500 APX6500 APX7500 APX8500 XPR5350e XPR5550e XPR5580e XPR2500 CM200d CM300d DEM300 DEM400 DEM500 DGM5000 DGM5500e DGM8000e DGM8500e CM340 CM360 GM338 GM380 CDM750 CDM1250 CDM1550 XTL1500 XTL2500 Benefits Optimized for Cities: The vertical signal radiation ensures you stay connected even when surrounded by tall infrastructure. Durable Construction: Manufactured to Motorola's high standards for long-term outdoor exposure and vehicle vibrations. Direct Compatibility: Works seamlessly with MOTOTRBO XPR and APX series mobile radios using standard NMO mounts. Low Profile: At approximately 17.75 inches in height, it offers a balance between performance and clearance for garages or low-hanging branches. Warranty 1-year manufacturer's warranty

Read more less

Icom MP66 (8810010771) Radio Accessory Dust Cover Screw Essential Hardware for Port Protection and Weather Resistance The Icom MP66 (8810010771) is a precision-engineered replacement screw specifically designed to secure the accessory connector dust cover on professional Icom portable radios. While small in size, the Icom MP66 (8810010771) plays a critical role in maintaining the integrity of your radio’s internal electronics by ensuring the protective cover stays firmly in place. This prevents the entry of dust, dirt, and moisture into the sensitive accessory pins during field operations. As a genuine Icom component, the Icom MP66 (8810010771) guarantees a perfect thread match and the same high-grade durability as the original hardware. It is an indispensable spare part for maintenance kits, allowing technicians to quickly restore the environmental sealing of a radio after a screw has been lost or damaged. By utilizing the Icom MP66 (8810010771), you ensure your device remains compliant with its original weather-resistance specifications. The Icom MP66 (8810010771) is fully compatible with the MP65 dust cover and provides a secure, vibration-resistant fit for the most popular high-tier Icom portables. Replacing a missing screw promptly with a genuine Icom MP66 (8810010771) protects your communication investment from long-term corrosion and connector failure caused by environmental exposure. Key Features & Benefits Secure Fitment: The Icom MP66 (8810010771) ensures that accessory covers remain attached even in high-vibration or heavy-duty industrial environments. Environmental Protection: Helps maintain the radio's seal against dust and moisture by providing the necessary tension for the port cover. Genuine OEM Quality: As an authentic Icom part, the Icom MP66 (8810010771) ensures no risk of cross-threading or improper seating. Corrosion Resistance: Constructed from high-quality materials to withstand sweat, rain, and humidity without seizing or degrading. Quick Installation: The Icom MP66 (8810010771) allows for effortless field replacement with standard tools, minimizing radio downtime. Specifications Part Number: 8810010771 Model Code: MP66 Material: High-Durability Metal Head Type: Standard Slot/Phillips Application: Accessory Port Cover Attachment Compatibility M85 F52D F62D F9011 F3400D F4400D F7010 F7020 Recommended Accessories Accessory Dust Cover (MP65) Waterproof Speaker Microphone (HM222) High-Capacity Li-Ion Battery (BP290) Frequently Asked Questions Does this screw include the dust cover? No, the Icom MP66 (8810010771) is the screw only. The MP65 dust cover must be purchased separately if needed. Can I use a standard hardware store screw instead? It is not recommended; the Icom MP66 (8810010771) has specific threading and length to ensure it does not damage the internal connector housing. Is this screw required for the radio to be waterproof? Yes, without the Icom MP66 (8810010771) to tighten the cover, the seal is not sufficient to prevent water ingress into the port. Warranty 1-year manufacturer's warranty

Read more less

1-Wire Acoustic Tube Earpiece — Discreet and Comfortable Audio Solution The Atlantic Radio ATL-AT1-CP1 is a cost-effective 1-wire acoustic tube earpiece designed for Motorola CP200, CP200d, BPR40, and compatible series portable radio users. Featuring UV-protected surgical tubing and hypoallergenic ear tips, it delivers clear, covert audio for extended wear in professional and outdoor environments. The twist-off acoustic tube design allows for quick, hygienic swapping between multiple users, making it ideal for shared radio fleets. Key Features Acoustic Tube Earpiece: Delivers clear audio through a transparent tube for covert communication. Inline PTT/Microphone: Offers convenient and accessible push-to-talk and voice transmission. UV-Protected Surgical Tubing: Enhances durability and longevity of the acoustic tube, especially for outdoor use. Discreet Communication: The transparent acoustic tube offers a low-profile appearance, ideal for sensitive environments or professional settings. Comfortable Extended Wear: Ear tips manufactured from surgical-grade material ensure user comfort throughout long shifts. Hands-Free Operation: The inline PTT/microphone enables convenient communication without needing to hold the radio, improving efficiency. Quick Disconnect Clip: Secures the earpiece and provides additional cable strain relief. Twist-Off Acoustic Tubes: Allows for hygienic, quick, and easy swapping between multiple users. Hypoallergenic Ear Tips: Designed for comfort and includes 1 extra clear ear tip. Strong Rotating Clip: Provides secure attachment and flexible positioning on clothing. Specifications Attribute Details Brand Atlantic Radio SKU ATL-AT1-CP1 Type 1-Wire Acoustic Tube Earpiece Microphone RF-Shielded Inline Mic PTT Inline PTT Connector 2-Pin Standard Motorola Plug Tubing UV-Protected Surgical Tubing Ear Tips Hypoallergenic Surgical-Grade (1 extra included) Wear Style Left or Right Ear PTT Pull Strength 30 lbs (both ends) Compatibility Radio Model Brand Type CP100D Motorola Portable CP185 Motorola Portable CP200 Motorola Portable CP200d Motorola Portable R2 Motorola Portable BPR40 Motorola Portable BPR40D Motorola Portable BPR45 Motorola Portable BPR50DX Motorola Portable RMU2040 Motorola Portable RMU2080 Motorola Portable RMU2080D Motorola Portable RMV2080 Motorola Portable RMM2050 Motorola Portable CLS1110 Motorola Portable CLS1410 Motorola Portable What's Included Description Status ATL-AT1-CP1 1-Wire Acoustic Tube Earpiece Included Extra Clear Hypoallergenic Ear Tip (x1) Included Replacement Parts & Accessories Atlantic Radio ETIP-C10 Replacement Ear Tips (10 Pack) – Hypoallergenic replacement ear tips compatible with this earpiece. Atlantic Radio EMC Molded Ear Tips (Clear) – Optional molded ear tips for a more customized and secure fit. Atlantic Radio Surgical Grade Acoustic Tube Set – Replacement acoustic tube set for maintaining hygiene and audio clarity. Atlantic Radio Acoustic Tube Connector – Replacement connector for the acoustic tube assembly. Frequently Asked Questions Will this earpiece fit my Motorola radio? The ATL-AT1-CP1 uses a 2-pin standard Motorola plug and is compatible with Motorola CP200, CP200d, BPR40, CLS1110, CLS1410, and other models listed in the compatibility table above. If you are unsure whether your radio is compatible, please contact Atlantic Radio Communications before ordering. What is the difference between this earpiece and the ATL-SW1-CP1 swivel earpiece? The main difference is how the earpiece is worn. The ATL-AT1-CP1 uses a rubber ear tip that rests inside the ear canal, delivering audio through a transparent acoustic tube. The ATL-SW1-CP1 swivel earpiece wraps around and over the ear with a speaker that sits just outside the ear canal, making it a better choice for users who prefer not to have anything inserted in their ear. How do I replace the acoustic tube? The acoustic tube features a twist-off design for quick and easy replacement without tools. Simply twist the tube counterclockwise to remove it and twist a replacement tube clockwise to secure it. Replacement tubes are available via the Atlantic Radio Acoustic Tube Set. Can this earpiece be worn on either ear? Yes, the ATL-AT1-CP1 is designed to be worn comfortably on either the left or right ear. What does the 1-year warranty cover? The 1-year warranty covers manufacturing defects in materials and workmanship under normal use conditions. It does not cover damage caused by misuse, accidents, or unauthorized modifications. Please contact Atlantic Radio Communications to initiate a warranty claim. Warranty The Atlantic Radio ATL-AT1-CP1 includes a 1-year warranty. Please contact Atlantic Radio Communications for warranty claims, support, or replacement inquiries.

Read more less

Motorola WPLN4199B  Keep Your Motorola Radio Charged with the WPLN4199B Single-Unit Charger Base Need a convenient way to charge your Motorola DP3441e or DP3661e radio? The Motorola WPLN4199B is a single-unit charger base designed to efficiently charge your compatible Motorola two-way radio. Simply place your radio in the base and let it power up for your next shift. Here's why you need this charger base: Efficient Charging: Quickly and easily charge your radio battery. Compact Design: Saves space on your desk or countertop. Secure Fit: Holds your radio securely in place while charging. Compatible with US and EU Plugs: Works with either the US plug power supply (25009297001) or the EU plug power supply (PS000037A01) for added flexibility. (Power supply sold separately) Compatible with these Motorola radios: DP3441e DP3661e Warranty: 1-year manufacturer's warranty Keep your Motorola radio ready for action with the WPLN4199B single-unit charger base. Order yours today!

Read more less

Hytera EAS03 The Hytera EAS03 is a receive-only transparent acoustic tube earpiece with a 2.5MM plug.   *1-year manufacturer's warranty.

Read more less

Hytera MD782i Digital DMR & Analog Mobile Two-Way Radio As a product built to the DMR standard, the Hytera MD782i Digital Mobile Radio delivers quality digital voice and data communications as well as all-around digital functions to increase your efficiency and enable you to be responsive to emergency situations. The radio can also be used as a control station to monitor and communicate with radio fleets from a desk. The GPS version of the radio allows integration with Hytera Smart Dispatch or other 3rd party GPS Solutions The Hytera MD782i is a mobile two way radio that works in DMR digital or analog mode. The MD782i Digital Mobile Radio has a selection of frequency splits in UHF and VHF bands to choose from. It has 50 watts of power output and is in certified pre-owned condition. A certified technician has upgraded, reset, aligned, enabled (wide-band) and tested this radio in order to ensure 100% functionality. The radio kit includes a lightly used radio, power cable and bracket (includes thumb and mounting screws). Atlantic Radio is offering a 3 year warranty on the radio and a 1 year warranty on the accessories. MD782i FEATURES Up to 1024 channels 12.5/20/25 selectable channel spacing Channel Scan supporting mixed mode scanning (Analog and Digital channel) 1.8” Color TFT Screen, 160x128 pixels, 4 rows IP54 and MIL-STD-810 G Compliant Supports GPS (specify model) Digital voice call function and digital text message function Remote Supports option board interface 5-Tone, HDC1200, 2-Tone signaling selectable (analog) One touch call/text message/supplemental services Basic digital encryption and analog Scrambler Advanced 256bit digital encryption (license required) Monitor, Radio Enable, Radio Disable, Call Alert, Lone Worker Analog and Digital Emergency calling Pseudo trunk operation (DMO & RMO) Multi-Site Roaming, Analog and Digital DTMF, Telemetry Supports XPT digital trunking Supports DMR Tier III Trunking (license required) 3 Year Standard Warranty (1 year on accessories) MD782i KIT INCLUDES Palm Microphone Microphone Hanger & Screws Mounting Bracket Power Cord Fuse GPS Antenna We are an authorized Hytera dealer. MD782i Brochure

Read more less

IMPRES™ IP68 Remote Speaker Microphone with 3.5mm Jack The Motorola PMMN4099DL (which replaces the PMMN4099 and PMMN4099CL) is a professional-grade, high-durability Remote Speaker Microphone (RSM) built for mission-critical reliability. This microphone is IP68 rated, meaning it is completely dust-tight and can withstand immersion in water for extended periods. Motorola PMMN4099DL is the updated version of the Motorola PMMN4099CL, Motorola PMMN4099B, Motorola PMMN4099BL, Motorola PMMN4099A, and Motorola PMMN4099. Equipped with IMPRES™ technology, the PMMN4099DL optimizes audio performance by suppressing ambient noise and improving voice intelligibility, ensuring even quiet transmissions are heard clearly. It is also TIA4950 (UL) intrinsically safe certified, making it suitable for use in hazardous environments where explosive gases or vapors may be present. Key Features IMPRES™ Audio: Superior noise suppression and automatic gain control for high-quality audio in any environment. Windporting Technology: Significantly reduces noise from high winds and prevents water from blocking the microphone grill. Rugged IP68 Rating: Submersible and dust-tight, designed to survive extreme field conditions. Full Control Set: Features a volume toggle, a dedicated orange emergency button, and a programmable button for custom shortcuts. 3.5mm Audio Jack: Includes a non-threaded jack for connecting receive-only earpieces for discreet listening. Intrinsic Safety: UL certified to TIA4950 standards for hazardous location safety. Compatibility APX1000I APX2000 APX3000 APX5000 APX6000 APX6000XE APX7000 APX7000XE APX8000 APX900 DEP550 DGP5050E DGP5550E DGP8550E DP4400 DP4400E DP4401 DP4401E DP4600 DP4600E DP4601 DP4601E DP4800 DP4800E DP4801 DP4801E GP328D GP328DPLUS GP338D GP338DPLUS MTP6000 MTP6650 SRX2200 XIRP8600 XIRP8608 XIRP8620 XPR7350 XPR7350E XPR7380E XPR7550 XPR7550E XPR7580 XPR7580E Benefits Maximum Durability: The IP68 rating ensures the microphone continues to function even after exposure to heavy rain or accidental submersion. Intelligent Audio: IMPRES technology removes the need for manual audio adjustments, allowing the user to focus on the task at hand. Enhanced Safety: The prominent orange emergency button allows for rapid distress signaling in critical situations. Versatile Use: The inclusion of a programmable button and audio jack makes it adaptable for both high-profile and discreet operations. Warranty 1-year manufacturer's warranty

Read more less

Icom V3500 65W 144MHz FM Mobile Transceiver High-Power Rugged Communication with Enhanced Audio Clarity The Icom V3500 is a mission-critical 2-meter FM mobile transceiver engineered for operators who require maximum range and uncompromising durability. Delivering a powerful 65W of RF output, this radio is designed to maintain stable, long-distance communications even during continuous high-duty cycle transmissions. The Icom V3500 features a robust integrated heatsink and a compact chassis, making it an ideal choice for vehicle installations where space is limited but high-performance signal propagation is essential for safety and coordination. Constructed to meet rigorous MIL-STD 810 G specifications, the Icom V3500 is built to withstand the shocks, vibrations, and environmental stresses of off-road and industrial mobile use. It sets a new standard for mobile audio with a class-leading 4.5W internal speaker that provides superior frequency response for crisp voice reception in noisy cabins. With advanced safety features including emergency alert functions and a modernized high-contrast display, the Icom V3500 provides a reliable lifeline for emergency responders and utility fleets alike. Choose Your Purchasing Option Option 1: V3500 65 USA (White Display): Features the modern high-visibility white LCD backlight for superior readability in direct sunlight or dark cabins. Option 2: V3500B 85 USA (Black Display): Features a high-contrast black background display for a sleek, low-profile aesthetic in your vehicle’s dashboard. Key Features & Benefits 65W High-Power Output: Provides four selectable power levels up to 65W, allowing you to maintain contact in remote or obstructed terrain. Class-Leading 4.5W Audio: Delivers loud and clear voice reception through an improved internal speaker designed to overcome engine and road noise. Modernized Contrast Display: High-readability LCD provides instant feedback on button functions and channel names for safer operation. Instant Volume & Mute: Includes dedicated one-touch controls to immediately mute the radio or boost volume to a preset level during critical shifts. Emergency Alert System: Integrated emergency call function sounds a local alarm while simultaneously transmitting a "hot mic" alert to notify others. MIL-STD 810 G Durability: Tough, die-cast aluminum chassis ensures the radio survives the harshest mechanical conditions and long-term mobile wear. Specifications Feature Specification Frequency Range (TX) 144–148 MHz Frequency Range (RX) 136–174 MHz RF Output Power 65W, 25W, 10W, 5W (Selectable) Audio Output 4.5 W (Internal Speaker) Memory Channels 207 (Including 1 Call & 6 Scan Edges) Durability Rating MIL-STD 810 G Power Supply 13.8 V DC What's Included Description SKU Status FM Mobile Transceiver V3500 / V3500B ✅ Included Remote Control Microphone HM-133V ✅ Included DC Power Cable OPC-1132 ✅ Included Mounting Bracket Kit N/A ✅ Included Recommended Accessories Icom External Speaker (SP35) More Resources V3500 Brochure V3500 Manual Frequently Asked Questions What is the difference between the V3500 and V3500B? The primary difference is the display style. The standard V3500 features a white LCD backlight for brightness, while the V3500B features a black background display for a low-profile aesthetic. Does this radio support weather alerts? Yes. The USA version includes a dedicated Weather Channel receive function and a Weather Alert feature to keep you informed of incoming severe weather. Can I program the radio without a computer? Yes. Most features and memory channels can be programmed directly from the keypad on the included HM-133V remote-control microphone.   Warranty 2-year manufacturer's warranty on the radio. 1-year manufacturer's warranty on the accessories. No returns or exchanges on this item.

Read more less

Motorola PS000042A12 Power Up Your Motorola Radio with the European Micro-USB Charger (PS000042A12) Keep your Motorola two-way radio charged and ready for action with this official European charger. The Motorola PS000042A12 is a compact and reliable micro-USB power adapter designed for use with a variety of Motorola radios. Featuring an EU plug, it's perfect for travel or everyday use in Europe. Compatible with the following Motorola radios: SL300 SL3500e EVX-S24 SL7550e TLK100 PMLN7094A CD65 SL4010e SL1600 SL2600 SL500e PMLN7851A Features: Genuine Motorola product: Ensures optimal performance and compatibility with your radio. EU plug: Ideal for use in Europe and compatible with European outlets. Micro-USB connector: Industry-standard connector for easy charging. Compact and lightweight: Convenient for travel and storage. Warranty: 1-year warranty for peace of mind. Don't get caught with a dead battery! Order your Motorola PS000042A12 European charger today.

Read more less

Hytera BC19, spring action belt clip, Hytera belt clip The Hytera BC19 spring action belt clip offers a reliable and practical solution for carrying your compatible Hytera portable radio. Its spring mechanism ensures a secure hold, preventing accidental drops while allowing for quick and easy attachment and removal. Keep your Hytera PD482i, PD7i Series, or PD982i Series radio readily accessible and securely fastened with this durable belt clip, ideal for professionals on the move. Key Features: Spring action for secure attachment    Durable construction Easy to attach and detach Keeps radio readily accessible Compatible with Hytera PD702i, PD752i, PD782i and PD982i Product Warranty: 1-year manufacturer’s warranty.

Read more less

Motorola PMLN8299A Hard Leather Carry Case with 3-Inch Swivel for R7 Genuine OEM hard leather carry case with 3-inch swivel belt loop for the Motorola MOTOTRBO R7 portable radio. Replaces PMLN8299. The Motorola PMLN8299A is a genuine OEM hard leather carry case with a 3-inch swivel belt loop for the Motorola MOTOTRBO R7 portable two-way radio. The hard leather construction protects the radio from impact, abrasion, and daily wear, while the swivel loop allows the radio to rotate freely on the belt for comfort and quick access. The PMLN8299A is the updated version of the PMLN8299. Key Features & Benefits Hard Leather Construction: Durable protection against drops, abrasions, and daily wear. 3-Inch Swivel Belt Loop: Allows the radio to rotate freely on the belt for natural movement and quick access. Open-Frame Design: Exposes the radio’s face, controls, and speaker for full operation without removing the radio from the case. Snap Button Closure: Secure D-ring swivel arm with snap button keeps the radio retained on the belt loop. Genuine Motorola OEM Part: Designed specifically for the R7 form factor, ensuring correct fit and full access to controls. Specifications Attribute Details Brand Motorola Solutions Model / SKU PMLN8299A (replaces PMLN8299) Product Type Hard Leather Carry Case Belt Loop 3-Inch Swivel Frame Style Open-Frame Country of Origin Malaysia Compatibility Model Series R7 Motorola MOTOTRBO R7 Series Recommended Accessories Compatible Radios Motorola MOTOTRBO R7 Portable Two-Way Radio Series — Compatible radio for this carry case. Frequently Asked Questions Can I operate the radio while it is in the case? Yes. The PMLN8299A uses an open-frame design that exposes the radio’s face, speaker, and controls, allowing full operation without removing the radio from the case. What is the difference between the PMLN8299A and the PMLN8299? The PMLN8299A is the updated production version of the PMLN8299. Both are designed for the Motorola R7 and are functionally equivalent. Will this case fit the R7 with a larger battery installed? The PMLN8299A is designed for the standard R7 form factor. Compatibility with extended or high-capacity batteries may vary — verify fit before ordering if using a non-standard battery. Warranty 1-year manufacturer’s warranty.

Read more less

Hytera SM09D1 External speaker with 6ft DB26 cable for HM782, HR1062, MD612i/MD622i/MD782i. Clear, loud audio for your Hytera radios. The Hytera SM09D1 External Speaker is an essential accessory for users of select Hytera DMR mobile radios and repeaters who require amplified and clear audio. Designed with a robust construction and a convenient 6-foot cable, this external speaker ensures your voice communications are heard even in noisy vehicle environments or demanding fixed installations. The DB26 port provides a secure and straightforward connection to devices such as the Hytera HM782 mobile radio, HR1062 repeater, and MD612i, MD622i, and MD782i digital radios. Elevate your communication experience by ensuring every transmission is delivered with maximum clarity. Key Features: Enhanced Audio Output: Delivers loud and clear sound for improved communication. Generous Cable Length: Features a 6-foot cable for flexible mounting options. DB26 Connector: Ensures secure and reliable connection to compatible devices. Durable Construction: Built for reliable performance in various environments. Optimized for Hytera: Designed specifically for seamless integration with compatible Hytera models. Compatibility: Mobiles: MD612i, MD622i, MD782i and HM782 Repeaters: HR1062   Product Warranty: 1-year manufacturer’s warranty.

Read more less

Hytera PWC10 The Hytera PWC10 is a vehicle power supply cable, 9.84 ft. with SR, red/black, greater than 15A.  This power supply cable works with the following Hytera DMR and Digital mobile radio:  HM782, MD612i, MD662i, MD782i.   *1-year manufacturer's warranty.

Read more less

Hytera CH10L30 Smart Single Desktop Charger Advanced charging for HP6, HP7, and PT590 series portable radios. The Hytera CH10L30 is a professional-grade smart desktop charger designed for Hytera HP6, HP7, and PT590 series portable radios. Its intelligent charging algorithm delivers a consistent 1000mA current and incorporates multiple integrated protection mechanisms — including over-temperature, over-voltage, over-current, and short-circuit protection — allowing for safe, unattended charging. Please note the CH10L30 requires the Hytera PS1014 Power Adapter, sold separately. Key Features Smart Charging Technology: Intelligent charging algorithm optimizes the charge cycle to maintain battery health and extend battery lifespan. 1000mA Charging Output: Steady, efficient charge rate to minimize downtime between shifts. Multi-Protection Safety Circuit: Built-in safeguards against over-temperature, over-voltage, over-current, and short-circuit conditions for worry-free overnight charging. LED Status Indicator: Clear visual feedback for monitoring charging status at a glance. Drop-In Design: Secure electrical connection every time, reducing wear on the radio’s charging contacts. Compact Desktop Footprint: Low-profile design saves workstation space while providing a stable base for the radio. Specifications Attribute Details Brand Hytera Model / SKU CH10L30 Product Type Single-Unit Desktop Charger Charging Current 1,000 mA Power Input Requires PS1014 Power Adapter (sold separately) Safety Protection Over-temperature, Over-voltage, Over-current, Short-circuit Country of Origin China Compatibility Model Series HP602 Hytera HP6 Series HP682 Hytera HP6 Series HP702 Hytera HP7 Series HP782 Hytera HP7 Series PT590 Hytera PT Series What’s Included Description SKU / Model Status Single-Unit Desktop Charger CH10L30 Included PS1014 Power Adapter PS1014 Sold Separately Recommended Accessories Required Power Adapter Hytera PS1014 Switching Power Supply (100–240V) — Required power adapter for the CH10L30 charger. Supports universal input voltage for use in North America and internationally. Multi-Unit Charging Hytera MCL39 Smart Multi-Unit Charger — Multi-unit smart charger for HP6 and HP7 series radios. Ideal for fleet deployments requiring simultaneous charging of multiple units. Frequently Asked Questions Does the CH10L30 come with a power adapter? No. The Hytera CH10L30 requires the PS1014 Power Adapter, which is sold separately. The charger will not operate without it. Can I leave my radio on the CH10L30 overnight? Yes. The CH10L30’s smart charging circuit includes over-temperature, over-voltage, over-current, and short-circuit protection, making it safe for unattended and overnight charging without risk of overcharging or overheating. Which Hytera radios are compatible with the CH10L30? The CH10L30 is compatible with the HP602, HP682, HP702, HP782, and PT590 portable radios. If you are unsure whether your specific radio model is supported, contact Atlantic Radio before ordering. Is the CH10L30 compatible with Hytera HP7 series radios? Yes. The CH10L30 is compatible with the HP7 series (HP702 and HP782), as well as the HP6 series and PT590. Warranty 1-year manufacturer’s warranty.

Read more less

Motorola PMNN4809A IMPRES Li-Ion, 2850mAh, IP68, Slim Battery The Motorola PMNN4809A is an IMPRES Li-Ion battery with a 2850mAh capacity, designed to provide more energy while being thinner and lighter than previous models. Powered by new generation high energy density lithium cells, this battery delivers over 25 hours of talk time when used with the MOTOTRBO R7 radio series. The Motorola PMNN4809A is the updated version of the Motorola PMNN4809. With its IP68 rating and the IMPRES Self Calibration feature, the Motorola PMNN4809A is built for reliable performance and optimized battery life. It maximizes talk time and extends the battery life cycle by up to 43% longer than a standard battery, providing a durable and efficient power source for your R7 and R7A radios. Key Features IMPRES Li-Ion Technology: Maximizes talk time and extends the battery life cycle with IMPRES Self Calibration. 2850mAh Capacity: Provides over 25 hours of talk time when used with the R7 radio series. IP68 Rating: Offers protection against dust ingress and water immersion. Slim Design: Thinner and lighter due to new generation high energy density lithium cells. IMPRES Self Calibration: Allows for quick charging without the need for monthly reconditioning. Physical Specifications: Measures 55.58mm(W) x 17.15mm(H) x 116.3mm(L) and weighs 137g. Compatibility R7 R7A Benefits Extended Operational Time: High capacity ensures your radio stays powered for long periods, with over 25 hours of talk time. Uncompromising Durability: IP68 rating provides peace of mind in extreme environmental conditions. Maximized Battery Lifespan: IMPRES technology optimizes battery performance and cycle life, reducing the need for frequent replacements. Dependable Performance: Delivers consistent and stable power, ensuring your radio performs optimally when you need it most. Convenient and Efficient: The slim and light design, combined with IMPRES Self Calibration, provides a convenient and efficient power solution.   Warranty 1-year manufacturer's warranty

Read more less

Hytera HYT-5116000063632A TC320 Replacement PTT Cover - Orange The Hytera HYT-5116000063632A is the original replacement PTT (Push-to-Talk) cover for the Hytera TC320 portable two-way radio. This cover is made from Orange PC+ABS C1200HF (RoHS) material and is also referenced as part number 6000735000020.   Key Features Type: Replacement PTT Cover    Compatibility: Hytera TC-320    Color: Orange Material: PC+ABS C1200HF (RoHS)    Compatibility Hytera TC320 Benefits Genuine Hytera Part: Ensures proper fit and function. Easy Replacement: Simple to install. Durable Material: Made from robust PC+ABS.    Enhanced Visibility: Bright orange color. Warranty 1-year manufacturer's warranty.

Read more less

Motorola PMLN7559A Motorola PMLN7559A, Carry Holster, DP3441e Holster, DP3661e Holster, Two-Way Radio Holster, Swivel Belt Clip The Motorola PMLN7559A swivel carry holster is a practical and reliable accessory for professionals using the Motorola DP3441 or DP3661 portable two-way radios. Its secure design ensures your radio is held firmly in place, while the swivel belt clip allows for comfortable carrying and easy access to your device. This holster is ideal for those who need to keep their radios within reach at all times, providing both convenience and protection. Key Features: Swivel Belt Clip for Comfortable Carrying and Easy Access Securely Holds Motorola DP3441 and DP3661 Radios Durable Construction Lightweight and Compact Design 1-Year Warranty Compatibility: This carry holster is compatible with the following Motorola two-way radios: Motorola DP3441 Motorola DP3661 Product Warranty: 1-year manufacturer's warranty.

Read more less

Desktop Microphone for Mobile and Base Radios The Icom SM26 is a versatile desktop microphone designed for use with a wide range of Icom mobile and base station radios, as well as repeaters. It features a monitor switch and a built-in pre-amplifier, ensuring robust and clear audio transmission for your communications. This microphone is an ideal accessory for enhancing the audio quality and operational convenience of your Icom radio system, providing clear voice pickup and reducing background noise for crisp communication in any desktop setup. Key Features Unidirectional Dynamic Microphone: Optimized to pick up sound primarily from one direction, focusing on your voice and reducing background noise. Built-in Pre-amplifier: Boosts audio levels for strong and clear transmission. Monitor Switch: Provides convenient control for monitoring audio. Compact Dimensions: Measures 70 (W) x 169 (H) x 167 (D) mm, fitting easily on any desk. Lightweight Design: Weighs 390g, making it easy to position and handle. 300 mm Cable Length: Provides adequate connection reach for desktop use. Compatibility F9511HT F9511 F9521 F5360D F6360D F5061D F6061D F5062D F6062D F5220D F6220D F5121D F6121D F5122D F6122D F5123D F6123D FR5300 FR6300 FR5000 FR6000 FR5100 FR6100 FR5200H FR6200H F5130D F6130D F5061 F6061 F5062 F6062 F5063 F6063 F5021 F6021 F5022 F6022 F5023 F6023 F5023H F6023H F5026 F5026H F5011 F6011 F5012 F6012 F5013 F6013 F5013H F6013H A120 A220 A110 CY5300 CY6300 VEPG4 IP100FS IAS X-Band 50 Benefits Clear Audio Transmission: Unidirectional microphone and pre-amplifier ensure your voice is transmitted clearly, even in noisy environments. Enhanced Operational Convenience: Desktop design allows for hands-free communication, improving efficiency during prolonged use. Versatile Compatibility: Works with a broad range of Icom mobile radios and repeaters, making it a flexible solution for various setups. Improved Sound Quality: Delivers professional-grade audio, crucial for reliable communication. Stable Placement: Desktop form factor provides a steady platform for consistent microphone positioning.   Warranty 1-year manufacturer's warranty

Read more less

Stubby Portable Radio Antenna (UHF 440-470 MHz) The Motorola AAM23X502, also known as the ATU-20DS, is a compact and durable stubby antenna designed for portable two-way radios operating within the 440-470 MHz UHF frequency band. This antenna is engineered for professionals who require reliable, seamless communication in a low-profile, highly portable form factor. Featuring an SMA-FEMALE mounting style, the Motorola AAM23X502 provides a secure fit to compatible portable radios, including the EVX-S24, EVX-261, and EVX-534 models. Its compact design enhances user comfort and portability while ensuring efficient signal transmission and reception. Key Features UHF Frequency Range: Optimized to operate efficiently within the 440-470 MHz band for strong signal performance. Stubby, Compact Design: Provides a low-profile carrying solution, enhancing portability and minimizing the chance of damage compared to longer antennas. SMA-FEMALE Mounting Style: Features a secure threaded connector for reliable attachment to the radio chassis. Durable Construction: Built to withstand tough daily use and environmental conditions for long-lasting performance. Non-GPS Integrated: Note that this antenna model does not include integrated GPS functionality. Compatibility EVXS24 EVX261 EVX534 Benefits Enhanced Portability: The compact, stubby design makes the radio easier to carry and less likely to snag on clothing or equipment. Reliable Communication: Ensures clear and dependable signal quality within the specified UHF frequency range. Versatile Usage: Compatible with various EVX series radios, offering flexibility for fleet deployment. Secure and Simple Attachment: SMA-FEMALE connector provides a reliable fit, maintaining the radio's environmental seal. Warranty 1-year manufacturer's warranty

Read more less

Icom HM222H Waterproof Handheld Speaker Microphone IP68 waterproof handheld speaker microphone with emergency switch and 3.5mm accessory jack. 14-pin connector. For IC-F52D, IC-F62D, IC-F7010/20/40, IC-F3400D/4400D, IP730D/740D, and IC-SAT100. The Icom HM222H is a rugged, IP68-rated waterproof handheld speaker microphone built for professionals who require reliable voice communication in demanding field environments. An integrated emergency switch provides rapid access to critical radio functions, while the 3.5mm accessory jack supports connection of compatible earpieces or headsets. A 14-pin connector ensures a secure, stable attachment to compatible Icom portable radios. Key Features & Benefits IP68 Waterproof & Dustproof: Fully submersible and sealed against dust for reliable performance in rain, wet conditions, and hazardous environments. Emergency Switch: Dedicated switch for rapid access to emergency radio functions when it counts. 3.5mm Accessory Jack: Connect compatible earpieces or headsets for discreet or hands-free audio. 14-Pin Connector: Secure attachment and full feature access on compatible Icom radios. Loud, Clear Audio: Speaker optimized for intelligibility in high-noise environments. Durable Construction: Rugged housing built to withstand the demands of daily professional use. Specifications Attribute Details Brand Icom Model / SKU HM222H Type Handheld Speaker Microphone Connector 14-Pin Accessory Jack 3.5mm Ingress Protection IP68 (Waterproof & Dustproof) Emergency Switch Yes Country of Origin Japan Compatibility Model Details IC-F52D, IC-F62D Icom F Series IDAS Digital IC-F7010, IC-F7020, IC-F7040T/S Icom F7000 Series P25 IC-F3400D, IC-F4400D Icom F Series IDAS Digital IP730D, IP740D Icom IP Series (PoC) IC-SAT100 Icom Satellite PTT Recommended Accessories Icom SP27 Acoustic Tube Earpiece — 3.5mm acoustic tube earpiece compatible with the HM222H accessory jack. Icom SP29 — Compatible earpiece for use with the HM222H 3.5mm accessory jack. Icom SP40 Listen-Only Earphone — Listen-only earphone designed specifically for the Icom HM222 series. Frequently Asked Questions Is the HM222H UL rated? No. The Icom HM222H is not UL listed. It carries an IP68 ingress protection rating for waterproofing and dustproofing, but it does not hold a UL certification. If your application or facility requires UL-listed accessories, please verify compliance requirements with your safety officer before purchasing. Is the HM222H intrinsically safe for use in hazardous locations? No. The HM222H is not intrinsically safe (IS) and is not approved for use in hazardous locations classified under NEC Article 500 or ATEX/IECEx standards — such as environments with flammable gases, vapors, or combustible dusts. For hazardous location use, consider the Icom HM184HUL, which is designed for intrinsically safe applications. Consult your safety officer or a certified hazardous location specialist to confirm the correct accessory for your environment. What is the difference between IP68 and intrinsic safety? IP68 is an ingress protection rating that indicates the device is sealed against dust and can withstand submersion in water — it does not address ignition risk in explosive atmospheres. Intrinsic safety (IS) is a separate certification that ensures the device cannot produce sufficient electrical or thermal energy to ignite a flammable atmosphere under normal or fault conditions. The HM222H meets IP68 but is not IS-rated. Warranty 1-year manufacturer’s warranty.

Read more less

VHF (150-174MHz) Flexible Antenna High-Performance Screw-Type Marine and Land Mobile Communication Solution The Icom FASC58V is a professional-grade VHF flexible antenna specifically engineered for high-reliability maritime and land mobile communications. Operating within the 150-174 MHz frequency range, this antenna is designed to provide optimal signal resonance for Icom’s premier M-series handheld radios. The Icom FASC58V features a 163 mm (6.375 inch) thin metal rod construction, meticulously wound with a precision wire helix. This internal loading coil effectively increases the electrical length of the antenna, significantly boosting performance and gain at the lower end of the VHF spectrum where critical marine channels reside. Built to withstand the harsh conditions of saltwater environments and industrial job sites, the Icom FASC58V utilizes a robust MXI screw-type connector. This threaded interface ensures a watertight, vibration-resistant bond with the radio chassis, maintaining electrical integrity even under heavy physical duress. Its flexible design allows the antenna to bend and recover without permanent deformation, reducing the risk of connector damage when the radio is worn on a belt. By utilizing the genuine Icom FASC58V, operators ensure their equipment meets factory-tuned specifications for Voltage Standing Wave Ratio (VSWR), protecting the radio's internal power amplifier from damage caused by signal reflection. Whether deployed for professional maritime safety or land-based coordination, this antenna is the definitive choice for clear, extended-range VHF communication. Key Features & Benefits Optimized VHF Coverage: Tuned for the 150-174 MHz band, providing superior performance for marine and commercial VHF frequencies. Helical Loading Coil: The internal wire-wound design improves electrical efficiency, offering better range than standard non-loaded antennas. Flexible Durability: The Icom FASC58V is designed to flex and move with the user, preventing breakage and enhancing all-day comfort. MXI Screw-Type Connector: Provides a secure, threaded connection that minimizes signal loss and prevents accidental detachment. Weather-Resistant Build: Engineered for the rigors of marine use, featuring a rugged overmold that resists UV rays and saltwater corrosion. Compact Profile: At 163 mm in length, it offers a balanced footprint that provides excellent gain without being excessively obtrusive. Specifications Brand: Icom Part Number: FASC58V Frequency Range: 150–174 MHz Connector Type: MXI (Screw-type) Length: 163 mm (6.375 inches) Antenna Type: Flexible Helical Whip Color: Black Compatibility M23 M24 M33 M34 M35 M36 M85 M85E M85UL Recommended Accessories High-Capacity Li-Ion Battery (BP290) Rapid Desktop Charger (BC227) Waterproof Speaker Microphone (HM222) What's Included Icom FASC58V VHF Flexible Antenna Frequently Asked Questions Is this antenna waterproof? While the antenna itself is weather-resistant, the waterproof integrity depends on the gasket seal between the Icom FASC58V and the radio. Can I use this for the 400 MHz UHF band? No, the Icom FASC58V is strictly a VHF antenna. Using it on a UHF radio can cause permanent damage to the transmitter. How do I install the antenna? Simply align the MXI screw-type threads and rotate clockwise until the antenna is finger-tight against the radio body. Warranty 1-year manufacturer's warranty

Read more less

Bluetooth Ear-Bud Style Headset with Lapel PTT Wireless Freedom and Hands-Free Communication for Mobile Fleets Unchain your communication setup from restrictive cables with a premium, low-profile Bluetooth earpiece equipped with full remote control integration. The genuine Icom VS3 is a commercial-grade Icom VS3 Bluetooth Earpiece with PTT for F52D portable and mobile transceivers engineered to deliver complete wireless operational mobility. Integrating the Icom VS3 into your communications configuration enables field agents, drivers, and supervisors to maintain uninterrupted hands-free voice operations without being tethered by a physical radio cable. This intelligent earbud assembly utilizes advanced Bluetooth protocols to stream robust, bidirectional audio over extended distances. Perfect for administrative dispatch centers, warehousing supervisors, event logistics planners, and aviation professionals operating ground layouts, the Icom VS3 resolves the classic issue of snagged accessory wires disrupting physical movement. The core control housing clips cleanly onto a uniform collar or lapel, putting a tactile, oversized push-to-talk (PTT) key directly at your fingertips. For special multi-role deployment scenarios, this low-profile headset layout can even be worn comfortably underneath heavy passive hearing protection cups inside high-noise cockpits or industrial industrial floor zones. The integrated device interface comes loaded with standalone volume toggles and audio play track buttons (Pause, Play, Forward, Rewind) that double as remote logic selectors when linked to a smart cellular device or multi-profile transceiver. An onboard multi-state LED tracking lamp offers instant visual verification of power levels and successful pairing loops. To safeguard long-term internal lithium polymer battery health, always charge the pendant piece with the factory-certified micro-USB power interface line and avoid letting the device rest completely drained for long operational intervals. Key Features & Benefits Wireless Audio Mobility: Functions as an optimized Icom VS3 Bluetooth Earpiece with PTT for F52D node to break free from restricting accessory cables. Integrated Lapel PTT Matrix: Combines a tactile push-to-talk key with independent volume and multimedia controls inside a single compact clip-on shell. Universal 3.5mm Receiver Port: Uses a standard auxiliary receiver jack connection to host the bundled high-fidelity single earbud tip comfortably. Dual-Device Connectivity Engine: Supports seamless cross-platform pairing to bridge communications across professional transceivers and mobile devices simultaneously. Micro-USB Charging Port Interface: Utilizes a standard, easily accessible charging link to replenish the internal long-life cell battery between operational shifts. Specifications Attribute Details Brand Icom Model/SKU Icom VS3 (VS3) Product Type Bluetooth Earpiece Headset with PTT Bluetooth Version Version 3.0 (Class 1) Supported Profiles HFP, HSP, A2DP, AVRCP Audio Jack Port 3.5mm Output Interface Charge Interface Micro-USB Terminal Estimated Runtime Up to 11 Hours Weight 31.1 Grams (1.1 oz) Color Black Compatibility F52D F62D 2730A ID5100A 705 ID52A A16 A25 A120 F7010 F7020 F7040 F7510 F7520 F7540 IPM60 IP501H IP501M IP504H IP730D IP740D SAT100 SAT100M IP110H Recommended Accessories Icom F52D Handheld Portable Digital Radio (F52D) — The compact, next-generation digital transceiver built with full onboard Bluetooth capability to run this earpiece. Icom A16 Aviation Handheld Transceiver (A16) — A high-power VHF air band portable radio that natively pairs with this wireless headset. More Resources Guide to Commercial Earpieces and Audio Accessories Frequently Asked Questions Can I use this Bluetooth earpiece with my smartphone and two-way radio at the same time? Yes, the Icom VS3 utilizes multi-profile pairing technologies that allow it to link concurrently with your Bluetooth-enabled transceiver and a secondary smart mobile device to manage phone calls. What functions do the forward, rewind, and pause buttons serve? When paired with an Android or iOS mobile device, these keys operate as standard media controls. When connected to a matching Icom transceiver, they can function as customizable remote programmable switches to cycle system properties. Does this device require an adapter to connect the bundled earbud? No, the control capsule has a standard built-in 3.5mm audio jack output port. The included SP-42 earbud wire plugs straight into this receptacle interface, creating a secure connection instantly.   Warranty 1-year manufacturer's warranty.

Read more less

Icom FAS67VC VHF Cut-Type Flexible Antenna | 136–174 MHz | SMA-F Full-band VHF coverage in a durable, field-ready flexible rubber form factor. The Icom FAS67VC is a cut-type flexible rubber VHF antenna covering the full 136–174 MHz band, engineered for use with Icom F3400D, F7010, and F9011 series portable two-way radios. Unlike fixed-frequency stubby antennas, the FAS67VC is a cut-type design that can be trimmed to optimize performance at a specific frequency within the VHF band, making it well-suited for agencies and fleets that operate on a single licensed channel or narrow frequency range. Its flexible rubber construction resists bending and impact in demanding field environments, while the SMA-F connector provides secure, tool-free installation on compatible Icom portables. At 6.9 inches, it offers a practical balance between antenna gain and portability. Key Features & Benefits Full VHF Band Coverage (136–174 MHz): Compatible with the complete VHF land mobile band used by public safety, government, and commercial fleets. Cut-Type Design: Can be trimmed to optimize resonance at a specific operating frequency within the 136–174 MHz range for improved RF performance. Flexible Rubber Construction: Withstands bending, impact, and field abuse without cracking or breaking. SMA-F Connector: Secure, tool-free installation on compatible Icom F3400D, F7010, and F9011 series portables. Compact 6.9" Profile: Practical field length balancing antenna gain and ease of carry. Specifications Attribute Details Brand Icom Model / SKU FAS67VC Type Cut-Type Flexible Rubber Antenna Frequency Range 136–174 MHz (VHF) Connector SMA-F (Female) Length 6.9 inches Country of Origin Japan Compatibility Model Series F3400D / F3400DS / F3400DT Icom F3400D Series F7010S / F7010T Icom F7010 Series F9011B / F9011S / F9011T Icom F9011 Series What's Included Description SKU / Model Status VHF Cut-Type Flexible Antenna FAS67VC Included Compatible Portable Radio — Sold Separately Frequently Asked Questions What does "cut-type" mean for this antenna? A cut-type antenna is designed to be physically trimmed to a specific length to optimize its resonant frequency within the rated band. For the FAS67VC, this means you can tune it for peak performance at your licensed VHF frequency within the 136–174 MHz range. This is particularly useful for public safety and commercial fleets operating on a single channel or narrow frequency range. What connector does the FAS67VC use? The FAS67VC uses an SMA-F (female) connector, which is the standard antenna connector on compatible Icom F3400D, F7010, and F9011 series portables. Can this antenna be used on UHF radios? No. The FAS67VC is a VHF antenna rated for 136–174 MHz and is not compatible with UHF radios. For UHF Icom portables, a UHF-rated antenna with the appropriate frequency range is required. Is this antenna compatible with the Icom F4400D? No. The F4400D is a UHF radio and requires a UHF antenna. The FAS67VC is designed for VHF models including the F3400D and F7010S / F7010T. Warranty 1-year manufacturer's warranty.

Read more less

Belt Clip for Remote Speaker Microphones The Motorola 4205823V01 is a replacement belt clip designed for various Motorola remote speaker microphones (RSM). This durable clip ensures that your RSM remains securely attached to your belt, providing convenient access and preventing accidental drops.    Key Features Secure Attachment: Provides a firm and reliable hold for your RSM. Durable Construction: Built to withstand daily wear and tear. Dimensions: 0.38" (W) x 1.5" (H) x 0.88" (L)    Compatibility APX1000 APX3000 APX4000 APX4000XH APX6000 APX6000XE APX7000 APX7000XE APX8000 APX8000XE DGP5050E DP4400E DP4401E DP4600E DP4601E DP4800E DP4801E EVOLVE ION LEXL11 R7 R7A SL7550 SL7580 SL7590 SRX2200 TLK100 TLK150 XIR P8600I XPR3300 XPR3300E XPR3500 XPR3500E XPR6350 XPR6380 XPR6550 XPR6580 XPR7350 XPR7380 XPR7380E XPR7550 XPR7580 XIRP8808R Benefits Secure Carry: Keeps your RSM securely attached to your belt for easy access. Prevents Loss: Reduces the risk of accidentally dropping or losing your RSM. Durable: Provides long-lasting performance in demanding environments.   Warranty 1-year manufacturer's warranty

Read more less

Powerful 7.5W External Speaker for Mobile Radios The Motorola HSN8145 External Speaker is designed to enhance audio clarity and volume for mobile radio users. Delivering 7.5 watts of power, this external speaker ensures clear and loud communication even in noisy environments, making it an essential accessory for professionals on the go. The Motorola HSN8145B is the updated version of the Motorola HSN8145A and Motorola HSN8145. Key Features Enhanced Audio Clarity: Provides loud and clear sound, perfect for high-noise environments. 7.5W Output Power: Delivers robust audio performance for reliable communication. Durable Build: Designed to withstand rugged conditions and heavy usage. Compact Design: Easy to install and fits seamlessly into vehicle setups. Compatibility CM200D CM300D CM340 CM360 DEM300 DEM400 DEM500 DM1400 DM1600 DM2600 GM3188 GM3189 GM338 GM339 GM340 GM3688 GM3689 GM380 GM398 GM399 PRO3100 PRO5100 PRO7100 XIRM3188 XIRM3688 XIRM3988 XIRM6660 XPR2500 Benefits Improved Communication: Ensures your radio audio is clear and audible in any environment. Ease of Use: Enhances the functionality of your mobile radio system. Durable and Reliable: Built to last in tough working conditions. Versatile Application: Ideal for use in vehicles, control rooms, or other mobile setups. Warranty 1-year manufacturer’s warranty.

Read more less

High-Power Analog Mobile Transceivers for Commercial Fleets Deploy rugged vehicular voice communications engineered to outlast demanding job site conditions. The Icom F5021 and Icom F6021 mobile transceivers provide dependable, high-power conventional analog communication for transport, utility, and construction teams. Integrating either the VHF Icom F5021 or the UHF Icom F6021 mobile transceivers into your daily operations ensures your mobile workforce stays fully connected across expansive project properties. Featuring a front-mounted 4-watt speaker, these transceivers deliver loud and crystal-clear voice paths that easily pierce through heavy engine noise and ambient warehouse environments. Built on a tough aluminum die-cast chassis with a high-impact polycarbonate front panel, these vehicle platforms meet rigorous military environmental testing standards. Operators can easily navigate up to 128 channels divided across 8 memory zones utilizing the clear 8-character alphanumeric display and six front programmable keys. Choosing the genuine Icom F5021 or Icom F6021 series provides flexible scanning features, built-in multi-tone signaling, and long-term fleet compatibility with existing conventional analog systems. Key Features & Benefits High-Power Transmission: The Icom F5021 and Icom F6021 mobile transceivers deliver up to 50 Watts on VHF or 45 Watts on UHF bands for extensive signal coverage areas. Front-Mounted Speaker: Built with a front-facing 4-watt audio speaker that projects crisp, unhindered sound directly toward the driver or dispatch operator. Military-Grade Durability: Tested to MIL-STD 810F specifications to ensure your hardware remains operational under extreme vehicle vibration, temperature shock, and low pressure. Advanced Signaling Suite: Features integrated 2-Tone, 5-Tone, CTCSS, and DTCS capabilities as standard to set up your own custom talk groups and silent stand-by options. MDC 1200 Compatibility: Supports critical fleet dispatch functions including PTT ID tracking, radio check diagnostics, emergency transmission routing, and over-the-air radio stun, kill, or revive commands. Lone Worker Safety: Sounds an audible alert beep when the unit is left inactive for a preset period, automatically transmitting an emergency signal if the operator fails to respond. Specifications Attribute Details Brand Icom Model/SKU F5021 / F6021 Channel Capacity 128 Channels / 8 Zones Front Audio Output 4 Watts typical Power Supply Voltage 13.6V DC Current Drain TX 14.0 Amps maximum Chassis Material Aluminum Die-Cast Durability Rating MIL-STD 810F Body Dimensions 5.91 x 1.57 x 6.59 Inches Total Base Weight 2.4 pounds Model Variations Model Key Difference Compatibility F5021 VHF 136-174MHz Band and 50W Output Power Standard 13.6V DC Mobile Systems F6021 UHF 400-470MHz or 450-512MHz Band and 45W Output Power Standard 13.6V DC Mobile Systems Compatibility VHF (F5021) and UHF (F6021) Analog Modes What’s Included Description SKU/Model Status Standard Handheld Microphone HM-152 ✅ Included DC Vehicle Hardwire Power Cable OPC-1132 ✅ Included Mobile Vehicle Mounting Bracket Kit Standard-Bracket ✅ Included Microphone Dashboard Hanger Hook Standard-Hanger ✅ Included Key Assignment Function Stickers Function-Stickers ✅ Included Customer Programming Software Suite CPS-Software ✅ Included Recommended Accessories Icom SP35 External Mobile Vehicle Speaker – High-performance 5W compact speaker that connects directly via a 3.5mm jack to enhance cabin audio clarity. Icom SP30 Large External Communication Speaker – Heavy-duty 20W high-output external speaker optimized for clear voice processing on demanding job sites. Icom OPC1939 D-SUB 15-Pin Accessory Cable – Specialized interface adapter cord enabling external channel controls and ignition-sensing configurations. Icom HM152T DTMF Handheld Microphone – Alternative mobile hand microphone assembly featuring a full 16-key dual-tone multi-frequency dialing pad. More Resources How to Connect a Radio to a Battery Safely (Car and Mobile Install Basics) Icom F5021/F6021 Data Sheet Frequently Asked Questions What is the main frequency difference between these two mobile models? The F5021 configuration operates exclusively on VHF bands from 136 to 174MHz at 50 Watts, whereas the F6021 configuration handles UHF frequencies from 400 to 470MHz or 450 to 512MHz at 45 Watts. Do these mobile models support digital networks like IDAS or P25? No, these specific models are built strictly for high-performance conventional analog networks and include standard analog selective calling squelch protocols. How does the built-in Lone Worker safety feature function? If the transceiver is not operated for a preset period, it emits a warning tone. If a button is not pressed within a set wait time, it automatically transmits an emergency alert signal to dispatch. Can I program channel frequencies directly from the front display screen? No, custom frequencies, alphanumeric naming labels, privacy tones, and key assignments must be uploaded utilizing specialized programming software connected to a computer interface cord. Is an external speaker required for standard in-cab fleet deployment? While the front-mounted 4-watt speaker delivers loud, direct voice projection, installing a dedicated external vehicle speaker is recommended for heavy industrial trucks or loud machinery cabs. What standard manufacturer warranty applies to this mobile hardware series? This commercial analog mobile transceiver series includes standard factory warranty protection to guarantee technical reliability and operational safety throughout your fleet deployment.   Warranty 2-year manufacturer’s warranty.

Read more less

IMPRES 2 High-Capacity Submersible Intrinsically Safe Battery Genuine Motorola Solutions 3100 mAh Li-Ion rechargeable battery featuring advanced IMPRES 2 smart energy management, IP68 submersibility, and TIA4950 UL hazardous location certification. The Motorola PMNN4547A (catalog part PMNN4547 / PMNN4547A) is an authentic original equipment manufacturer (OEM) mission-critical Lithium-Ion rechargeable power pack engineered for Motorola APX and SRX series portable transceivers. Built for first responders, tactical military teams, petrochemical refinery personnel, and utility workers operating in volatile or severe environmental conditions, this heavy-duty battery provides a substantial 3100 mAh nominal capacity to power high-wattage P25 transmissions across extended 12- to 16-hour work shifts. Engineered for extreme survivability, the Motorola PMNN4547A is certified to TIA4950 (UL) Division 1 hazardous location (HAZLOC) standards, preventing electrical spark or thermal ignition in atmospheres containing flammable gases, vapors, or combustible dusts. It carries a ruggedized IP68 ingress protection rating, allowing it to withstand complete water submersion up to two meters (6.6 feet) for four consecutive hours. Powered by Motorola's advanced IMPRES 2 energy architecture, the battery communicates automated diagnostic telemetry—including internal cell health, true charge status, and lifetime charge cycles—directly to IMPRES chargers. Operating in full compliance with commercial and public safety FCC Licensing standards, the PMNN4547A delivers unmatched thermal stability down to -20°C (-4°F) for dependable frontline readiness. Key Features & Benefits TIA4950 UL Intrinsic Safety Rating: Certified intrinsically safe for hazardous locations (HAZLOC), ensuring safe deployment in petrochemical, refinery, and explosive gas environments. IP68 Submersible Sealing: Hermetically sealed housing withstands complete submersion in up to 2 meters (6.6 feet) of water for 4 continuous hours. High-Capacity 3100 mAh Energy Density: Delivers extended runtimes for multi-shift duty cycles and high-power digital P25 trunked communications. IMPRES 2 Smart Energy Management: Extends overall battery lifespan by up to 60% compared to standard lithium cells while providing real-time health and cycle telemetry. Extreme Cold-Weather Performance: Specially formulated lithium chemistry maintains stable voltage output and dependable capacity in sub-zero environments down to -20°C. Ruggedized Structural Housing: High-impact polymer casing and reinforced mechanical latching rails endure heavy drops, vibrations, and severe field abuse. Specifications Attribute Details Brand Motorola Solutions Model / SKU PMNN4547A / PMNN4547 Product Type Rechargeable Portable Radio Battery Pack Chemistry Lithium-Ion (Li-Ion) Nominal Capacity 3100 mAh (Typical) Intrinsic Safety Rating TIA4950 (UL) Certified Intrinsically Safe (HAZLOC) Ingress Protection IP68 (Submersible up to 2 meters for 4 hours) Smart Technology IMPRES 2 Intelligent Energy Management Operating Temperature -20°C to +60°C (-4°F to +140°F) Dimensions (W x H x L) 1.00 x 3.38 x 2.00 in (25.40 x 85.85 x 50.80 mm) Weight Approx. 0.55 lbs (249.5 g) Housing Material High-Impact Ruggedized Polymer Color Finish Matte Black with Intrinsically Safe Dot Marking Compatibility Compatible Motorola Portable Two-Way Radios APX5000 APX6000 APX6000LI APX6000XE APX8000H APX8000HSRX APX8000HXE SRX2200 Recommended Accessories Carrying Solutions & Holsters Motorola PMLN7732A APX Series Universal Carry Holster w/ 3.5" Belt Loop – Rugged snap-in carry holster engineered for turnout gear and tactical duty belts. Microphones & Audio Accessories Motorola PMMN4046AL IMPRES IP57 Remote Speaker Microphone – Heavy-duty submersible remote palm microphone with volume controls and an emergency button. Motorola PMLN5101A IMPRES Temple Transducer Bone Conduction Headset – Behind-the-head bone conduction headset for high-noise and tactical environments. Programming Cables Motorola PMKN4012B Portable Radio USB Programming Cable – Direct GCAI side-connector USB interface cable for APX CPS configuration and firmware flashing. More Resources How To Care for and Maintain Portable Radios Browse All Two-Way Radio Batteries Browse All Motorola Two-Way Radios & Accessories Frequently Asked Questions What does the TIA4950 UL intrinsic safety certification mean? The TIA4950 (UL) certification designates that the PMNN4547A battery is engineered and tested to prevent internal electrical arcing, sparks, or thermal surface temperatures that could ignite explosive gases, vapors, dust, or fibers in hazardous locations (HAZLOC Class I, II, and III, Division 1). To maintain certified intrinsic safety, the battery must be paired with an approved TIA4950-certified APX radio chassis. What are the advantages of Motorola IMPRES 2 technology? IMPRES 2 represents Motorola's next-generation battery management system. When used with IMPRES 2 chargers, it increases overall battery charge cycle life by up to 60%, eliminates the memory effect without requiring manual conditioning, and transmits comprehensive diagnostic telemetry (including cycle counts, exact health percentage, and remaining capacity). What does the IP68 rating mean for this battery? An IP68 rating confirms that the battery is completely dust-tight and submersible in fresh water up to a depth of two meters (6.6 feet) for up to four hours without water breaching internal seals or compromising terminal connections. Can the PMNN4547A be charged in older, first-generation IMPRES chargers? Yes. The PMNN4547A is backward compatible with first-generation Motorola IMPRES single-unit and multi-unit chargers (provided the charger firmware is updated to recognize IMPRES 2 profiles), though maximum charging speed and advanced diagnostic features are best achieved using native IMPRES 2 charging systems. How does this battery perform in freezing temperatures? The PMNN4547A features an engineered sub-zero lithium electrolyte chemistry rated down to -20°C (-4°F), maintaining steady voltage delivery and preventing sudden shutdown in winter conditions.   Warranty 1-year manufacturer’s replacement warranty.

Read more less

Replacement Volume Control Dial for Professional Portable Radios Restore Precise Audio Control Reestablish immediate and responsive volume adjustment on your fleet's hand-held transceivers. The Motorola 3680529Z01 Replacement Volume Knob is a genuine original equipment manufacturer (OEM) component designed to maintain factory-spec performance on commercial portable two-way radios. Molded from an impact-resistant industrial black polymer, this heavy-duty dial directly replaces lost, cracked, or degraded volume control interfaces, ensuring clear tactile feedback when turning the radio power switch or adjusting audio levels in the field. Engineered for public safety personnel, construction foremen, and logistics coordinators, this replacement part prevents common fleet maintenance downtime. Over extended deployments, original dials are subjected to continuous friction and environmental stress, making a secure physical control interface vital for uninterrupted operations. Replacing a worn knob ensures the sensitive internal electronic potentiometer stem remains protected from dust ingress, impact shock, and structural degradation. Key Features & Benefits OEM Precision Engineering: The Motorola 3680529Z01 Replacement Volume Knob provides a perfect factory friction fit on half-round D-shaft potentiometers without slipping. Textured Non-Slip Ridges: Molded with deep external groove contours to facilitate effortless operation even when users are wearing heavy work gloves. Debris Ingress Protection: Forms a structural barrier around the top control stem to seal out fine grit, moisture, and ambient job-site dust. Tool-Free Field Installation: Slides straight onto the existing mechanical radio stem for immediate deployment without requiring specialized repair tools. Industrial Polymer Construction: Built from highly durable matte black plastic that resists cracking, extreme temperatures, and chemical exposure. Specifications Attribute Details Brand Motorola Model/SKU 3680529Z01 Product Type Replacement Volume Knob Material Industrial Plastic Polymer Color Black Installation Style Push-On Friction Fit Compatibility CP200d CP200 CP150 PR400 HT750 HT1250 HT1550 EX500 EX600 XTS1500 XTS2500 DP1400 Recommended Accessories Motorola MOTOTRBO CP200d Portable Two-Way Radio (CP200d) — The primary digital hand-held radio platform engineered to natively host this OEM replacement volume control interface. Frequently Asked Questions Does this product include the internal electronic control switch? No. This item consists of the external molded plastic volume knob dial only. It does not include the internal metal potentiometer shaft, electrical wiring, or internal radio circuit boards. Can this component also be used to replace the channel selector knob? No. The top channel selection dial and the audio volume control knob feature entirely distinct physical internal dimensions and height markings. This item is explicitly molded to fit the half-round volume potentiometer stem. How is this volume knob installed on a portable radio? Installation is completely tool-less. Align the internal flat edge of the replacement knob with the flat side of your radio's metal volume control stem, then press downward firmly until it locks securely into place. Warranty 1-year manufacturer's warranty.

Read more less

Standard-Length Flexible VHF Antenna with J-Type Connector Low-Profile Wideband Communications Equip your Icom portable transceiver with a heavy-duty flexible antenna engineered for optimal VHF signal propagation. The Icom FASC55V VHF Antenna is a high-performance, standard-length flexible antenna designed specifically for the 146–174 MHz VHF frequency range. Engineered for versatility and durability, this antenna features the specialized J-type (thread-less) connector common to Icom’s extensive line of professional land mobile and marine radios. The FASC55V is factory-tuned to provide an optimal balance between transmission gain and reception sensitivity, making it an excellent choice for public safety, industrial, and maritime operators who require consistent wideband performance. Constructed from a high-flexibility rubber compound with a rugged internal helical core, this antenna is built to withstand the intense physical demands of daily field use. Its highly flexible nature allows it to bend and completely recover without breaking or fatiguing, which is essential for users who wear their radios on duty belts, shoulder epaulets, or inside tactical vests. As a genuine OEM accessory, it ensures a secure, weather-resistant fit that maintains the environmental sealing integrity of your portable radio while delivering clear signal path clarity. Key Features & Benefits Optimized VHF Tuning: The Icom FASC55V VHF Antenna is precisely resonant within the 146–174 MHz band for maximum signal efficiency and extended communication range. J-Type Threadless Connector: Features a heavy-duty push-and-twist style connector interface to establish a secure and stable electrical connection with compatible radio bodies. Superior Material Flexibility: The rubberized outer shell protects the internal helical brass core from structural fatigue and snapping during high-intensity physical activity. Extended Signal Reach: Standard length architecture provides superior transmission gain compared to stubby variants, making it ideal for rural or coastal deployments. Genuine OEM Reliability: Specifically engineered to meet the exact electrical tolerances and impedance requirements of Icom's land mobile and marine platforms. Specifications Attribute Details Brand Icom Model/SKU FASC55V Product Type VHF Flexible Antenna Frequency Range 146–174 MHz Connector Type J-Type Antenna Style Standard Flexible Length ~165 mm Core Material Helical Core Color Black Compatibility F1000 F1000D F1000S F1000T F1100 F1100D F1100DS F1100DT F2000 F2000D F3001 F3002 F3003 F3011 F3021 F3022 F3023 F3026 F3032 F3033 F3036 F3101D F3102D F3103D F3201 F3201DEX F3202DEX F3210DF F3230DS F3230DT F3360DF F3360DT F3161 F3161S F3161T F3162DS F3162DT F3163 F3261DF F3261DT F3262DT F52D F11 F11S F12 F12S F14 F14S F15 F15S F16 F3 F3S F3GS F3GT F30 F30GS F30GT F33GS F33GT F34GS F34GT F70 F70S F70T F70DS F70DT IP730D V88 M32 M3A Recommended Accessories Icom F1100D VHF IDAS Digital Portable Radio ( F1100D) — High-performing, rugged VHF transceiver optimized to interface perfectly with this antenna platform. Icom F52D Compact VHF Digital Portable Radio ( F52D) — Ultra-compact commercial radio configuration supporting secure J-type push-and-twist attachments. Icom High-Capacity Li-Ion Battery ( BP280) — High-output rechargeable 2250mAh cell supplying sustained multi-shift power delivery. Icom Rapid Desktop Charger ( BC213) — Dedicated single-unit drop-in base for automated rapid current conditioning. Icom BC219N Rapid Single-Unit Desktop Charger (BC219N) — High-performance rapid rate charging cradle engineered for high-capacity cells used in the F52D portable series. Icom BP-232WP Waterproof Li-Ion Battery (BP-232WP) — Heavy-duty IP67 dust and water-resistant 2300mAh power supply tailored to fit F3230 radio systems. More Resources Guide to Selecting the Right Two-Way Radio Antenna Frequently Asked Questions Is this antenna compatible with the Icom F2000 series? While the F2000 series often operates primarily on UHF bands, it does share the exact physical J-type connector interface. However, the FASC55V is specifically a VHF antenna, meaning you should only pair it with your device if your exact radio is a confirmed VHF model variation. How can I verify that my FASC55V is a genuine OEM Icom part? Authentic Icom antennas are manufactured with precision-molded connector bases, heavy-gauge strain reliefs, and premium weather-sealing compound rings. Deploying non-genuine or aftermarket components can lead to poor signal propagation and may permanently damage your transceiver's power amplifier stage. What is the primary operational difference between this model and a stubby antenna? This standard flexible antenna features an elongated structural layout that delivers significantly higher signal transmission gain and enhanced reception sensitivity over distance compared to a stubby option, which makes it ideal for rural, expansive, or coastal settings.   Warranty 1-year manufacturer's warranty.

Read more less

Motorola PMLN5072A MOTOTRBO Rear Accessory Connector Kit Essential Interface Kit for Mobile Radios and Repeaters The Motorola PMLN5072A is a specialized hardware service kit designed for the rear accessory port of MOTOTRBO mobile radios and repeaters. This kit provides the necessary components to build custom cables for external accessories, such as foot switches, external speakers, ignition sense, or data interfaces. The Motorola PMLN5072A is the updated version of the Motorola PMLN5072. Specifically engineered for the XPR 5000 series and high-tier MOTOTRBO terminals, this kit ensures a secure, professional-grade connection to the radio’s back panel. It includes a comprehensive set of pins and a removal tool, making it an essential item for technicians and fleet managers who need to integrate mobile radios with vehicle systems or base station peripherals. Key Features Complete Service Kit: Includes everything needed to populate the rear accessory port: connector shell, cable tie, and contact pins. High Pin Count: Comes with 27 solder/crimp pins to support complex wiring configurations and data IO needs. Pin Removal Tool Included: Simplifies maintenance and reconfiguration, allowing pins to be removed safely without damaging the connector shell. Secure Attachment: Includes a dedicated cable tie to provide strain relief, preventing wires from pulling out during vehicle vibration or movement. Genuine Motorola Quality: Designed to match the exact physical specifications of MOTOTRBO mobile housing for a perfect fit and reliable conductivity. Compatibility XPR5350e XPR5380e XPR5550e XPR5580e DGM5500e DGM8000e DGM8500e DM4400e DM4401e DM4600e DM4601e CM7668 CM7668i MTM5200 MTM5400 MTM5500 MXM7000 XIRM8620i XIRM8668i DR3000 Specifications Part Number: PMLN5072A Type: Rear Accessory Connector Kit Components: Connector Shell, 27x Pins, 1x Cable Tie, 1x Removal Tool Application: Mobile Radios and Repeaters Manufacturer: Motorola The PMLN5072A Kit Includes: 1 x 1516174H01 27 x Pins 1 x Pin Insert Tool 1 x White Zip Tie Benefits Custom Integration: Enables the creation of bespoke wiring solutions for emergency vehicle sirens, lights, or dispatch consoles. Professional Maintenance: The included removal tool allows for easy repairs or pin swaps without replacing the entire connector. Reliability: Built-in strain relief ensures that critical connections remain active even in rough, off-road vehicle environments. Warranty 1-year manufacturer's warranty.

Read more less

Accessory Dust Cover for Radio Port Protection Protect your multi-pin accessory connector from moisture and debris with a genuine factory cover. The Icom MP65 is a heavy-duty defensive component engineered for hazardous and unpredictable service environments. This authentic Icom MP65 Accessory Dust Cover for F52D acts as a barrier to shield the exposed multi-pin side chassis terminal when communication gear is detached. Keeping the 8210032940 securely locked down prevents unexpected audio dropouts and hardware faults, ensuring the long-term operational integrity of your handheld terminal fleet. Engineered specifically for public safety, maritime, and demanding industrial job sites, the Icom MP65 addresses the persistent issue of physical connection fouling. This structural cap effectively seals out environmental particulates, mud, and water splash that lead to contact oxidation. Fleet administrators must know that this 8210032940 cap is an individual replacement part that does not include mounting hardware; securing it to the frame requires separate attachment screws. Without this safety piece, empty electronic contacts are left vulnerable to impact or sweat accumulation during intensive field shifts. The low-profile composition of the Icom MP65 matches the industrial contours of compatible handheld series perfectly, maintaining a snag-free design during mobile belt carry. Key Features & Benefits Environmental Port Guarding: The Icom MP65 Accessory Dust Cover for F52D stops dust particles and moisture from settling inside open side multi-pin chassis layouts. OEM Contact Security: Form-fitted structural molding matches official frame specs perfectly to retain factory environmental ratings. Corrosion Defensive Material: Safeguards critical gold-plated pins from chemical exposure, industrial grease, and saltwater spray. Snag-Resistant Molding: Low-profile outer finish ensures the radio assembly slides easily into standard tactical chest rigs or holsters. Cost-Effective Fleet Care: Prevents terminal face re-wiring costs by shielding sensitive interior schematics from external impacts. Specifications Attribute Details Brand Icom Model/SKU MP65 (8210032940) Product Type Accessory Dust Cover Material High-Impact Composite polymer Color Black Attachment Type Chassis Screw-On Compatibility M85 F52D F62D Recommended Accessories Icom MP66 Attachment Screws — Crucial dual-screw mounting kit required to physically lock down the side cover onto the housing tracks.  Icom F52D Compact Digital Portable Radio — High-tier handheld transceiver featuring the native multi-pin interface slot for this plate.  MP66 (8810010771) for the required screws. Frequently Asked Questions Does the Icom MP65 come equipped with mounting screws? No, the Icom MP65 is supplied strictly as the single plastic port cover component. To lock it securely to the body of your portable transceiver, you must purchase the factory attachment screws separately under part number MP66 (8810010771). Which specific radio lines will this chassis plate fit? This port guard is molded to match the physical chassis dimensions of the M85, F52D, and F62D models. It is not universal and cannot be fitted to broader commercial land mobile or aviation series units due to differing pin array sizes. Is this cover essential if I do not use external speaker microphones? Yes, keeping this terminal port covered is critical to preventing contact corrosion and pin distortion. Leaving the socket bare exposes underlying operational pathways to sweat, water droplets, and physical impact during standard shift workflows.   Warranty 1-year manufacturer's warranty.

Read more less

IP68 Waterproof Speaker Microphone for Heavy-Duty Operational Marine Environments Maximize Voice Clarity and Survival Under Extreme Environmental Submersion Maximize voice clarity and hardware survival under extreme environmental submersion. The Icom HM222HLWP Speaker Microphone is a genuine original equipment manufacturer (OEM) heavy-duty audio solution engineered for seamless integration with commercial handheld transceivers. Featuring a robust chassis optimized for professional operations, the Icom HM222HLWP functions as a rugged extension of your communication system, delivering loud, clear speaker output and highly responsive voice capture. Equipped with a reliable multi-pin mechanical interface, this accessory ensures absolute connection stability in high-vibration settings. Designed explicitly for maritime crews, industrial construction foremen, and public safety teams, the Icom HM222HLWP resolves the critical risk of hardware failure caused by water ingress. Traditional speaker microphones easily short-circuit when exposed to sea spray or sudden downpours, but the specialized architecture of the Icom HM222HLWP provides complete protection against water intrusion and dense particulate accumulation. An integrated, high-visibility emergency switch sits on the top of the housing, allowing field operators to immediately broadcast a distress alert without having to reach down to access their main belt-mounted radio handset. Before deployment, team leaders must verify that their field assets utilize the matching 2-pin screw-type connector receptacle. The Icom HM222HLWP uses a threaded mechanical attachment base to lock the audio pathways directly into the radio body frame, creating a secure seal that prevents accidental field disconnections. Because it relies heavily on this specialized attachment format, this waterproof microphone layout will not interface with legacy non-threaded push-in ports. Key Features & Benefits IP68 Submersible Waterproofing: Sealed completely against fine dust ingress and certified to survive complete underwater submersion in demanding marine environments. Integrated Tactical Emergency Switch: Features an easily accessible top orange alert button to initiate instant emergency communication arrays during critical operations. Secure 2-Pin Screw Connector: Designed with an integrated threaded locking mechanism that anchors the cable firmly to the transceiver casing to stop accidental pull-outs. Clear Audio Speaker Output: Optimizes vocal frequencies to cut cleanly through ambient background machinery noise, wind howl, and ocean surf. Icom HM222HLWP Speaker Microphone Reliability: Built using reinforced, impact-resistant industrial composites to handle heavy drops on concrete decks or iron grates. Specifications Attribute Details Brand Icom Model/SKU Icom HM222HLWP Product Type Speaker Microphone IP Rating IP68 Waterproof (Submersible) Connector Type Secure 2-Pin Screw Locking Controls Integrated PTT and Top Emergency Switch Housing Material Impact-Resistant Commercial Composite Color Black Compatibility F1100D F2100D V86 U86 F1000 F2000 F3001 F4001 F3002 F4002 F3003 F4003 V88 U88 G86 T10 F29SDR F29SR2 F29SR V10MR V3MR F29DR3 41PRO Recommended Accessories Icom F1100D Digital Portable Radio (F1100D) — The primary handheld transceiver engineered to natively accept and secure this threaded 2-pin IP68 speaker microphone. Icom F2100D UHF Digital Portable Radio (F2100D) — A robust UHF communications radio that fully interfaces with the advanced audio pathways of this remote accessory. More Resources How Icom Radios Serve Maritime and Coastal Operations Frequently Asked Questions Is this remote microphone fully submersible in salt water? Yes. The Icom HM222HLWP carries a comprehensive IP68 environmental protection rating, allowing the housing to withstand complete water submersion. Following exposure to salt water, operators should gently rinse the microphone with fresh water and dry it completely to prevent mineral buildup over time. How does the top emergency switch communicate with the radio system? The top-mounted emergency button routes a dedicated signal path through the 2-pin screw connector. When pressed, it mirrors the programming of the orange emergency key on the host transceiver handset, triggering system alerts or distress signals immediately. Will this speaker mic work with standard non-threaded 2-pin radio connectors? No. While the pin alignment matches standard layouts, the Icom HM222HLWP utilizes a specialized collar screw assembly that physically tightens into the radio framework. It requires a compatible threaded radio housing to achieve its secure, waterproof seal.   Warranty 1-year manufacturer's warranty.

Read more less

Unlock Full DMR Digital Capabilities for Your R2 Fleet The Motorola HKLN4429 is an Entitlement ID (EID) license key designed to transform your analog-only MOTOTRBO R2 portable radio into a dual-mode Analog/Digital powerhouse. This essential software upgrade allows organizations to bridge the gap between legacy analog systems and modern Digital Mobile Radio (DMR) technology. By activating this license, your R2 hardware gains access to the superior audio clarity, increased range, and advanced signaling features of the MOTOTRBO digital platform without the need to purchase entirely new radio units. This upgrade is delivered as an electronic Entitlement ID, which is applied directly to the radio using Motorola’s Customer Programming Software (CPS). Once installed, the R2 can operate on both analog channels for backward compatibility and digital DMR channels for improved efficiency and security. This is a cost-effective solution for growing businesses and public safety agencies transitioning to digital infrastructure at their own pace, ensuring your communication remains future-proof. *Software key will be emailed within 48 business hours.  Key Features & Benefits Seamless Digital Transition: Enables DMR Tier II digital operation on the MOTOTRBO R2, allowing for a phased migration from analog to digital. Enhanced Audio Quality: Unlocks digital noise cancellation and superior voice clarity, ensuring messages are heard clearly even at the edge of the coverage area. Increased Capacity: Leveraging digital technology allows for more efficient use of your frequency, providing better throughput for your team. Advanced Signaling: Unlocks digital-only features such as individual calling, group calling, and enhanced privacy options. Hardware Preservation: Modernizes your existing R2 hardware investment, extending the lifecycle of your fleet without additional equipment costs. Electronic Delivery: The Entitlement ID is delivered digitally, allowing for rapid deployment and activation via the Motorola licensing portal. Specifications Feature Specification Product Type Software License Key (EID) Upgrade Type Analog to Digital (DMR) Applicable Hardware MOTOTRBO R2 Region North America (NA) Deployment Via Programming Software (CPS) Requirements Motorola Solutions Account Compatibility R2 Frequently Asked Questions How many licenses do I need for my fleet? You must order one (1) HKLN4429 license for each individual radio unit you wish to upgrade to digital capability. How do I install the license key? To activate the upgrade, you must have a valid Motorola Solutions account to authenticate in their licensing portal. The EID is then registered and installed into the radio using Motorola Customer Programming Software (CPS). Can the radio still use analog channels after the upgrade? Yes. Once the digital license is applied, the radio becomes a dual-mode device, capable of operating on both your existing analog channels and new digital DMR channels. Warranty Software licenses are non-returnable and are supported by Motorola Solutions. ALL SALES ARE FINAL. - REFUND POLICY Important Note: In order to activate this product, a Motorola Solutions account is required for authentication in their licensing portal. Programming software is also required and not included.

Read more less

Tri-Unit Desktop Charging Station for Slim-Profile Portable Radios Complete Fleet Power Optimization Consolidate your fleet power management with a single station that charges three critical devices simultaneously. The Motorola PMLN6701A Tri-Unit Desktop Charger is a genuine original equipment manufacturer (OEM) multi-device charging station engineered for professional ultra-thin portable radios. Built to maximize workspace efficiency, this innovative platform allows multi-shift operations to consolidate their hardware management footprints. The Motorola PMLN6701A provides an all-in-one charging solution that maintains stable power delivery to vital communication tools. The Motorola PMLN6701A is the updated version of the Motorola PMLN6701. Designed for hospitality staff, corporate security management, and event coordinators who rely on slim-profile transceivers, the Motorola PMLN6701A eliminates the need for cluttered multiple wall outlets. This dual-pocket docking system simultaneously services a primary radio handset, a standalone backup battery pack, and a wireless Bluetooth audio accessory via its integrated fly-lead. Before purchasing, fleet administrators must verify their equipment matches the 3.7V lithium-ion architecture of the SL series, as the Motorola PMLN6701A is not electrically compatible with higher-voltage heavy-duty radio lines. Key Features & Benefits Simultaneous Tri-Unit Charging: Replenishes an SL series transceiver, a secondary backup battery, and a Bluetooth accessory device at the exact same time. Integrated Micro-USB Fly-Lead: Features an easily accessible, flexible length micro-USB cable designated for powering operations-critical wireless earpieces and pods. Dual-Pocket Versatility: Accommodates both standard and high-capacity portable power cells inside its drop-in pockets without requiring specialized spacing shims. OEM Power Regulation: The Motorola PMLN6701A includes a certified AC power supply transformer to shield devices from overcharging and voltage spikes. Space-Saving Footprint: Eradicates desk clutter by replacing three separate standalone cords with a singular, low-profile desktop docking hub. Specifications Attribute Details Brand Motorola Model/SKU PMLN6701A Product Type Tri-Unit Desktop Charger Number of Pockets 2 Pockets + 1 Micro-USB Lead Input Voltage 110 VAC (US and Canada Plug) Power Source 120–240 VAC Dimensions 4.5 H x 2.0 W x 3.75 L Inches Weight 1.26 lbs Color Black Technology Motorola Original Compatibility SL2K SL7550 SL7580 SL7590 SL8050 SL8550 SL8550e SL7550e SL7580e SL7590e SL4000e SL4010e More Resources Can You Charge a Radio Battery Without a Charger? Safe Options and Risks Explained Frequently Asked Questions Can the micro-USB connector charge non-Motorola devices? The attached micro-USB fly-lead is engineered specifically to provide regulated current to Motorola Operations Critical Wireless earpieces and Bluetooth accessory pods. Connecting third-party cell phones or alternative hardware is not recommended and can result in improper charging thresholds. Does this charging dock utilize IMPRES battery diagnostics? No. The Motorola PMLN6701A is a standard rapid-rate charging station rather than an IMPRES reconditioner. It features standard LED status indicators on the base to show when a device is actively charging or fully powered. Can I charge a standalone spare battery without the radio attached? Yes. The rear pocket of the docking base is designed specifically as a standalone battery slot. It can charge a backup standard or high-capacity lithium-ion battery completely independent of whether the front radio pocket is occupied.   Warranty 1-year manufacturer's warranty.

Read more less

Hytera AN0435H23  Hytera AN0435H23 Stubby Helical Antenna: Low Profile, High Performance Stay connected with the compact and durable Hytera AN0435H23 stubby helical antenna. This UHF antenna is designed for optimal performance with your compatible Hytera DMR radios. Its low-profile design makes it ideal for situations where a longer antenna might be inconvenient, such as when wearing your radio on your belt. Key Features: Compact and Discreet: At only 9cm long, this stubby antenna won't get in your way. Durable Construction: Built with a helical brass core for enhanced reliability and longevity. SMA-Male Connector: Ensures a secure and reliable connection to your radio. UHF Frequency Range: Covers 400-470MHz for optimal performance in most environments. Compatible with the following Hytera radios: PD602i PD662i PD682i X1ei X1pi Benefits: Enhanced Mobility: The compact design allows for greater freedom of movement, especially when the radio is worn on a belt. Improved Durability: The brass core construction ensures the antenna can withstand everyday wear and tear. Reliable Communication: Provides consistent performance for clear and reliable communication. Warranty: 1-year manufacturer's warranty for peace of mind. Upgrade your Hytera radio with the AN0435H23 stubby helical antenna. Order yours today!

Read more less

Hytera 11530000000059 Volume Control Knob Precision Replacement for PD6 Series Radios The Hytera 11530000000059 is a genuine replacement volume control knob designed for the professional servicing of PD6 series portable radios. This high-quality component is engineered to restore the tactile feel and precise adjustment functionality of the radio's audio controls. Built to meet strict OEM standards, it ensures a perfect fit on the potentiometer shaft, maintaining the device's ergonomic integrity. Constructed from durable, impact-resistant materials, this knob is designed to withstand the daily wear and tear of industrial and field use. Whether you are performing routine maintenance or repairing a damaged unit, using this authentic Hytera part ensures the continued reliability and professional appearance of your communication equipment. Key Features Genuine Hytera Part: Ensures 100% compatibility and precise fitment for PD6 series digital portables. Ergonomic Grip: Textured surface provides a secure, non-slip grip for easy volume adjustments, even while wearing gloves. Durable Construction: Manufactured to resist the oils, dirt, and mechanical stress common in demanding work environments. Simple Installation: Designed for quick "press-fit" installation onto the radio's control shaft, reducing downtime during repairs. RoHS Compliant: Meets environmental standards for hazardous substances. Compatibility PD602i PD662i PD682i Specifications Part Number: 11530000000059 (HYT-11530000000059) Type: Volume Control Knob Material: Industrial Plastic/Polymer Series Compatibility: Hytera PD6 Series Manufacturer: Hytera Benefits Restore Functionality: Fixes issues related to missing, cracked, or slipping volume knobs to ensure accurate audio control. OEM Reliability: Using original manufacturer parts preserves the radio's internal components by ensuring proper shaft alignment. Professional Finish: Keeps your radio fleet looking and performing like new, which is essential for security and hospitality details. Warranty 1-year manufacturer's warranty.

Read more less

Hytera BL2016 Lithium-Ion Battery (2000mAh) Genuine OEM 2000mAh 7.4V Li-Ion battery for the Hytera PD982i. No memory effect. Drop-in replacement. The Hytera BL2016 is a genuine OEM 2000mAh lithium-ion battery for the Hytera PD982i digital portable radio. Designed specifically for the PD982i, it maintains the radio’s IP rating and rugged construction with a secure, precise fit. Lithium-ion chemistry delivers stable power output without memory effect, extending overall battery service life. Key Features & Benefits 2000mAh Capacity: Consistent, long-lasting talk time for extended shifts and demanding operations. 7.4V Lithium-Ion: Stable power delivery without memory effect for a longer service life compared to older battery chemistries. Genuine Hytera OEM: Designed to Hytera specifications for a secure fit that maintains the PD982i’s IP rating and durability. Drop-In Replacement: Installs directly in place of the original BL2016 — no tools or adapters required. Specifications Attribute Details Brand Hytera Model / SKU BL2016 Chemistry Lithium-Ion (Li-Ion) Capacity 2000mAh Voltage 7.4V Country of Origin China Compatibility Model Series PD982i Hytera PD900 Series DMR Recommended Accessories Hytera MCA08 Multi-Unit Rapid Rate Charger — Multi-unit rapid charger with power supply for PD series batteries. Hytera BL2511 Smart Li-Ion Battery (2500mAh) — Higher-capacity smart Li-Ion alternative for the PD982i. Hytera BL2509 Low-Temperature Li-Ion Battery (2500mAh) — 2500mAh low-temperature variant rated to -30°C for cold-weather operations. Frequently Asked Questions Is the BL2016 UL rated or intrinsically safe? No. The Hytera BL2016 is not UL listed and is not intrinsically safe (IS). It is not approved for use in hazardous locations classified under NEC Article 500 or ATEX/IECEx standards — such as environments with flammable gases, vapors, or combustible dusts. For hazardous location use, consider the Hytera BL2415-Ex, which is the explosion-proof, intrinsically safe battery option for the PD982i. Consult your safety officer or a certified hazardous location specialist to confirm the correct battery for your environment. Are there higher-capacity battery options for the PD982i? Yes. The Hytera BL2511 provides 2500mAh with smart battery management, and the Hytera BL2509 offers 2500mAh with a low-temperature rating down to -30°C for cold-weather environments. Does this battery have a memory effect? No. Lithium-ion batteries do not exhibit memory effect, so you can charge the BL2016 at any state of discharge without reducing its long-term capacity. Warranty 1-year manufacturer’s warranty.

Read more less

High-Acoustic Multi-Variant Digital Transceiver Platform Scalable Enterprise Fleet Communications Across VHF and UHF Bands The Icom F1100D and F2100D Series represents a highly versatile generation of commercial handheld business radios engineered to adapt smoothly to diverse operational roles within a single workforce. This comprehensive product line spans across both VHF frequencies (F1100D models) and UHF frequencies (F2100D models) to ensure clear, high-penetration signal propagation whether your team operates across open industrial yards or inside high-density concrete facilities. By consolidating your fleet onto a unified hardware architecture, deployment becomes streamlined while maintaining specific user interfaces tailored to individual worker responsibilities. To satisfy different tier workflows, this platform divides its physical designs into three distinct hardware configurations: a streamlined no-display version for plug-and-play simplicity, a balanced middle-tier layout featuring a display with directional keys, and a heavy-duty multi-button model with a full numeric pad for complex data routing. Every unit in this consolidated series shares an industry-leading 1500 mW acoustic internal speaker system that works alongside a specially contoured chassis frame to amplify vocal frequencies over extreme ambient warehouse or construction noise. Built to withstand severe environmental stress, the entire family features ruggedized IP67 waterproof enclosures alongside strict military-grade structural resilience certifications. Whether managing local retail operations or directing multi-site industrial plants, this agile system delivers maximum operational uptime. Model Variants Model Frequency Band Interface Style Display Controls Channel Capacity F1100D VHF (136–174 MHz) No Display None No Keypad 16 Channels F1100DS VHF (136–174 MHz) Display with Basic Keys 8-Character LCD 4 Function Keys 128 Channels / 8 Zones F1100DT VHF (136–174 MHz) Display with Full Keypad 8-Character LCD Full Alphanumeric Pad 128 Channels / 8 Zones F2100D (Low) UHF Low (400–470 MHz) No Display None No Keypad 16 Channels F2100D (High) UHF High (450–512 MHz) No Display None No Keypad 16 Channels F2100DS (Low) UHF Low (400–470 MHz) Display with Basic Keys 8-Character LCD 4 Function Keys 128 Channels / 8 Zones F2100DS (High) UHF High (450–512 MHz) Display with Basic Keys 8-Character LCD 4 Function Keys 128 Channels / 8 Zones F2100DT (Low) UHF Low (400–470 MHz) Display with Full Keypad 8-Character LCD Full Alphanumeric Pad 128 Channels / 8 Zones F2100DT (High) UHF High (450–512 MHz) Display with Full Keypad 8-Character LCD Full Alphanumeric Pad 128 Channels / 8 Zones Key Features & Benefits Acoustically Amplified 1500 mW Audio: High-capacity speaker cones push clear voice paths over ambient mechanical roars or howling outdoor winds. Dual-Split UHF Availability: Offers targeted hardware built specifically to match localized low-UHF systems or high-tier public service frequencies. IP67 Waterproof Protection: Complete IP67 structural shielding keeps internal electronics running after water submersions up to one meter deep for thirty minutes. AquaQuake Water Clearing: Drives a fast low-frequency acoustic buzzing sequence to instantly push trapped water beads away from the speaker fabric. Digital Over-the-Air Alias Display: Instantly projects incoming user names directly onto LCD-equipped models without complex background programming. Automated Worker Protection Monitors: Integrated physical movement tracking logs severe impacts or stagnation to execute automated emergency voice alerts. Specifications Attribute Details Brand Icom Voltage Input 7.5V DC Nominal Operating Temperature -30°C to +60°C Audio Output 1500 mW Transmit Power 5W (VHF & Low-UHF) / 4W (High-UHF) Military Standard MIL-STD-810G Voice Codec AMBE+2 What's Included Description SKU Status Digital Handheld Transceiver Selected Variant Included 2400 mAh Li-Ion Battery BP280 Included Desktop Charging Cradle BC213 Included Wall Power Supply Adapter BC123SA or BC242 Included Spring Belt Clip MB133 Included Band Antenna Factory Selected Included Recommended Accessories Icom HM222HLWP High-Power Speaker Microphone – A heavy-duty, IP67 submersible external microphone that matches the transceiver's 1500 mW audio output for clear over-the-shoulder monitoring. Icom BC214 Six-Unit Multi-Charger Station – An industrial six-bay rapid-charging drop-in bank designed to charge up to six separate batteries or fully assembled radios simultaneously. Icom HS94LWP Earphone Headset – A commercial-grade lightweight over-the-ear headset with a fully waterproof connector plug for hands-free communications. Icom OPC-478UC USB Programming Cable – Required cable for programming the F1100D and F2100D series using Icom CS software. Icom UR-FR6300 Digital Repeater (50W UHF) – Extend coverage across large facilities or campuses with a compatible Icom digital repeater. Shop All F1100D & F2100D Accessories More Resources Icom F1100D / F2100D Data Sheet (PDF) Frequently Asked Questions Does the Icom F1100D or F2100D need to be programmed? Yes, these radios must be programmed with your licensed frequencies before use. You'll be asked at checkout whether you'd like programming, or you can add it in advance via our Atlantic Radio Programming Services page. To program them yourself, you'll need the Icom CS programming software and the OPC-478UC USB programming cable, both sold separately. What is the purpose of the Over-the-Air Alias feature? On display-equipped variants (DS and DT models), this function captures identification codes embedded inside digital transmissions and instantly decodes the signal to print the caller's actual name on your screen, completely removing the need to manually program comprehensive user lists into every radio. How long will the standard battery pack operate in the field? When paired with the standard BP-280 battery pack, the VHF variants deliver up to 18 hours of typical operation. The UHF models provide approximately 17 to 18 hours of field runtime depending on your configuration, easily sustaining multi-shift work cycles. Can I program both digital and analog channels into the same radio? Yes, the series fully supports analog/digital mixed-mode operation. The internal digital processor scans across conventional analog frequencies and modern digital channels concurrently, automatically replying to whichever protocol initiated the call. What does the Surveillance setting do for security staff? When activated, the radio temporarily blocks all audible notification beeps and turns off the active status LED indicator lights, letting personnel receive incoming dispatches completely silently without giving away their location. Are special tools needed to clear water from the speaker grill? No extra tools are required. Activating the integrated AquaQuake feature forces the radio to emit a low-pitched buzzing tone through the speaker module. The structural vibration mechanically breaks surface tension, expelling trapped water from the mesh instantly. Warranty The Icom F1100D and F2100D series includes a 2-year manufacturer's warranty on the radio and a 1-year warranty on included accessories. Please contact Atlantic Radio Communications for warranty claims, support, or replacement inquiries.

Read more less

Replacement Volume Knob - For EVX-S24 The Motorola RA163460A is a replacement volume knob designed specifically for the Motorola EVX-S24 digital DMR two-way radio. This part is a crucial component for restoring a damaged or worn-out knob, ensuring you can maintain precise control over your radio's power and volume settings. The Motorola RA163460A is the updated version of the Motorola RA163460. This replacement knob is a straightforward and cost-effective solution for maintaining your communication equipment. The Motorola RA163460A replaces all of the original part codes BA1634600, BA163460A, and RA1634600, providing an updated and dependable part for your EVX-S24 radio. Key Features Replacement Volume Knob: A crucial part for repairing a damaged or faulty knob. Specifically for EVX-S24: Ensures a perfect and secure fit on this radio model. Replaces Original Part Codes: Supersedes the original BA1634600, BA163460A, and RA1634600 part codes. Restores Functionality: Replaces a broken knob, bringing the radio back to optimal operation. Compatibility EVX-S24 Benefits Cost-Effective Repair: A simple replacement part to fix a common issue, avoiding more expensive radio repairs. Maintained Usability: Ensures precise control over the radio's power and volume levels. Extended Radio Lifespan: Enables necessary repairs, helping to prolong the life of your EVX-S24 radio. Perfect Fit: Designed for a precise fit, guaranteeing a secure and dependable connection.   Warranty 1-year manufacturer's warranty

Read more less